HOW TO TUNE A CARB / CARBURETOR (step by step guided)

If you are looking "how to tune a carburetor" or "How to re jet a carburetor" I have got you covered. I will show you step by step how to rejet, tune and even clean your carb. I will also show you what each carburetor component does. This will include the carburetor jets, pilot and main, float adjustment and air/fuel screw adjustments along with the carburetor jet needle clip settings. By the end of this video you will learn how to tune your carburetor, clean your carburetor, and even know what each tiny component does. You will have a good understanding of how high altitude and performance exhaust and filters change the air fuel mixture in your carb. please comment what you have learned if any so I can have some feedback on what my next KZbin video can be about.
wide band o2 sensor kit:
www.rollingwre...

[@Wolfpack0014]

Holy sh*t this is the best video I’ve ever seen! I feel like I learned more in this video then I did in school from preK to senior year lmao!

[@RollingWrench]

Whaaat! Sweeet! Thanks for the support 🙏🏻💯

[@mauricedavis2905]

I was thinking the same thing wow this video helped me a ton. Thanks you so much wow😁

[@commander__zero2677]

@@RollingWrench got a bog with rapid throttle snap otherwise runs perfect PZ30 pumper carb. On cg250 air Any thoughts? Cam bored and coolers + exhaust are done.

[@jessicanavarro6373]

@@RollingWrench ll, pp

[@anonimous2451]

@@commander__zero2677 ...

[@chris503]

Man, I went to school for motorcycle/atv repair, and have worked in shops for several years, and nobody has ever explained carbs as well as you just did! All I can say is wow, and thank you.!

[@RollingWrench]

Heck ya!!! Thanks for the support! That makes me feel good :-) 🙏🏻

[@juliodiaz4493]

@@RollingWrench am installing a pwk carburetor myself am learning with you

[@juliodiaz4493]

I wish i lived where this man is soo i can learn this this guy now he's stuff man wow

[@chastain59]

Great video! At a point where I love working on everything myself , and this helped me so much about tuning a carburetor. So anytime you need to adjust pilot or main, you put different size jet in entirely? Needle jet you can adjust w the different rings on needle....

[@juliodiaz4493]

You was right the flow height need to be adjusted but I don't have nobody to do it ain't no good mechanic down here where I'm at they don't know nothing

[@SamThullFrottle]

I've been a mechanic for 7 years, I work on old cars, chainsaws, motorbikes, and have messed up more carburettors than I'd care to admit, to get to the point I'm at now. When I did my apprenticeship the training organisation only spent a 3 hour lesson on carburettor function, and we never worked on one. This video should be standard viewing for any mechanical course. It explains everything perfectly, and I'll be sharing it with anyone who cares to listen. Well done, and thank you!

[@RollingWrench]

Sheeesh! Thank you so much for the kind words 🙏🏻💯. I appreciate the support

[@jyellowhammer]

Agreed!

[@richardwakelin843]

An enthusiastic young expert is always much better than a classroom teacher. That was perfect. Thank you

[@RollingWrench]

Wow, thank you!

[@craigzody963]

I've been tuning carbs for years on everything from 2 stroke to brig's to VWs to racing V8s and many multi carb set ups from street strip racing and off road rigs. You have definitely explained in 30 minutes what I spent many years early on to learn trial and error as a young man. I'm the go to guy for my buddies when it comes to tuning carbs and timing and over all engine flow from air in to the exhaust out the end of the tail pipe. From now on I'm sending the guys that come to me to your video so just maybe they can learn for themselves. Teaching guys about tuning carbs is like talking French to a Spanish taught cajon You got it covered down to plain English.

[@punchmonkey4350]

2 years later and this video is still saving marriages! I was so pissed off trying to get my carb tuned and the enrire time i was trying to fix my idle by screwing up everything else. Thank you so much for putting this out there!

[@user-cl1mr8ox9k]

I like how you put marriages in there because it most definitely makes for an angry husband when he can't figure out how to adjust his damn carburetor! Haha! That was me a few days ago, now it's time to put this video to the test and adjust that carb!

