Roll Forming Seamless Gutters

[@jeffreyyeager1398]

We're supposed to be getting ours done today I was just trying to show my boys exactly how this is done. I worked for a company that made Venetian blinds and they use this kind of a machine to bend the metal. I think it's an awesome piece of technology. Thanks for the video.

[@vikings844]

So that's how it is done! That machine is sweet

[@therobbyk85]

Nice to see that you are using Geocel for your caulking. Great product.

[@fionaliu8177]

if you need this machine ,whatsapp [phone]

[@gutterusa]

thats the you do gutters :)good job

[@wadefmiller]

The two responses for two of the comments. First his hang fast hangers sit about 1/2" down, you can get your flashing inside your gutter easily enough. No need to notch the flashing though. Second no need to chalk the outlets with the corrugated down spouts. The water that does flow on the outside of the outlet still goes into the down spout.

[@ChrisSmith-ig9jq]

That 1/2inch is not good enough. I never never clip my hangers to the back. Its not only stupid but it doesn't save any time.

[@CC-xl9ow]

I've been doing gutters for 20 years and I've never seen someone stand on that side of machine working from the back of the gutter and reaching across left handed to pull the guillotine down. That just seems really akward

[@jackassdude2010]

Chris Chacon hahaha

[@Slepnair]

Might be for filming purposes. Other side would put the camera in the street.

[@darryltaylor9916]

..agree, plus the downspouts go on the passenger side, because you pull up to a house on that side and you don't have you reach across the guy making pieces...also if you are reading measurements it's easy to get them backwards...when you are looking at the gutter backwards..00.02

[@JohnODonovan1]

Caulk the end caps before installing them for a better longer lasting seal.

[@fareedrasool8758]

very nice machine thanks for the engeener

[@kennethirwin9657]

Not trying to "HATE" on your video, but the correct way to install a gutter is to put it under the gutter apron on the roof. If you have the hangers clipped to the back of the gutter before you install it how do you get the flashing correctly into the gutter? Do you notch around each hanger? or do you not use flashing?

[@lrsoxfan]

You bend the drip edge (flashing) up before you install the gitter

[@user-wc2ho7im7j]

You are right.

[@fabioapelbaum8840]

How can i find a track like yours to come to my home in phoenix AZ and cut to size instead of using home depot standard size?

[@ErcanALTINEL]

Do you have rainfall in AZ? 🙄

[@protoroc]

Seems easier than painting, tho I bet that one machine costs more then all my painting tools.

[@quwzada21]

Wrong a Graco 5900 gas powered paint sprayer cost about 6,500 hundred dollar and you can paint about 500 gallons of paint in one day that's about 24000 SQ feet of wall space

[@tuckerjarrett3385]

Since we’re comparing the price of equipment. I believe it costs. Bit more to start a gutter company. For a 5/6 in. Combo K Style Gutter (5” is normally standard for residential) I found some for $10,500. Plus all the other specialty tools needed for gutters will cost another $1000 if you go with the bare minimum.

[@haroldharbour252]

@@tuckerjarrett3385 wrong a 5/6 combo new tech machine is $7500 dollars i know because we sell them where i work at karrs building supply here in houston

[@HEADSPINSTV]

@@haroldharbour252 please send info. looking to buy

[@BensonsHandyAndy]

I want one. A real $$$$ maker.

[@longermed302]

My friend can supply it his whatsapp is [phone]

[@fionaliu8177]

if you need this machine ,whatsapp [phone]

[@jimavil5395]

LongerMed How much do they run for

[@jvirg]

where did you get that punch ?

[@lrsoxfan]

Petit tool in Thomaston ct. Sells them

[@andrewtang2881]

i would like to buy one on these machines. can share the manufacturer and brand of the machine?

[@callguttersminnesota9073]

#John The two responses for two of the comments. First his hang fast hangers sit about 1/2" down, you can get your flashing inside your gutter easily enough. No need to notch the flashing though. Second no need to chalk the outlets with the corrugated down spouts. The water that does flow on the outside of the outlet still goes into the down spout. @W Miller

[@stephengraham4127]

Hey, did you ever made that purchase, I saw you mention getting a gutter machine

[@fionaliu8177]

if you need this machine ,whatsapp [phone]

[@MACTECmachinerycoltd]

Quality &fast roll former. WA+8613606633835. Http:mactec.cn

[@haroldharbour252]

another option is a new tech machine 5/6 combo machine contact karr's building supply 4939 milwee st. houston texas 77092

[@goku8558]

me interesa la maquina cuanto vale

[@goku8558]

Buen dia quien vende esta maquina y cuanto vale

[@juniorblandon1184]

Hola me interesa una máquina de esa dónde puedo comprala y cuánto cuesta

[@amadoryranon7741]

I wonder how this machine cost?

[@Flyingtankers]

$8000 to $16000 CAD..

[@amadoryranon7741]

@@Flyingtankers thanks. Mind if you tell me the company or the supplier. I am interested to have business like this in the Philippines

[@harjitsinghsteeldoorindust8898]

I am India

[@gutterdownspoutimprovement7418]

si

[@rlta04]

Meh

[@pedrorenipereira8207]

Quanto custa em R$ essa máquina?

[@user-wc2ho7im7j]

$6500 and up.