Rollsizer with $10 eBay digital counter

This is my commercial Rollsizer that I have fitted with a cheap $10 eBay proximity sensor type digital counter. The mount that comes with the device is easily bent into position after being mounted to the bolt that holds the rubber bumper to the body of the rollsizer. The included magnet is simply taped into place on the feed arm, but I will be using epoxy for final attachment. I am only running 3 pins which allows for 3050 cases per hour, and my Dillon 650 case feeder is usually able to keep up with demand.

[@danm8904]

brass getting under the box flap, arggg .

[@davidhealdjr.513]

Now that I have a decent house with a garage, I should get some reloading gear. After I get my mill.

[@rollsizer5623]

David, i make the rollsizers, if you have any questions, please ask or email me at [e-mail]

[@marcosnunez9955]

acuto das 1000 de 9

[@tele1311]

This is not actually counting how many pieces of brass actually went through the machine.... It's only counting how many times the feed lever was tripped. When the feeder stops feeding brass this counter will still continue counting. Good try but not practical.

[@chevrofreak]

If I am watching it and reset it as the first piece comes through, then catch the wire that activates the feed arm as the last case gets fed then it gives very accurate results. It beats counting in my head.

[@bolkanwertugov3343]

Ич то тут такого фантастического? Иботень полная. Это вам не как не поможет