Roll the Joists Ep.40

[@jefff6167]

These are, in my opinion, among the finest videos “anywhere”. They are calming, unpretentious, mildly philosophical, somewhat spiritual, instructive and honest. Thank you so much for taking the time to make these videos. Thanks AvE for the introduction.

[@ramdizzle9133]

You've never seen this old house out of New England. Norm abram was voted America's carpenter and has one of the most calming voices.

[@johnjaso1349]

@@ramdizzle9133 Norm is a craftsman for building furniture and specialties. ive never seen him building homes by himself.

[@ramdizzle9133]

@John Jaso he has built plenty of houses on his own, That's what he was doing before he started the new Yankee workshop.

[@johnjaso1349]

@@ramdizzle9133 i stand corrected. however , scott has a special thing going on. and Norm is special in his styles.

[@ramdizzle9133]

@John Jaso yes. Either way, they are teaching correct ways to do things. This younger generation needs to make sure to pay attention and take notes. Another good builder is Larry Haun. However, his videos are a little dated, but hell of a framer.

[@Lanxe]

We all need a bloke like Steve in our lives. Nothing like working with an old mate who's a pro and on the same page.

[@Si-Al-Ti]

And all of us have thanks to youtube! :)

[@omom564]

Agreed! I would of lost it if the joist I was trying to level was being knelt on by some saying "a little more! "...🤔

[@misternormL]

Same page as he's better than you at everything except that thing you'd object to *wink

[@TheTomBevis]

Steve looks just like my uncle Bob, and Ace looks just like my dog Lucy. lol

[@AlphaMachina]

@@omom564 How else do you expect him to check the level in any sort of convenient and timely manner? Knocking a wedge in with a hammer under that joist makes little difference whether he's kneeling on it or not. The wedge will drive it regardless and with ease.

[@mightyroostercontractinglt8755]

There is nothing I can say , that has not already been said. You are the teacher we wish we had, and are grateful we have. (its never too late) I hope its not all old dog like me watching. The up & comers are lucky, if they find this channel. Thank you for this gift.

[@joshjohnson3264]

If being a 30 year old with 7 years of custom cabinetry that just started framing in April counts, then I feel lucky. Just discovered this fella today, only 3 videos in and I’m hooked. The love of learning is the thing that makes me love carpentry so much. Technique is such a beautiful thing, and hard for most people to teach. I’m endlessly grateful to have discovered this channel.

[@uglycouzin]

Hi Scott and Nate. Thanks for continuing to make this channel and share part of your life with the KZbin community. I am blessed to be entertained while being educated by you.

[@boghbayles4637]

I love this channel best all around building channel on KZbin , everything about it is just right from the commentary to the pacing to the content .

[@mindaugasnomnom3548]

yes it's like do it right first time "holmes on homes"

[@commandofaku]

kzbin.info/www/bejne/m4fFlHx_aLJ5nLs

[@rigobertoolivo1646]

Bogh Bayles

[@KingdaToro]

I feel like this and Acorn To Arabella are basically tied for this honor, yet they're totally different. EC is an old pro sharing his massive experience with us, A2A is two guys tackling a massive project they've never done before, but have certainly done their homework on.

[@angelmoreno5058]

Have you watched the crazy framer?

[@philreynolds7216]

A couple of old pros working together is a beautiful thing to watch, and learn from. You don't get the job done quickly by hurrying, you get it done quickly by knowing where to put the extra attention and effort, and how and where to waste zero motion and effort.

[@cncwoodworxroc6881]

From a pro, this is one of the best statements I've heard. This should be taught to all apprentices, driven into thier minds.....and reinforced to all old pros....love it!👍

[@trevorcourt2306]

As someone who works in a trauma operating theatre your saw cutting method at 3:30 is the sort of lunacy that keeps me employed.....

[@abdulelkhatib2674]

I don't know why but I find that hilarious

[@trevorcourt2306]

@David Johnson Gee I don't know David holding a piece of timber in your hand and pushing a circular saw through it..... What could possibly go wrong!!! 400 fingers a year get removed by circular saw accidents in Australia alone...