[@Smodlee]

What number jets did u end up using

[@stiefbeen22]

Having been a teacher part of my life and an engine DIY-er I think this video is one of the best I have ever seen. It is extremely well planned, documented and explained part by part. Hoping you will appreciate positive comment to make it even more perfect, you could spend a bit more time on pilot jetting versus the turning of its mixture screw (with the wideband in place). As an addition you could also mention some carbs have a separate idle air-jet on the filter side of the carb. Thanks a lot for taking the time to make the video.

[@RollingWrench]

I appreciate you and your feedback

[@wefkisaleh8002]

Very educational brother thank you for this vid ! 🤟🏼

[@flatbmw4784]

Very informative and helpful, I have watched this video several times and it's helped me tune my Grom clone with a 212cc big bore race engine and Nibbi PWK 30mm carb. Your tip saying to make sure the "throttle cable has some slack and free play" saved me because my throttle cable was too tight and pilot jet was too small. Thanks for sharing your knowledge and keep up the good work!

[@davidsymalla4785]

I AGREE!!! GREAT VIDEO!!

[@SelvaKumar-ph1ov]

Excellent approach on carburettor.Thanks a lot for this video.

[@billcallahan9303]

A lot of work went into this and I hope everyone learns something and appreciates the trouble this guy went through. I'm 73, been flying two cycle ultralight aircraft since 1978 (call it 44 years) & recently Paramotors. Even I learned quite a bit from this. Many thanks to Mr. Rolling Wrench!

[@maniacse]

I am on 2stroke carbs, but lot of info here will help me with my tuning. Thanks a TON for this!

[@AmazingBlaze0]

Same

[@ZCRAIZED1]

If a person can't tune a basic carburetor after watching and reviewing this they really don't have aptitude for this and shouldn't be messing with it. Truly a comprehensive video and very well explained. You are absolutely an asset to the engine community! I have tried a few videos and I don't get more than 500 to 600 views and very few subscribers. You are absolutely doing it right with video making as well as all the valuable education you dispense. Very much appreciated. I have your wheel set, while gy6 swap kit, the fat tire kit, carburetor and engine brain. Absolutely quality parts.

[@RollingWrench]

Dude! I really really appreciate this comment. This type of feedback makes me feel significant in this world.

[@user-fy6gm5zf7o]

I am a snowmobile/ATV/PWC mechanic of many years. This video was exceptionally well done. Something to add.. You start with the pilot circuit because that jet is there from beginning to end. It continues to spray along with the other circuits. You need to get that one right first. He does exactly that, I am just pointing out why. Excellent video, well done sir!!

[@eduardwalhout1740]

Thanks for this... i was wondering how that worked. It makes sense that all the jets just add to eachother because it will need more and more fuel when you open the throttle (air) more.

[@JeremyFromScience]

This is the video on carburetors that I have always dreamt of! When you have no help or money, this video is an absolute blessing. Cheers.

[@Jacob-ln4jp]

Absolutely insane how much you covered in this video. Major props to you for covering EVERYTHING in so much detail. You killed it.

[@cranedaddy678]

Probably the best carb video I've seen yet. Kudos for going through tuning too! For some reason very few others do that.

[@brandongraham416]

I just got my first 2 stroke (banshee) and was overwhelmed by the carbs and you have simplified it tremendously. Thank you.

[@doyoumind7932]

This by far and above the best carburetor, tuning informative KZbin video in existence. This mans knowledge & expertise makes all of these other KZbin video’s on carbs look elementary. Great job man. Definitely earned a sub.

[@RollingWrench]

I appreciate you watching :-) thanks for the kind words 🙏🏻💯

[@rickyjennings8627]

definitely by far the best. hands down

[@2strokecarbtuningportingin187]

kzbin.info/aero/PLyTjGWYBzynCsVTGTCDpJIzsz3seMRYRZ

[@2strokecarbtuningportingin187]

@@rickyjennings8627 kzbin.info/aero/PLyTjGWYBzynCsVTGTCDpJIzsz3seMRYRZ

[@mysonamlo6709]

yup ....

