Roller Experiment and Analysis【ミニ四駆】Mini 4WD Tamiya Indonesia

Follow me on Instagram: ...
Watch my other videos:
Roscoe's FL System:
Tutorial: • FL System 【ミニ四駆】Tamiya...
Test run: • FL System Test Run & R...
Building MS Flexible:
Part 1: • Building MS Flexible /...
Part 2: • Building MS Flexible /...
Part 3: • Building MS Flexible /...
AT Bumper Tutorial:
• Pivot AT Bumper (Auto ...
Building AR chassis:
Part 1: • Building AR Chassis Pa...
Part 2: • Building AR Chassis Pa...
Motor Break In Tutorial:
• Motor Break In 【ミニ四駆】T...
• High Voltage Break In ...
Building MA Chassis:
Part 1: • Building MA chassis Pa...
Part2: • Building MA chassis Pa...
Part 3: • Building MA Chassis Pa...
Tires Basic Knowledge:
• Tires Basic Knowledge【...
#mini4wd #tamiyaindonesia #roscoechannel

[@1Atobe]

19mm ringless rollers are the best, they glide better on the wall and better stability due to the contact surface

[@QunudNazilah.Hobby.Balapan]

Roscoe roscoe roscoe roscoe, bila mau dtg Malaysia lagi omm

[@shaun_evox]

should try the 17mm rollers too using T2 rear stay so you can test them all out..including 13mm bearing roller set up

[@Xtoffer87]

You should have tested each setting multiple times and have gotten an average for a more accurate result. And a proper lap timer should have been used. There are factors in your test which makes it invalid, like only testing each setting once, and the manual timing of each run.

[@roscoechannel]

I've mentioned it in the video. 👌 Thanks for watching.

[@abhidharmamc5220]

Sip lah ini, menunggu rilis . hohoho

[@roscoechannel]

Mantapp. Sebarkeun gan! 👌

[@muhammadalkhadavy4951]

Bang ,, pernah buat review setting STO ,,tentang ban yah yg gak rata sama seting board ,,misalkan ngangkat satu gitu ban ya gak rata lah gitu

[@stinerivera2543]

You should test the run using an app special for tamiya. It is more accurate.

[@glennlabonete2231]

Can you make guides on how to adjust breaks depending on the tracks, just the basic ex.: clearing slopes etc.

[@roscoechannel]

Hmm, will think about it

[@glennlabonete2231]

Yes because ive been watching a lot of videos almost no one is making a guide on breaks, when i ask some experts of tamiya they always says it depends on the layout. But not everyone knows how to read a layout.

[@roscoechannel]

Yup. Well, practice is the key. 👍

[@julianpermana1882]

hmm belakang mungkin bisa dicoba pake yg 9 mm om, atau mungkin yg 17 mm. Terus mungkin yg lain udah bilang, pakai aplikasi timer buat mini 4wd. Mungkin untuk konten kedua tentang roller (jika ada), depannya saja yg diubah2, terima kasih.

[@roscoechannel]

Sip. Thx udah ntn

[@sususapijantan2K15]

The difference between 15475 and 15437 rollers apa om?

[@roscoechannel]

Nggak hapal nomor item gan

[@Acoustic4182]

Hg roller much lighter? Much smooth?

[@cakrairawan7881]

Menurut saya rooler yang bagus yang punya abel soalnya permukaan kena dinding trek kan sedikit jadi lebih cepat di tikungan

[@cakrairawan7881]

Lupa namanya gaes sorry 😅

[@kazinix]

What part number is your stabilizer?

[@hailsbdg6572]

Apakah bener kalo kita pake roller belakang 19mm depan harus 12-13mm atau belakang roller 13mm depan harus 8-9mm om? Suhu tolong jawab haha 😄🙏🏾

[@roscoechannel]

nggak wajib gan. sesuai selera saja

[@yp6055]

へー､１３の方が速かったのですね!(゜ロ゜)もしかして､ローラー 軽さですかね?よく分かりませんが(笑) あと､もし １３mmのプラローラーが出たら面白くなりそうですね(*´ω｀*)

[@roscoechannel]

はい。しかし、私は結果に影響を与え得る多くの要因があると思います。 13mmプラスチックリングローラー？それは素晴らしい！

[@cakrairawan7881]

Roscoe Channel translate ye :v

[@chthunderch5040]

１３ミリが早いのは勉強になったわ

[@roscoechannel]

はい。しかし、それはこの実験の結果です。結果に影響を与える可能性がある多くの要因もあります。

[@SisonYoutube]

Hi Roscoe, have you tried both front and rear rollers have the same size?

[@roscoechannel]

yup. I've used that kind of combination before

[@SisonYoutube]

@@roscoechannel and is it good or small in front are better? Im watching all of your runs, reviews and tutorial even my nephews (who are almost my age) are now watching your channel. I hope they also subscribed. We wanna play after covid. Thank you, Maraming Salamat Roscoe 💪🏻

[@roscoechannel]

Both setup are good and it depends on how you feel about it. Large rollers give more stability, small rollers give more cornering speed. I guess the main idea is like that. 👍

[@roscoechannel]

Wow! Thank you for watching my channel.

[@SisonYoutube]

@@roscoechannel Mini 4wd is kinda different today. I feel like a newbie, no im a newbie, but thanks to your channel catching up is within reach. And Bec. of your channel i sorted out my old tool box. Separating all non Tamiya parts lol 😁 and usable items. Long way to go. We are starting from scratch.