[@aaronvanderpol1210]

I used to use a chainsaw without chaps until I learned about KZbin. Watched like 2 videos and refused to ever fire one up again without them on. Maybe that makes me a scared y pants but man those chainsaw accidents are gory.

[@oldschool6345]

Lucky you to have friends like that. It's not only great to have them but to have the trust you share, you have no doubts what he is capable of. Having former bosses as friends means you're living a good life. Those who never have them as friends don't know what they're missing. Thanks for sharing

[@bobbyauvil9885]

I grew up in Roseburg, and, have been in residential framing (and, now pole barns) most of my life. Your channel has a special place in my heart, brother. Keep up the great work!

[@umoro76]

Perfect..just long enough for lunch. Hello from Lodi CA from a new construction plumber...I appreciate all you do to cut my learning curve. Your channel has gave me focus and motivation to go ahead and be owner/builder for my small home

[@wreckless_-jl6uu]

*Man, I really like your channel here..!! You really know your stuff and I’ve learned more from you in 1 video than I have in some of the years I’ve done this type of work!! Thanks ALOT!!!*

[@CrosswindSurfer]

Ok well... Im not sure if youll ever read this, but this WHOLE project, channel, ALL of it... is SO wholesome. I just got into construction with a VERY detailed oriented mind, with a dream to build my own home some day. This is the most incredible, project that I feel I actually get to be apart of! Love the content, CAN NOT WAIT FOR MORE!!!! ONLY EPISODE 40!! WOOOHOOHOHOHOHO!!!!!!

[@jameslikesturtles8254]

I’m in the same boat, this series helped me decide on carpentry as my trade of choice and a year later I’ve moved away from my hometown to start my career building custom homes. A kind voice with wise words is a powerful thing, very thankful to have come across this series.

[@wilkinsoncarpentry6278]

I love it, I’m watching this thinking “look at these 2 old blokes still building together “ And then you say you have known each other since the age of 14. Wow . And the knowledge that just pours out is incredible. I been doing Carpentry for 18 years and every time you talk about codes , ways to do things , reasons you do things. I take it all in. 👍👍

[@stewartstewart2693]

Love your friend ship and your workmanship. Been a carpenter for 41 years. There nothing better then to have a mentor and to be a mentor

[@para-cad_llc]

As always, great video, sir! You're about the most calm and well-thought-out carpenter I have ever seen. Thank you so much for your videos. I was a framer for a couple decades and I appreciate the truth you share. I now design homes for custom builders and have been pushing to steer away from engineered lumber. Trusses and I-joists burn incredibly fast, so we either add fire-proofing, sprinklers or design using nominal lumber. For gang cutting, I once set up a cut station using (2) 48' i-joists as a table with a sled and mounted (2) 12" SCMS at each end. We were able to precision-cut every joist we were using on the apartment complex we built. I've never been under such time requirements to have to frame to speed in that way of cutting. It looks cool though....you da man! Glue in the hanger was something we also stopped doing. Eventually we found that when the glue cured, it would sometimes move in the hanger. A rubber compound ended up better for us. We only glued wood-to-wood or wood-to-concrete. I wish you every success and look forward to watching your project evolve to its conclusion.

[@rightlanehog3151]

Thanks for the thoughtful and brave comments which 'dare' to question the methods and choices employed in this video series. I think every young builder ought to be sent to Europe for a month to examine low-tech old buildings that have stood for 500-1,000 years. They will learn that an un-level floor won't mend itself over time nor will an out of plumb timber post. Another important lesson will come in the discovery that not a single square inch of Disoriented Strand Board was built into any of those ancient structures.

[@lloyddahlen1141]

Thanks again for sharing your info on deck framing, I am a retired carpenter of 45 years it’s good to see work been done right thanks again 👍

[@dbryceman]

Having framed houses for a few years, and walking around my own house driving finishing nails through carpet to stop squeaks, I really appreciate your attention to the floor system. I didn't build my house, so I spot every defect every day, but I hope to build my own house soon. It's relieving to see someone who really cares about the work. It makes a job worth doing. Much respect for you and Steve, sir!

