In this video Ronald Kanne turns 2 platters. One using vacuum and one using a normal chuck. Turning a platter/plate/dish is fast and easy.
Пікірлер: 98
@alanneel27494 күн бұрын
Nice plates! Where can you get that suck chuck? Really like some of the camera work getting views that help understand the tool positions …
@frankvanderwal45713 жыл бұрын
Hi Ronald, Lies. Congrats with your 1000+ subscribers! Well done. Again a nice video. Not only the making of the platters (with and without the SuckChuck) was very interesting, also the footage, Lies. Very nice camera work. Great tip to do the push cut for a nicer finish. Let me also give it a go. Btw, I’ve ran out of mother in laws but the last project, was very well received by other family mebers! Cheers, __Frank
@ronaldkanne3 жыл бұрын
Good to hear Frank!
@pigeonmanof1803 жыл бұрын
You’re the first right-handed turner I have seen run the lathe clockwise. Nice. I like your videos. I learn a lot from you. Great control, nice design and proportions on your pieces, high quality all around. Please keep posting. Thanks.
@ronaldkanne3 жыл бұрын
Thank you Adam! btw... I do the outside of a bowl left-handed... :-)
@robohippy2 жыл бұрын
It still surprises me that people have sliding headstock lathes and they don't use the slide so you are on a short bed lathe rather than on a long bed lathe. Maybe because that is the reason I bought my first sliding headstock lathe.....
@RickTurnsWoodturning3 жыл бұрын
Nice plates - and the disembodied voice in the background is cool too!
@ronaldkanne3 жыл бұрын
Thank you Rick!
@teamwild_UK2 жыл бұрын
I just found your channel whilst looking for some inspiration. Great project and now I’m off to make my own Cheers, Ben
@ronaldkanne2 жыл бұрын
And? Good result?
@hanslubbers55283 жыл бұрын
Zoals we inmiddels gewend zijn van Lies en jou, leuke instructie film. Wacht al op de volgende.
@landmanlimited5 ай бұрын
Great info. Please do wear a mask though even with the dust extractor when you sand.
@mickaelouvray3 жыл бұрын
Bonjour J'aurais voulu savoir où avez-vous acheté votre mandrin à air avec le centreur. En attente d'une réponse merci
@ronaldkanne3 жыл бұрын
Hi Mickael, it is homemade...
@fern61144 ай бұрын
New subscriber, relax video… gudd gemaach salü vun Lëtzebuerg 😊🇱🇺🍺
@ecocentrichomestead67832 жыл бұрын
Platters is one thing I'm thinking of making to see if they sell. I having been woodworking in 3 years because I had no way to get the proper wood stock. This past winter I figured out how to get the right stock. Now, back to woodworking!
@nickorgan58833 жыл бұрын
Great demo, I use a face plate with thick neoprene on it, which works well. You get a great finish off the tool, what grinds do you use? And what sharpening system? Keep up the great work, I'm sure it wont be long before you reach 10,000 subscribers, you come across as a honest, caring sort of guy.
@mirco.04143 жыл бұрын
Great video! Thank you so much for sharing. There is a lot newbies like me can pick up.
@garthkeck20032 жыл бұрын
You make it look so easy. I feel like I am in school every time I watch one of your videos. Thanks for sharing
@ronaldkanne2 жыл бұрын
Haha! Thank you Garth. I wouldn't mind feeling like that. I had a great time at school! 🙂
@GeraldJensen3 жыл бұрын
I like the 'suck chuck'! Very good video ... Thank you!
@Leefywood3 жыл бұрын
Another great job. Thanks again for sharing your talents. Keep um coming.
@MichalisCholevas3 жыл бұрын
Keep them videos coming Ronald! Great video as always and a cool chuck!
@ronaldkanne3 жыл бұрын
I will Michalis! Hope to see you soon!
@fiattempra13 жыл бұрын
En....weer wat geleerd vandaag. Dank Ronald.
@ronaldkanne3 жыл бұрын
graag gedaan!
@ConcreteLand2 жыл бұрын
Mr. Kanne, haven’t seen anything new in a while. I hope everything is going well for my favourite KZbin wood turner. Greetings and best wishes from Canada 🇨🇦.
@ronaldkanne2 жыл бұрын
Hi Concreteland, everything is well on this side. Thanks for asking. We haven't done much videoing due to to loads of commisioned work. But soon there will be a new video... a winecooler...😊
@eriklarsen61313 жыл бұрын
I like your videos, but please put links to the products you are showing, like the suckchuck and the pepper drill.
@ronaldkanne3 жыл бұрын
I put in a few now Erik. But this vacuum chuck was specially made for me, I don't think it is commercially available. But if somebody knows...