[@abbycafe]

Hi sir. Thank you for this video im planing to replace my 19mm plastic roller to 13mm aluminum roller too. Sir how about the front roller?? Can you do experiment like that sir?? Between 9-8mm DAR, 13-12mm DAR, 13mm aluminum roller and 19mm aluminum roller.

[@roscoechannel]

Ahahaha. This video explain the same thing that you want. The basic concept won't change. You just need to apply it to your car bro. 👍

[@abbycafe]

Ohh thank you sir il apply it to my car.

[@ryanfitrahsaputra5062]

bang itu tiang roller belakang pake apa? dan panjangnya brp ya??

[@roscoechannel]

Cap screw 30mm gan

[@EDGEbyEdeg]

Bintang book! #ehsalah

[@roscoechannel]

JT yuu

[@EDGEbyEdeg]

@@roscoechannel Hari ini? Jam 4an ya?

[@EDGEbyEdeg]

Yeee bintang menang 😁😁

[@roscoechannel]

JT?

[@EDGEbyEdeg]

Roscoe Channel iya kuy kalo jadi. Gw jam 4 baru kelar kelas, abis itu lgsung JT kalo mau wkwkwk

[@keiemtehuy6024]

what type or color of brakes did you used?

[@roscoechannel]

I forgot bro. I think I taped it with Tamiya tape

[@keiemtehuy6024]

did the rollers with rubber oring helps to clear slope sir?

[@keiemtehuy6024]

last question sir do you use calpad ? is it necessary to use calpad when putting a brake?

[@roscoechannel]

It will create more friction and probably will bring the car down faster. But the cornering will be very slow

[@roscoechannel]

What is calpad?

[@林智立]

you need install the roll at front-side to speedtest , isn't rear-side so this video isn't Reference value.

[@roscoechannel]

The goal is to minimize the variable. 👌 Thanks for watching

[@muhammadalkhadavy4951]

Bang tamiya yg di pake om tanto itu namaya iconya apa ya ?? Kaya magnum saber gitu ,, saya suka desain body ya mau cari

[@roscoechannel]

Di video mana ya? Coba komen di video yg ada mobilnya

[@AbdulAziz-ct5nc]

Bantu jwb, klo yg item yg pernah dpt BTO d graha klo ga salah body raywolf.

[@muhammadalkhadavy4951]

Sipp oke

[@mtz3808]

I think rayvolf?

[@anggiyawanyt6762]

koq bisa stabil gtu ya tamiya nya ?

[@roscoechannel]

Mantap jiwa

[@sergierzanuari2571]

musicnya enak judulnya apa bang?

[@roscoechannel]

lupa gan judulnya

[@aubreysk8192]

Penggunaan roller itu max brp sih om?

[@roscoechannel]

Sudah tidak ada batas max sekarang gan. Peraturan sudah diupdate sama Tamiya sampai ada pemberitahuan lebih lanjut.

[@aubreysk8192]

@@roscoechannel lebih dari 4 pasang gpp berati

[@roscoechannel]

@@aubreysk8192 betul sekale. Tp hati2 jd lambat kalo kebanyakan.

[@aubreysk8192]

@@roscoechannel ashiap ,makasih ya om

[@roscoechannel]

@@aubreysk8192 joz!

[@borneocamperriders2957]

detect a mistake with front roller setup... just IMO ...

[@roscoechannel]

no worries. Could you tell me the the mistake from your point of view?

[@smartwees]

Saya tebak yang merah

[@roscoechannel]

Sip, ditunggu videonya yaak

[@tracylagasca2459]

13mm is better

[@AchenkTamiyaCreatorbuilder4wd]

Saran sih bray lo kan tinggal di indo yah lebih baik bahasa indo aja.trus translatenya baha ingris.jadi alangkah lebih baiknya budayakan bahasa kita di tempat kita tinggal dan lahir.hehe maaf yah saran ajah.video lo bagus2 bgt asli.gw salah satu penggemar malahan.tapi klo yg pemula dan apalagi yg ga ngerti ingris cuma liat video doang takutnya ga mudeng..semoga lebih baik brader..btw lo ok banget

[@roscoechannel]

Ada subtitle Indonesianya kok bro. Viewers channel ini gak cuma dari Indonesia aja. Bahasa Inggris kan berlaku internasional. Viewers channel ini dari banyak negara kayak Jepang, USA, Malay, Singapore, Thai, dll. Malahan saya dapat lebih banyak apresiasi dari mereka dibandingkan negara sendiri. Biasalah khas negara tercinta... LOL. 🤣 Kalo ngikutin channel ini dari video pertama, awal mula channel ini juga seluruhnya bahasa Inggris malahan lho. Saya memutuskan selang seling dengan bahasa Indonesia karena memikirkan penonton dari negara Indonesia juga. 👌

[@AchenkTamiyaCreatorbuilder4wd]

@@roscoechannel hehe biasa di negri kita tercinta +62 emng bgtu..mkadnya video yg ini translate indonya ga ada.hehe klo yg ga paham mksdnya kasihan bray.tpi gw suka bgt video2 lo..ajibbb bray

[@roscoechannel]

Pencet tombol CC (closed caption feature) lalu pilih Indonesianya bro

[@AchenkTamiyaCreatorbuilder4wd]

@@roscoechannel makasih guru