[@paulunderwood8960]

Use finish screws bro trim screws

[@delinquentdesign]

Thank you for this. Watching you build this house really makes me miss working construction with my buddy Pete Ortiz. Ever since he passed away i had an emptiness inside the longing to build something from nothing the need to produce and create a home. May he rest in peace. He was good buddy and I thank him for his knowledge.

[@cncwoodworxroc6881]

I'm truly sorry for your loss of not only a friend but what sounds like a mentor. Finding both in 1 in a lifetime is a gift to be cherished. In his honor, never let the passion to build and create die, give that same gift to someone by becoming a mentor to another to fulfill his place on earth. All the best.

[@delinquentdesign]

Chris J's Clockworx yes you are right ill take that advice and thank you for your kind words.

[@TheMcKeand]

Great work from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 great work, look forward to the series, it’s great to compare things fro here and the US, your a true craftsman 👍

[@howacarworks]

You are doing the whole world a service here. The quality has just gone up and up. People are going to be watching this in 30 years time.

[@abdulelkhatib2674]

next Larry Haun House Framing Series

[@MD-cd7em]

I COULD SEE STEVE KNEW WHAT HE WAS DOING...YOU WORK GOOD TOGETHER....A WELCOME ADDITION!!.. THANKYOU GUYS

[@josevela4737]

I have nothing but respect for this gentlemen he have for far the best and more explicit videos on all the aspects of construction. Thanks for all your video's. Every time I look at a video of yours I learn something new. I have been a carpenter for over 20 yrs and I keep looking for new techniques. Thanks again.

[@cheesemaster113]

Whoever apprentices under this guy is going to go out and do great things.

[@davetheflave2570]

Your channel is is not only inspiring but very informative and is an excellent display of how to go about being a carpenter. I 33 years old and learn something new every time I watch your videos. It has helped give me a better perspective with my job. I am an assistant Forman for a production framing company so at times I am walking and punching 5-7 houses in a weeks time. Measure twice, cut once or in your case for these joists measure three times to be at complete peace. Thank you sir!

[@linkdude64]

A few times over the course of this series it has really hit me how incredible a project this is. Think of all the thousands of people, years from now, who will be learning from this great multiplier of information - a teacher from the school of hard knocks!

[@n3qdz]

Please some manufacturer send Scott the latest cordless tools of nail guns and saws. Dragging cords and hoses is a real pain. Awesome work loving the time to take to explain practices and the time in the project. Lucky person who get to purchase this home. Thank you Scott for recording your craft to teach reflect on when we are gone this place and never forget there are people who love what they do. Thank you sir!

[@tani357]

"That is never an excuse to do something ugly if you have the capacity to do something that is handsome." Truer words were never spoken.

[@Quackerstacker1973]

So then riddle me this why is that nice man hacking those floor joists with a chain saw.

[@tani357]

@@Quackerstacker1973 Why does an ice sculptor use a chainsaw? Because they're artists.

[@bradford5089]

@@Quackerstacker1973 Chain saws actually cut very straight and clean when used properly. They are an excellent choice for batch cutting joists/rafters, safely cutting rafter tails to a line to receive a gutter board, cutting beams, etc. A beam saw attachment for a circular saw is similar, but is much more limited (and somewhat more dangerous, perhaps) in scope. Plenty clean enough work for framing, and quite a time saver! And I've seen old men do cleaner woodwork with a rusty pruning saw than some KZbinrs with thousands of dollars of power tools. The tool does not make the craftsman (except maybe with crown molding, then you really do need the right tool).

[@Brackus2]

I love that you have a deep history with the wood/lumber industry. The section around 8 minutes in shows it greatly. Thanks for all that you do!