[@ryanshout8652]

I ride dirt bikes with carbs. This is the best carb video I have seen on YT. Thanks for sharing Rolling Wrench

[@DJPrince317]

Hell Yea it is man taught me a lot

[@bryanallen9627]

Where do I hook my vent lines on my four wheeler I have same carburetor

[@BrendaEM]

This is an excellent video. Months ago, I wrote of sharing value of your experience--instead of making info-tainment, this is the kind of thing I meant. I've worked on all kinds of mechanical contrivances, but back when I had my old motorcycles, they didn't have a power jet, so I learned something too. Thank you.

[@ianseddon9347]

50 years riding and wrenching and I now understand what I do wrong - thank you! An excellent tutorial!

[@RollingWrench]

Ahh sheeesh! Thank for the support:-)

[@bensimpson9175]

Subbed!!! I'm a Motorcycle instructor in Ohio and our carbed bikes are Teedubs, a ton of old Rebels, and a few Suzuki GZ's. My personal bikes have been carbed and I'm definitely no expert, but I have limped my way through adjusting them so they run. Your video clarified and integrated lots of the information I had cobbled together in my head. Excellent!

[@AKAOmnivore]

I've been shade tree adjusting carbs as needed for years, sometimes great sometime horribly. That just explained everything. Best tutorial on this subject ever. Thank you very much!

[@David-kf4pt]

Man, I just learned how the hell my carburator works, because of this AMAZING video! Really really simple and helpful. Thank you so much man

[@keribryan3974]

I can just tell by the length of the video and your intro that it's worth watching. I've messed with carbs on 2 strokes mostly and even have my banshee with 2 synced carbs working perfectly but really appreciate these videos. It's free continued education

[@AMoney1821]

Dude 2 years later and still relevant i was scared to change my carb on my 2023 ruckus due to the jetting, have a performance exhaust, air filter delete, and pressure tube and all i needed was the performance carb now im going to change it and see how it goes thank you!!!!

[@Avensur]

This was the best explanation about jetting. And I'm not mechanic. Got some knowledge all-around from my father's. And this is valuable for me because I'm setting up my 08 KLR. Got a Big Gun exhaust and k&n filter. Getting decel pops and idle mixture screw won't give me more flow. Running 2 turns , don't hear any increments. When I reach 3 1/2 turns, the bike shutdown. Let's do it 👍

[@jrfamilylife]

Excellent video...My 2 stroke dirt bike was bogging down off the starting line, now I know why. Thanks to this video I now know what the problem is and how to fix it. Thank you !!!

[@4g63kevin]

That was probably of the most straight forward carb video ive seen. Keep up the great informational content!!

[@VoxJ]

Thanks for doing a masterclass in how to tune a carburetor. Extremely well done!

[@zachmagniss5043]

I now feel confident tuning my carb on my 2t and helping my buddy with his gy6 💯 Amazing man

[@RollingWrench]

Great to hear!

[@calvintaziar961]

This is hands down the best carb tuning video I have ever watched. So much information presented in a way that is extremely easy to understand for anybody at any skill level. I’ve been working on small engines (ATVs, snowmobiles, dirt bikes, etc.) for the better part of 9 years and learned a lot of what I know through trial and error. Never have I ever seen somebody explain carb tuning so well and make it as simple as you have. Amazing video! I learned a couple things I wish had learned when I first started.

[@frankmatthews3755]

The absolute best lesson I have ever witnessed on the topic of carburetors! Introducing all the "players" at the beginning so as to establish a vocabulary was a classic instructional technique. Taking the time to explain not only the purpose of each part but how their functions were related was superb! The cause and effect scenarios for rich and lean and how to remedy the situation for a near perfect stoichiometric ratio were exemplary! You have a gift for taking what can be a very complex topic and making it easy to understand so that others can put the information to use with successful results!!!

[@RollingWrench]

I appreciate all the kind words 🙏🏻💯. It’s comments like this that keep me feeling significant in this world.

[@robertz5958]

That was one very informative, easy to follow explanation of carbs! Thanks for taking the time to create such a great video, it is truly brilliant! Cheers!

