Try clamping it to the 2x4 of your bench frame (with the clamp part horizontal).
@CKKnifeandTool5 жыл бұрын
I have a small shelf under the work bench that seems to work out great. Perfect height sitting on the stool and standing. Might have to notch the 2x4 though. Between that and the 1.25" plywood top it's too thick. Thanks for watching and the tip.
@bazlur-Vancouver4 жыл бұрын
I thought the same before your proposal.
@jcknives41625 жыл бұрын
I might have to buy one. Love it
@jcknives41625 жыл бұрын
NO... DONT MODIFY THE CLAMP. MODIFY THE BENCH RAIL BOTTOM.
@CKKnifeandTool5 жыл бұрын
It actually works great on a small plywood shelf under the one portion of the work bench. I can use it that why while seated or standing. This thing is pretty slick!
@stoneblue17954 жыл бұрын
For those that want to know, as this guy can't recall what size he bought, it's the LARGE one shown, called the "Gulliver" that the Russian fellow sells.
@terry23463 жыл бұрын
Looks like a very easy build to me. Would not need plans to do it. Just look at it a few times and go from there. Not sure I would make it out of plywood though. Would be prettier from actual wood! :)
@user-wp4st7om4y4 жыл бұрын
Молодец,позитивный дядька!!!
@jcknives41625 жыл бұрын
Bought one. thanks!!
@andreatthatsme5 жыл бұрын
The one in South Korea is the exact same. I am a leather crafter. I bought the portable one from S. Korea because i wasnt sure about the russian version. But they are the same... I like the small one, but mine didn't come with the small wood turn for the bolt. He only makes them for his large clamps. Its tiny to fit in my purse/bag so i can take it anywhere. You may want to try a small one to take on the go so you dont have to haul your big one😉 I will probably get the bigger one from romanov as his s/h and clamp is slightly less.
@bazlur-Vancouver4 жыл бұрын
what the quality Romanov with a Korean one?. Korean one is expensive and he did not reply I wrote him/her twice. I have simple 2 ponies but like to buy either romanov or Korean one(dream factory)
@CKKnifeandTool4 жыл бұрын
Andrea Tomonaga ... When I was looking, only two folks popped up and yes, one was Korean based and then this Russian based company. The Korean one was listed out of stock but I also had a friend using the Russian branded one so those two reasons are why I have this one. The small didn’t concern me because I have to plans to stitch and travel.
@jenkins19793 жыл бұрын
I am having trouble ordering one of these Gulliver stitching clamps.Can you tell me what is the size table clamp? Will it fit a 4 inch table.
@donaldstearne4465 жыл бұрын
if your only making a doz sheaths a year put a notch under your bench where your happy to do your sewing .
@55418und9 ай бұрын
What did you pay for that?
@CKKnifeandTool9 ай бұрын
Oh boy…. This videos a bit old. I think I paid around $250 shipped. That was then and things have changed quite a bit but I think I was around $250
@LeatherHeadReviews4 жыл бұрын
Does Tanner at carriage Leather have a KZbin channel or Instagram page?
@CKKnifeandTool4 жыл бұрын
Leather Head Reviews ... You can find him more active on Instagram
@meeliskr2 жыл бұрын
Its not russia, its Ukraina :), and he used baltic birch plywood, very good stuff
@CKKnifeandTool2 жыл бұрын
Oh, okay. Thanks! And yes, I still have it and use it. Great addition to the shop.
@meeliskr2 жыл бұрын
@@CKKnifeandTool I just order it for my shop too :)
@ThisTall5 жыл бұрын
The guys prices are pretty fare. $185 for a large one and a small one.
@8888Riley4 жыл бұрын
Nice pony!.... which size is the one you have there?
@CKKnifeandTool4 жыл бұрын
Riley Wyatt ... If I recall, they had a small and large. This was the large. Maybe there was three...? 🤔 Then this would be the medium size. You’d have to check but it was not the small or travel size one.
@8888Riley4 жыл бұрын
@@CKKnifeandTool 🤔😳
@bazlur-Vancouver4 жыл бұрын
How much weight this one?. Korean guys shipping 35 $ Canadian, but I wrote to him to send me with ePacket, he doesn't reply at all. Korean guy is a woman. I bought it from RM leather(dream factory)
@Marian1983.2D3 жыл бұрын
That's Baltic Birch plywood, not beech.
@andreatthatsme5 жыл бұрын
Q: if i sent the size of my bolt, do you think you can make me a small wood piece i can use to cover the bolt that turns the large screw upwards? Like yours but not as big? I don't do woodwork at all and it will help having one for my hand strength.
@CKKnifeandTool5 жыл бұрын
Andrea Tomonaga .... That’s a tough one. I’m not sure if the bolt goes through the wood knob or if the wood knob is just epoxied over the top of the bolt. As for making you one, I’m sure I could do it I just don’t have the time to get it done. That is, get a project like that completed in the next 3-4 months.
@petergallagher56434 жыл бұрын
Use a bottle lid to cover the bolt😊
@alzathoth4 жыл бұрын
where can I get plans for free?
@CKKnifeandTool4 жыл бұрын
alzathoth ... internet
@allanpennington4 жыл бұрын
Im intersected to know if you have had the jaw adjustment threaded bolt hole wear out. I understand from another reviewer that the thread is cut into the wood. That is there is no insert for a metal nut. Because the angle changes as the jaw is closed there is pressure on the bolt and thus the threaded hole since it stays in the same plane. The knurled hand wheel remains vertical and the bolt is at right angles to it, but the contact face of the jaw where the hand wheel meets can't stay flush throughout its full movement. This guy sort of mentions this problem with the Dream Factory one or he might mean the Romanov one or both, he is a little unclear. So I thought I would ask you as you have the rusky model. kzbin.info/www/bejne/jnTIl52ko7WSp9E
@CKKnifeandTool4 жыл бұрын
Mine has been working just fine
@davidknight1144 жыл бұрын
Cut a small notch out the work bench! Don't deface a fine product like that!!!
@CKKnifeandTool4 жыл бұрын
David Knight ... Ha! Don’t fret David I didn’t!!! 😉
@davidknight1144 жыл бұрын
@@CKKnifeandTool wow you had me worried. I'm looking to get my first pony , I like that design. Oh good video. Keep them coming.
@lynnlard55314 жыл бұрын
After 7 minutes of a 14+ minute video I saw virtually NO useful or relevant content! Amazing that so many video makers seem to think just their voice and presence is somehow worth watching.
@CKKnifeandTool4 жыл бұрын
Lynn Lard ... Perhaps it’s just that many of us don’t have the attention span of a 6 yr old? 🤔 But hey! Thanks for stopping over and thanks for helping the algorithm! 👏🏻