[@rafaljanicki9750]

You Sir are an inspiration!. Thanks! I will say this over and over. As a side-note, seeing You guys working like this reminded me of yet another video that sparked my interest in stick-frame construction (I`m from Europe, framing is not that popular here). It reminded me of Larry and Joe Haun and their video series. Keep up the work, sure as hell I`m learning a LOT. All the best!

[@steamchief]

I am in the process of helping a friend frame his house. There are three of us on the project. I and the homeowner have some basic carpentry skills. The third person has done some framing. Your videos have helped me understand all the little things that can get missed as we build this house. Yesterday we finished leveling and bracing the stem wall forms and this afternoon we will pour the stem walls. As we go along, I will rely on the information in your videos to help prevent any little foxes. Thank you for sharing all of your expertise especially with a young father that wants to build his own home.

[@dannyderamus3524]

Pros doing pro work. Your camaraderie with Steve really shows thru. Great work

[@xtv007]

First of all let me say that your knowledge, work ethic and finished product are second to none. Second, as a floor covering mechanic I am a firm believer in spending a few extra minutes up front to avoid spending hours on the back end. Time is money and you're not making it if you're going back to fix something that you had complete control of during the installation. Thanks for sharing your expertise and giving us the bar to aspire to. Much respect to you.

[@tyvanvleet]

Always nice to open up a video that’s gonna be full of knowledge!

[@squirrelydan5767]

Scott, I just want you to know that you're my hero and my idol. I aspire to be as cool as you one day. I'm a GC with a VERY expansive background including logging and metalworking (and plumbing, electrical, fine woodworking, tuckpointing, bricklaying, general masonry, concrete, automotive/mechanical, andany other things) and you've helped me to make use of skills I already had that I never would have thought could be useful in other trades. I've been using chainsaws since I was 8 years old but until I watched your videos, I never considered that I could use my chainsaw skills for framing and concrete forming but now, every framing, forming, or demolition job I take on, I always bring at least one chainsaw (usually my Stihl MS271).

[@ryandury]

Man, i love this series. As a software engineer, this makes me want to head back to school and start building in the real world

[@rudolphsteiner6797]

Hope you are ready for a large pay cut... unless you want to be a contractor... As a contractor you can make more money than you would as an engineer.

[@MrBlu334]

Hello and I hope you and family are well - being way over in Northern Ireland and watching how your house build progresses is fantastic - your knowledge and explanation of the progress is again, fantastic. I've been following your videos and journey for few weeks now and I wana say thank you for sharing your adventures. Take care and I wish you all the best, I'll be watching every step 👍🙋‍♂️

[@denisricher1349]

Ken, So nice to get to this point..... especially after all the Planning, Retention, Footings, CMU's etc... Real Nice Job

[@Will_DiGiorgio]

Watching this is a great juxtaposition from growing up watching This Old House for years. As much as I've learned about how to fix and add to what's already there, I'm learning just as much in this series about what they really don't focus on, new construction! I don't think I could imagine Tom Silva with a Stihl running it through a bundle of engineered joists! That's hardcore! Thanks Scott, loving the series!

[@JackFlash870]

30 minutes, now that is a treat

[@semajbest2324]

I started off in roofing then after about 15 years i started installing residential doors and trim work...i really enjoy watching these videos..very relaxing to me

[@bradfordlunt1468]

Shimming the center span is an example of what you will never get with a production framing crew in these parts anyway. It is common to insist they replace cracked roof joists that they have scabbed scrap to strengthen. They also push the +/- 1/4" on every fit up. A common reply is "oh the dry wall cover that". I have run off more dope smoking framers than I can count on two hands. The quality you are displaying can only be gotten if you do it yourself. Love your videos!

[@jimc4731]

I agree, all contractors know what they should do and how to do it, but many times ignore it unless called on the deficiency and then try to talk out of it. JIM

[@justaguy427]

Scott you are one of a kind.. I've known a lot of "tradesman" through my life, but you sir are a captain of industry. I'm glad you're making these videos because finding all of this quality information in one spot is really hard to do.