[@thesoutherndisciple]

There are teachers, and then there are people like you. Wonderful stuff my man, you make it very easy to learn! 🙌🏼

[@elimin8or23]

Just wanted to drop you a line and let you know how much this video has changed my thinking. I have NEVER tuned a carb before… not even a clue of where to begin. I watched this video 4 or 5 times, and tore my brand new NAVI apart yesterday. I live in Denver, and feel like it was not tuned well from the dealer. I also put a intake and filter on it to remove the massive air box. I am feeling more confident and informed. I bought a “jet kit” for the intake and decided to “figure it out myself.” I feel like it is getting better, and with a little more trial and error, I will get it. I don’t think I would have even attempted without this video. Thanks for putting together such a great resource for the community. I hope to make it by your shop soon. Thanks again!!!

[@gregmckeever8041]

Great video. Watched it at breakfast, bike carb out, cleaned, jetted and running better than ever by lunch. First carb service ever. Thank you. So happy.👍👍

[@johncaisse2607]

This video made me realize that the float has a needle, when I took it apart it bounced under the tire of the mower and I had no idea to look for it until watching this. Now it's running again and I can feel like a proper home owner lol

[@rreynolds7355]

Your gold standard video should be used to educate most video producers on how to do it right

[@OzzieBloke]

Well prepared, I've been trying to teach my son about how carbs work. You just saved me hours! This explains it better than I can. Also, I always thought back firing on decel was rich but logically, it's when enough fuel gathers to pop. Makes sense. Really appreciate your effort.

[@donovanlucibello379]

This THE BEST video on tuning a carb, hands down. Bought my wide band tuner from RW, very much worth the money! Saved me hours or trial & error.

[@RollingWrench]

Thanks for the support 🙏🏻💯. I appreciate you.

[@darkwolf4962]

I stumbled onto your video, almost gave up on looking further just before I did. What amazes me is after watching your video twice, I have no questions and im not pulling my hair out. Some people like to hear themselves talk and provide little to nothing important, they should watch, listen and learn from you..i know i did. Thank you for taking the time on making your very informative, quality video. I am now a loyal subscriber. Gotta love it!

[@andrewmcconnell9846]

Mate I've been working on cars and bikes my whole life and have a lot of experience with carbies and I have to say your video is one of the most informative and very well thought out/planned videos on carbs I've ever seen! Good on ya! Cheers from down under! 🇦🇺

[@markfultz6605]

Awesome video bro. I learned so much. Went from knowing nothing to feeling very confident in tearing into my carb. Thank you for what your doing.

[@r.r.rroofing2007]

incredible how well this video explains carbs, never been so impressed with a youtube lesson before

[@RollingWrench]

Wow! Thanks dude

[@robertmonroe2880]

For dummies like me out of all the YT videos I’ve seen on how to tune a carb your explanation was the MOST thorough and understandable! I have a 2 stroke Daelim Cordi and just slapped on a power jet carb to see how it works. I had problems with what jets to use but after watching your video it runs like a champ 54mph I almost gave up on this carb but thanks to you I didn’t waste my money. Thank you very much keep up the good work 👍👍

[@RollingWrench]

Dude! I really appreciate you taking the time to write this. It means a lot

[@XxsteamerxX]

Gotta say I really appreciate the level of detail. I just cleaned my 4 carbs and took the opportunity to re-jet my 2007 Yamaha RSV because I added Monster Ovals and K&N air filters last year. Since then, the bike only ran at 1/4 choke (Mikuni plungers). When I tore them down, all the jets were clear, but the float needle gaskets seats' seals were hardened and started leaking which is why I did the job. Went up from 15 to 20 on the pilot jets and from 115 to 122.5 on main jets in the front banks and from 123 to 125 on rear banks. (Something like that. Can't remember the exact original size on the rears. I still have all the original parts though). Set pilot screw at 3 1/4 turns. Got it put back together, and she started right up with little initiall choke and ran strong at cruise speed or WOT but was getting afterfire and a little flame on the left pipe during deceleration, which I didn't mind much. Actually liked it, but didn't want it ruining anything or fouling the plugs. Fast forward to 2 days later and it wouldn't run long on cold start. Choke didn't help but actually wouldn't run at all nor start with choke. So now after watching this video, I'm thinking I may have to lean out the idle circuit as I have a sightings better understanding

[@tonyalibrando3897]

Very informative. I felt like I just took a degree course in carburetors. Great job.