[@antonleimbach648]

That was some nice work with that chain saw trimming those joists. Perfectly square.....wow.

[@ben-vf]

What a show off !!!

[@tomitstube]

don't forget the "guide cut" with the circular saw. a long bar chain saw, and a sharp chain.

[@SteveoAtilla]

And he spent a year or two (or a dozen) cutting timber in the northwest. Has a few hours on a chain saw. Nice work!!!

[@HelenaOfDetroit]

Good shout out to blacksmithing. Its been my hobby for 3 years now and I'm still absolutely in love with it.

[@wildtimbrown]

Have you watched his blacksmithing videos? He has a bunch of great ones!

[@HelenaOfDetroit]

@@wildtimbrown yes I have! That's how I found his channel and how I got even better at the craft

[@marshallmoneymaker8322]

As a retired fire fighter I would say with you using modern engineered products, I hope and would recommend including a residential fire sprinkler system. While engineered pro, there are as expected cons - and the biggest con is fire load and failure quicker than stick lumber. Water damage is easier to fix than fire damage, not to mention the safety for fire fighters entering the structure for extinguishment. Just a thought!

[@moaski]

I saw a statistic provided by my local fire department (of whom my wife's cousin is chief) stating that in the 1960s, people had on average 17-minutes to escape their homes safely during a fire. Nowadays, that time is 3-minutes!!! The reason: all of these modern, man-made, synthetic products we build and furnish our homes with... they are much more combustible, and ignite very quickly.

[@garyryman4947]

Couldn’t agree more!

[@somegoddamnguy]

@@moaski that being said, you'd much rather be below a modern glulam beam than a steel one during a fire,

[@TheRyGuyRy]

I came here to ask the very same question.

[@GarwoodNick]

This is a valuable perspective and as a result of your comment I will definitely consider fire suppression for future projects.

[@Big_Tuna53]

Awesome videos EC! My father was outside sales for Huff Lumber Co. selling engineered joists, Glu-lam beams, and beams with hand hewn finishes! He was a mans man, had a never give up attitude (like you), and I wish he was still here so we could chat about your videos, lumber, tools...etc. I tip my hat to you Sir! Thank you!

[@MusicalMemeology]

This is such a wholesome channel and you’re a great teacher. You’re the type of people who built the amazing world we all live in amd inherit. We are truly standing on the shoulders of giants. If only kids would watch and learn this rather than watch rap videos that glorify murder and crime we could all live in a better world.

[@matthewdefinis9303]

I truly agree with that

[@BillyGoatsAdventures]

I have enjoyed every video you have made. Thank you for the quality family friendly content. This 25 year 110volt to 500kv electrician appreciates the effort and quality! Very refreshing indeed!

[@vincenttanguay4198]

I watch all your videos and they are a source of inspiration. I do this kind of work all week long it's friday and i'm tired. But watching this video just makes me want to go out and build something!! I whis i would have had a mentor as knoledgeble as you in my aprenticship. Cheers from Montreal, Canada! By the way the music is epic!!

[@fredblair8694]

I'm absolutely not generally a fan or admirer of American construction techniques but if I'm looking for great quality instruction on American ways of doing construction this is truly the only guy I trust for reliable advice absolutely the very best

[@tysonwashburn7510]

I am addicted to all of your videos. Made me want to reframe a new truss system for my chicken run roof.

[@thanhhuynh175]

As an engineer, its always amazing to see the ingenuity and creativity of veteran contractors at work. Every movement is so precise and every action with purpose. A joy to watch.

[@cougill_trim_and_cabinets]

You’re really making a new classic here guys. Like the Larry Haun series for a new era. Greatly enjoying it 👍

[@skywellconstruction8095]

Anyone who doesn't know Larry Haun then look him up. I have purchased his videos and make my guys watch them before starting a big job, just as a refresher on how to build efficiently and correctly. I agree, Steve is the next generation of 'how to' and this series is unbelievably thorough and detailed. Thank you Steve!

[@getemboi730]

This video made my day. The guys under my leadership think I'm crazy for believing in quality craftsmanship of this caliber. the master carpenter is a dying breed. thank you sir for this great video

[@johntenhundfeld1529]

Kudos to you and especially to your son on the excellent camera work. The view from the crawl space is very instructive.

[@edshuttleworth1549]

Somewhere here you mention metal working. I am a 75 year old tool and die maker. Metal working is like carpentry very satisfying. I am working at a shop a friend and I started a few years ago. I work now because it is satisfying and for me fun finding solutions for building tools and production equipment. I am watching your videos as my Daughter lost her husband 2 years ago and recently lost her home on Sanibel to hurricane Ian. I haven't built a house or addition in 20 years so I truly appreciate your bringing me up to date on the new materials available. Keep up the good work!!

[@joeconnelly7875]

I work for a lumberyard in Ohio designing Engineered Wood Products (EWP) for floor and roof systems, and I am frequently shocked at the appalling lack of knowledge and concern on the part of framing carpenters and other skilled tradesmen when it comes to the intricacies of storing and installing I joists and LVL beams at the jobsite. I nearly fainted when you actually referred to the installation guide that is so critical to a good installation that will make happy homeowners. Kudos on your video and commentary. This is the way an I joist job should progress. Prior Planning Prevents Piss Poor Performance!

[@user-xt1vs2oz3b]

"proper prior planning prevents piss poor performance" you forgot the proper. 😁

[@tedmcnair9709]

V failing to plan is a plan that is certain to fail!

[@5W5Y5]

So glad I found this channel. I am a hobby Smith, and have worked with a wonderful Master craftsman of that trade. My primary occupation is in the electronics engineering industry but I would love to be able to build like this! I find working with my hands much more rewarding than working behind a keyboard, and so glad I found this channel. Your video on string lines was very basic and simple, but to guys like me with no experience it was a gem! Keep up the good work!

[@wildtimbrown]

I like what you told us about Steve there at the end. He had already reminded my of Larry Haun. I don't know any higher praise for a framer!

[@donalso]

you are the kind of people I like to work with! integrity and purpose!!

[@zmhouse35]

Proud residential framer from St. Charles MO. So excited to see how you guys do it out there. I'm like a kid at Xmas whenever the next video comes out.

[@YoureASquidYoureAKid]

Heyyy same here but from O'Fallon MO. Hopefully you don't work at McBride...

[@ivanrico961]

Big shoutout to this MAN this KZbin channel is solely responsible for me moving up and getting a raise at my home remodeling job big ups much respect 🙏🏼

[@sh839c]

These videos are over the top in class and content.

[@cubacereos6851]

To have the knowledge how to build the house is one thing. To know how to pass this knowledge to the others is rare talent. This is the best series ,and I watched it twice already.

[@dalepatterson1748]

Easy to listen to, easy to learn from, always informative!! I have learned so much from your videos!! Keep doing such a great job!!

[@BrettMartindale-Plauges1988]

As a 30 year old man I doubt I could keep up with either you or Steve, especially when it comes to the level of precision you can produce while staying true to the allowable tolerances. Having a lot of fun watching this project.

[@cklinejr]

Framing! This is my favorite part of any project.

[@jimc4731]

I thrive on the finish carpentry! JIM

[@gregoryvschmidt]

Charles Kline we always had sunflower seeds while framing.

[@joshuafulton1625]

Hahaha, sounds like you haven’t framed!

[@cklinejr]

@@joshuafulton1625 Beats the hell out of fussing around with concrete or roofing!

[@joshuafulton1625]

Charles Kline very true

[@scrappypappymauldin5416]

EC, I have managed construction for 30 years and I learn something new with every video. YOU KEEP UP THE GOOD WORK!

[@kengamble8595]

End of the day, pick up tools, look over what got done, think about what needs to be done tomorrow and say THANKS to people involved........ do miss it ! 🙂 Thanks for sharing and take care. 👍

[@bpccmath251calculusiihitch4]

Spec house series on Essential Craftsman (translation: Christmas comes at least once a month. Woo-hoo!) Love the series, guys, and can't say enough about the insights you share. Thank you so much for taking the time and energy to produce it. Also, a heart-felt thanks to your families who support this effort.