[@garylavalley6173]

Well done in order and layout, this is a process that needs attention to details, and you have identified every component to follow and understand functionality my 10 year old can tune a carb thanks to your demo . .

[@justinboron2263]

Wow man that is the best tutorial and explanation I've ever seen! I knew a couple of the basics but you just brought everything to light and hit a home run! Thanks for the information.

[@TacticalMonky]

YOO thank you my guy 🙏 just rebuilt the carb on my 1990 Suzuki DR250S but I was having some trouble tuning it, found this video and got the idle and fuel screw "set". But during the test ride i was stumbling at around 5k rpm when I full throttled it, and acceleration was poor overall. So I came back and watched more of the video and your test rides, and thats when it clicked. I checked and sure enough, my old main jet was bigger then the one I got in the rebuild kit. Since the main jet didn't necessarily need replacing, and i learned about the float bowl drain giving access to it, i was able to quickly rotate it, swap the jets, put it all back and just like that the bike is running good again. Long story short, while its been running and rideable, ive been troubleshooting, working on, and riding around many issues during this restoration project for the past 3 weeks, and just to top it off its my first bike lol so thanks again for helping me with this crucial step in the project! Next up are some proper enduro tires (currently has motoX) then a Trail Tech head unit and turn signals. Best of luck everyone, and ride safe 🤘

[@roadintersection]

I have a TVS tricycle and it's too rich and very gas consuming. I tried several times to do the jetting but it helps only a little. Your video gives me complete idea of jetting. Thanks bro. Cheers from Indonesia.

[@danielsale3805]

I found this really informative and as a keen motorcycle enthusiast with hardly any knowledge on how to maintain bikes I firmly believe that I could do what your video shows. I may need to watch it a couple of times more but I definitely will be having a go. Thanks for the lesson.

[@Apexclipper]

Excellent tutorial, thanks for the work you put in to this. I rode modern sport bikes up until a few years ago, all with EFI, but recently got back in to riding with a single cylinder carbureted dual-sport. This will help me tune the carb and get the best performance possible out of this little thumper.

[@mickcaulton001]

Thank you for all the time amd effort you put in to make this video. I thought I already knew how carbs worked and how to set them up and tune them. This video let me understand how my turning of screws actually altered how the carb functioned. I came across this video as the top You Tube recommendation after watching a video by Dustin of the "Smarter Every Day" channel. He had built a working see through Carburettor and uses a high speed camera To show how the carb uses the venturi principle to mix the fuel and air for to the engine to use. All though he had the choke and throttle on his see through Carburettor his video only showed the principles and not a real life carb. But by watching his video and then yours it gives a perfect understanding of the carbs working principles and then yours shows how those principles translate onto a proper engines Carburettor, what all the screws control and how to use them to tune the carb to its full potential. Both videos I think were brilliantly made, easy to watch, well thought out and turned a fiddly job into something much easier to do. Thank you for all the time and thought you put into creating a perfect mix of a good quality video and great subject and educational content. Keep up the amazing work, you just got a like, subscription and a notification bell ring. I'm now going to look at the videos you have made previously and probably binge out on them for a good while. Thanks again.

[@4687878]

You cleared up the lean/rich diagnostic question that I've been listening to people bungle for 5 years,..in just 5 seconds,...thank you !!!

[@seanaguayo]

I come back to this video nearly twice a year. Thanks man

[@RollingWrench]

Niiiice! :-)

[@Airon0727]

This video helped me understand so much more about carbs that I hit the Like button 3 times!

[@franklinmaurer8383]

This is excellent! Thank you taking the time to explain this so thoroughly.

[@donaldlapress7061]

Very informative and educational! I had a basic understanding, but you took it to the next level! Thanks, Don

[@pro_noun9552]

Thank you so much, got a old 2003 Yamaha ttr90 that sat for 10 years in a garage, got a new carb and kept rev bombing as soon as I started it, thanks to you it runs beautifully

[@michaelmroz9378]

Best vid ever!!! Been trying to get my Virago 535 running for over 20 years now, get frustrated and try again next season. Someone buggered up the carbs. Replaced jets, top end reworked, still has issues. After watching, I now know too lean, dies with slightest turn of throttle. I'll try again. Thanks!