[@kiwibird8441]

I like the writing on the joist to be up the right way whenever possible hehe. Great video

[@brutaldude]

Kiwi Bird I was looking for “this side up”

[@Joe___R]

Another good video. In Iowa most residential buildings are made with LVL joists or floor trusses. When I first started it was all 2x12s with x-braces just nailed straight to the rim joists, it is amazing how new materials have changed the way houses are built over the last 30 years. Before that house construction was basically unchanged for over a hundred years. I live in a house built in 1875 and it is built for the most part how I was first taught to be a house.

[@rightlanehog3151]

Let's see how well LVL and Disoriented Strand Board are holding up in 145 years. Buy using real wood thoughtfully and building sensibly-sized houses to last centuries, the forest will have plenty of time time to regenerate.

[@DiegoGonzalez-jc1hg]

So glad I found this channel.

[@westsideponchojj2603]

From 0:00 to 30:15 You can ( if you've ever been in the trades ) see the decades of experience; backed by knowledge of the IBC and a history of dimensional, with the embracing of the engineered !! Well done ! My Pop and Grandpa were also Master Carpenters and I love seeing another in action !!

[@noocnosaj]

Thank you so much for these videos. I absolutely love them. So informative. So well done. Keep up the awesome work Essential Craftsmen team!

[@stevenfoust3782]

I like listening to this man . He is very well spoken and well versed in his craft. I am a finish carpenter at heart but do everything involved with house building and repairs. I always enjoy a masters prospective as I feel everyone should aspire to do the best job possible.

[@steeveaddkins3755]

Steve Houde's a master carpenter, and as nice as the day is long! And don't forget to bring a dog-biscuit for Ace. Nice video!

[@framingbeast720]

I like watching knowledgeable people work...very therapeutic

[@nicholasvoss3502]

The best friends are the ones that just show up, grab a hammer, or shovel, or wrench and just dig in with you. I'm blessed with a few.

[@WayneSmith-yf3fg]

Yup! I had one. Showed up on my front porch on a Sunday morning (after a tree had blown down against the house the night before) with a chain saw and a gas can. Worked all day with me. Hugh became a great friend and we worked on a number of carpentry projects over the years. He was a very skilled carpenter and I learned a lot from him. Miss him now that I've moved out of state.

[@user-hd8ej8yx9p]

@@WayneSmith-yf3fg GOSH! I thought Hugh died! congrats, we should all be like Hugh... call him

[@TheFlick175]

Yeah I've got those slower friends that try to dig with a wrench too

[@zackwilliamson560]

@@TheFlick175 just spit my coffee reading this lol

[@Thomas_2615]

Yes they are

[@spookje111]

Thank you for keeping us all updated and informed. I love to see something being build and these videos are really top notch.

[@paulsautocm]

True Professionals at work, love it.

[@lukewazeka6557]

I'd like to say I love your videos. I watch them before bed every night. I just opened my own carpentry finish work stone work business. I've been at this since i was 16 and I'm now 30. I love learning old school tricks and the detail in your work. I'm the same I think ahead I plan and the work I accomplish by my self is faster than a crew of unorganized carpenters. Thanks for the videos and keep them coming. I know your busy but I'd love to pick your brain for as long as you would allow me. I can never learn enough.

[@ncooty]

I'm always impressed by your knowledge and skills, Scott. You are one heck of a craftsman.

[@kalijasin]

Old school carpenter 😊

[@js4187]

I can appreciate the effort to bring all the joists to "flat " with one another . Ive been in way too many crawl spaces and have seen the joists compressing the shim and the plywood on top of a beam or a wall like that .

[@nickroberts4586]

i wish this guy was my uncle and i could work with him and absorb all the knowledge he has

[@abrichins]

I came across this video and was blown away at the quality and volume of content in this single video. I am not sure what training the production crew has, but this was amazing. I am not sure how I can praise this enough. I can't wait to catch up on this series.

[@Bluenoser613]

Woo! Friday treat.

[@toml8142]

Block and beam is the fashion over these parts, it gives a suspended concrete floor. Massive thanks for this series

[@technosaurus3805]

Metal studs are a good alternative to OSB i-joists. Metal studs are inflamable, dimensionally perfect, include cutouts for plumbing and electric and cost the same per lineal foot regardless of length which can span up to 40ft (though 20ft is most available at the local Menards) You can still use cheaper wood studs for walls too.

[@hanskinslo326]

How deep can you get the studs? 12"?

[@technosaurus3805]

@@hanskinslo326 the best I can get off the shelf at my local Menards is 16 gauge 8"x20', but you can order heavier gauges up to 12 inches by 40 ft - sometimes larger, but usually per engineered drawings.

[@technosaurus3805]

@@treyhart6861 metal studs are actually pretty easy to work with all you need is a pair of tin snips and a razor knife plus they are about one-third the weight of wood studs. As an added benefit since you need to screw the decking down you eliminate floor squeaks (it helps that steel studs are nearly dimensionally perfect). Wood is still better for traditional walls since steel studs reduce the insulation efficiency by like 50% due to thermal bridging unless you use a non-traditional staggered stud configuration in your wall which cost more but gives superior sound and weather insulation. Other reasons include: lack of familiarity in the residential trades, cost (except for long spans), consumer preference and now supply chain uncertainty due to the "trade war".

[@jlewis1688]

All best with this build, I will be watching all the way !!

[@rightlanehog3151]

This house is not as well built as Highbury was.

[@jlewis1688]

@@rightlanehog3151 Your right there mate !! Arsenal Invincibles were a fortress

[@yogiontour]

I love the point you make about spending the morning together doing something worthwhile.

[@maleficentcop2752]

Starting to see a theme here.... If you have a full head of Gray you might be a master carpenter.... Glad Nate is good behind the camera... Sorry Nate could help my self....😜 These videos are over the top...👍👍👍👍

[@richardowen4550]

Well, this was the fascinating video, as usual , we love watching . Steve seems to be a really nice guy to work with . “ Ace “ , the supervisor , evidently knew you guys were decent workers and took a break !

[@smasica]

Wow. What a tutorial. Learned more in 30 minutes than I thought possible. Work smart, not hard and don't reinvent the wheel.

[@nobodyspecial6436]

I’d let that guy build me a house any day....... Knowledge just makes things go so much easier..... The tricks he knows cannot be found in a book it’s acquired over years of experience..... great builder,great content and a great video... I was enthralled from start to finish!!👍👍👍

[@Uncle_Buzz]

Amazing video... awesome progress, and some killer tips! Cheers, Chris.

[@turboflush]

Love the ending. Nice to have someone that can work in the same rythm.

[@bradcavanagh3092]

You certainly weren't kidding when you said getting those joists in would make it look like a whole lot of progress!

[@wornoutwrench8128]

Just can't say THANK YOU enough times for doing this series Scott. I doubt that I will ever build a house or have another house built (retired) but if for some strange reason I do, I now have a much better idea of what to do. I also have a friend like Steve. We only get to work together every several years, but when we do, it is like having a twin brother that always knows what you need, what you are doing. Makes it so we can have a visit while working since we don't have to explain things to each other about the job.

[@Slaughterk360]

“that’s as good as a factory cut “said every carpenter ever hahahhaha ✌️🤣✌️

[@jimfanning1770]

Like a bought one! Probably the most common expression I hear on site.

[@sickwitit9177]

😂 eye ball it.

[@mikehikes710]

I'm a trim and siding carpenter. Cant ever use the factory cut

[@stephenyoshida9966]

Plus no PPE when using the chain saw!!

[@micahwatson9017]

I'd be ashamed to say my cut is as good as a factory cut....especially on I joists! Lol