[@josephtaylor1654]

Duuuude! You showed up exactly when I needed you. Have a PWK that I'm working on and couldn't find a decent video for that type of carb. Thank you!!! 👍

[@dingo3190]

This video was a life saver getting my dual carbs setup. Thanks for such an informative video!

[@2-strokeking539]

Most helpful video I’ve ever watched can’t thank u enough

[@RollingWrench]

Sweet! Thanks for watching:-)

[@jghanson25]

Yes, same! So helpful

[@jasonkennedy7133]

I loved this video!!! It makes it so easy to understand and when you have that one customer that has got it all backwards ,this video can stop all the what if questions before they get started... Point Blank Period!!

[@2wat205]

Thankyou, I’m in the process of rebuilding the carbs on my 4 cylinder Triumph, I now feel like I have some understanding of how they work.

[@JonFromSoCal]

I don’t even own a ruckus but this seemed liked really useful info.

[@RollingWrench]

I appreciate you dude

[@jeanicezinho]

muito bom meu amigo, meus parabéns pela aula e obrigado por compartilhar o seu conhecimento!

[@joseelbarbero3336]

Dude, I think I just got my masters on carbs.

[@RollingWrench]

Lol yesss!

[@Ethan.s..]

Next up will be learning Nitrous Oxide haha. I bought a book on it years ago, after reading it I didn’t add NOS to my car.

[@mr.equity1120]

Thank you. With this video I was able to tinker with my 80CC four stroke bike engine. It was giving me 15 mph and the motor was bogging. We tuned the carb, got a better exhaust and changed the sprocket for a bigger one more top speed but sacrificed acceleration. Now it easily reaches up to 20mph.

[@RollingWrench]

Great job!

[@Miniorpernik]

Thanks...Tunning 150 cc two stroke . After watching Ur first video I have come up with exactly what u did here ..115 main .needle down a bit ...and I am gonna go down on the pilot at it bogs bad...Great videos .

[@Eyeless]

thanks for the video i thought the whole carb worked together when running also how would you do this on motorcycles with 2+ cylinders

[@tyegunn]

I learned…..about a semester of community college mechanics

[@RollingWrench]

LOL sweet! That’s what I like to hear

[@therealUrbiking]

by far the best explanation on how carbs work and how you tune them all in one video you did a fantastic job at explaining how and why a specific change effects the rpm and mixture

[@spieftech7958]

That was hands down the best general tuning video for smaller carbs. Very good job sir.

[@jeremyelford7926]

Excellent video, man...I learned more about carburetion in the 35 minutes of this video than I had in the previous 48 years of my life...well done

[@davidenright8641]

53 years for me, including 30 of that in a maintenance capacity, you taught me more in 30+ MINUTES! Thanks Brother!

[@michaelbblunk]

Was having trouble jetting my bike. Got it sorted because of your excellent video. Thank you for what you do.

[@RollingWrench]

Nice dude! I appreciate the support 🙏🏻🙏🏻💯💯💯

[@krcjimenez1425]

I've watched a lot of tutorials about tuning carb, and by far this was the best among the rest. Best explanation ever made. Now I can do a lot better in working carburetor.

[@bobnordin291]

I am so happy you broke this down. I bought a Yamaha Virago 750 two years ago and did some cleanup including rebuilding the carbs and I know it can run better. Now I know just what to do. Thank you!

[@bobnordin291]

The front cylinder exhaust is almost non existing at idle but normal at cruising. Then when I get up to 65mph I am losing a cylinder which comes back when I slow slightly. This is a result of bad tuning, correct?

[@banditryder4696]

Thanks for making it easy. I will be getting into my carb soon. 02 crf250r. In NM near Co. Took my bike from Ca to Nm. Guya at a shop couldnt even get my carb rite. But now i have this video for rererence. And will get it rite mself. Shes running rich. Will probably just need to do what you did lol. Thanks man ✌️

[@glennhertel1165]

I bought a Rolling Wrench Carburetor 49cc 125 carb for my BBK build and it works perfect very happy with it best 65$ I've spent.

[@glennhertel1165]

Put a carb I bought from you on my Tao Tao 50cc it was hard to start unplugged the auto choke it fixed the problem Thanks for the Learning Channel.

[@nelisamarwede1296]

To be honest, for a beginner this is something to always come back and reference from. The skill will set in over time but this is really informative. I also learnt to be careful with gas on that "o" ring when you opening your carb. I also learnt that backfiring is not "rich" but "lean"... lol that really helps to know.

[@drivetilldeathilovefullthr9078]

This video can turn a newbie into pro (with some hands-on experience) The best carb guide video ever

[@tudor.5143]

No comments. The best video I have ever seen! Sooo much too learn and sooo goood explanation.

[@brucegregory7807]

My wife's ruckus would not start when cold. Took forever. I found a previous video about adjusting the valves. Did so. Starts! So, I subscribed. I will apply what I learned in this vid to tune the carburetor OR look into an injection system.

[@confoundb4]

I just purchased a used a 3206 yerf dog. New carb and wiring just came in the mail. Needed this video, I knew the information but needed a refresher. Great video 👍

[@RollingWrench]

Niiicw!

[@mattybobattyblunt]

Guess this video has been up for a while now, but glad I found it. My stock crf125 carb doesn't have all of the adjustment screws in the video but this will still help me wrap my head around what is going on with air and fuel in there. Thanks!

[@CFMRocksFishing-Music]

Im currently Working on a yamaha 1998 jog restore. This was very useful for my recent success in getting the bike backup and running. Thanks

[@ACommenterOnYouTube]

This video is def the most detailed video about carburetor tunning ever ... And i would have NEVER thought to slap a wideband on a motorcycle even though it works the same as a car 🤯 ...

[@dans_Learning_Curve]

A friend shared this on Facebook. Well done 👍! I'm 58 and have been messing with engines probably from around 7-10 years old. I've blindly "adjusted" carbs, and kinda gotten things to run okay. New Sub.

[@junzab1341]

You nailed it, all in one technical explanation as connected to the actual site condition. Double Thumb's Up. This guy , he knows what he is talking about with solid output and really skilled unlike others that are pretenders .

[@Psychx_]

Thank you very much! With the guidance provided from this video, I could dial in the carb on my Daelim VL 125 perfectly after cleaning, rebuilding and rejetting it.

[@Mike-lb7tg]

I've KZbin abit of how to fix Small engine stuff, I think this is the most helpful video I've ever seen

[@RollingWrench]

Ahh heck ya!!!

[@feetfats1]

I came here for a refresher and was completely blown away. Fantastic job on this video.

[@RollingWrench]

Thank you dude

[@RalphLeo]

After that video, I am definitely a new subscriber you couldn’t have made it more simple for something I’ve had no idea how to adjust

[@RollingWrench]

Ahh niiice! Thanks for the kind words :-)

[@camcarb3]

Spinning backflip accomplished--subbed🤟

[@williamkelly7798]

I was looking into adjusting my fuel, because my vehicle uses too much fuel, but it also comes in with the aftermarket pipes and race carb filters. But it looks like I may have to change my stock pipes before doing so. Your video helped me understand more of what I need to do, however I will need to wait for some parts to go along with it.... Not only 1 cylinder, but this is for a triple. I assume it's the same, but I'll be sure to check the correct factory settings for the particular engine. Thank you, sir. I'll recommend your video to my buddies on carb adjustments for sure!

[@HandF0rged]

This is such a thorough video. I was clueless about how to dial in my cb750’s carbs. This helped soooooooo much!!!

[@RollingWrench]

Niiice! Thanks dude

[@matthewmcmahon6281]

Best tutorial I’ve seen on KZbin always been confused by carbs this video has changed that liked and subscribed 👍👍

[@RollingWrench]

Ahh nice ! Thank you

[@eljaibas16]

The best video I've seen on carb tuning, the wideband demonstration was the cherry on top.