@JamesCouch777 Жыл бұрын
Sounds like your #1 fan is also good with the camera 😉 great job on the piece 👌
@ronaldkanne Жыл бұрын
Thank you James! (And yes, she is a pro camgirl...)
@gregmcateer8752 Жыл бұрын
Great video, thanks both of you, for sharing your skills and enthusiasm 👍 Oh, and where in the UK can we buy your crush grind drill?
@ronaldkanne Жыл бұрын
I think axminster will have the same sort of drill made by Woodcut... search for mill drill.
@gregmcateer8752 Жыл бұрын
@@ronaldkanne many thanks
@bobh561610 ай бұрын
I love your suck-chuck - very useful! Finding quartersawn blanks is quite difficult, unless you have your own supplier.
@brucecraig49549 ай бұрын
I would buy a suck chuck in a second.
@TheTinyWorkshop3 жыл бұрын
Dank voor deze uitleg. Met name de uitleg over richting van de nerf. Ik ga morgen gelijk kijken bij de stukken walnoot die ik heb liggen of ze geschikt zijn . Frank.
@ronaldkanne3 жыл бұрын
Dikke bomen heb je nodig Frank. :-)
@TheTinyWorkshop3 жыл бұрын
@@ronaldkanne "Van dikke boom zaagt men planken" is het toch 😁
@sandyrolandcloutier15127 ай бұрын
Simply amazing. I'm now inspired to try making some platters. Thank you so much!
@basbarthen9 ай бұрын
Smart; using a fakir plate instead of a face plate...☺
@ronaldkanne9 ай бұрын
Fakir plate...😄
@edpeperkamp64093 жыл бұрын
Inspirational....again. Thanks for sharing.
@charlesgreen5803 жыл бұрын
very nice video, i appreciate the way that you present your projects. I like the way you use the reverse direction on lathe. I also would appreciate links to suck chuck and drill. thank you charles green
@ronaldkanne3 жыл бұрын
@@charlesgreen580 I have put in a few links now Charles. But unfortunately the vacuum chuck was a "one time made"... I understand that Hager makes one... shop.hager-drechseln.de/epages/Hager_Michael43959566.sf/de_DE/?ObjectPath=/Shops/Hager_Michael43959566/Products/90206
@louisboucher4839 Жыл бұрын
Hi Ronald I am a woodturning instructor in Canada and really enjoy your entertaining videos. where can I get a suckchuck ? keep turning
@henkderijk2393 жыл бұрын
Eet smakelijk 😋 leuke film
@ronaldkanne3 жыл бұрын
Dank je wel Henk!
@ilawoodwyk1417 Жыл бұрын
I enjoy your demos but get frustrated when you use tool you had made or had made for you. That means I cannot replicate what you make.. Your salt shaker gave me a great idea how to make my own version. Thank you. Why is the woman always interrupting you?
@jodyjohnson3146 Жыл бұрын
This is the first of your videos I have watched. Very nice work. Your Video Supervisor films in interesting angles.
@fallentreewoodcrafts Жыл бұрын
I love turning Ash. Here in the US, many of our Ash stands have been decimated by the Emeral Ash Borror. Such a tragedy. We still have two healthy Ash trees in our yard. The Ash that grows around here is called Green Ash. The wood is bit darker than what you are working with, but has the same straight parallel grain when quarter sawn. I also love ash crotch wood. Your instruction and demonstration on platter turning was very informative and helpful, thanks.
@chevrex Жыл бұрын
Hi Ronald. (I’ve made purchases from your shop. Nice to put a face to a name.) Nice to see the two different techniques. That center pin is a clever addition to a vacuum chuck. When I was taking a course in Maine last year, we a sort of guide stick to help center platters, but there was no real control - only patience and a steady hand. And Thanks for the tip on reversing direction for that climb cut. Clever. Cheers from Paris.
@glencrandall70513 ай бұрын
Very well done.🙂🙂
@griinder2 жыл бұрын
do you have any info on the "suck chuck" ? looks like a cool thing
@ronaldkanne Жыл бұрын
Very useful it is yes. We made it ourselves. I know Hager in Germany also makes one. But don't google suckchuck to find it...🙂
@nikenike25302 жыл бұрын
Vederti tornire per me e come vedere una persona che fa surf.....gran bel movimento complimenti
@northernhumidor5615 Жыл бұрын
Ash is such a lovely wood to turn , we here in northern Ontario, Canada have a dark ash called black ash , or swamp ash that is similar. One of my favourites to turn .
@zenletter6 ай бұрын
What vacuum (suck) chuck is that? Never saw one like it. Like it.
@ronaldkanne6 ай бұрын
It is home made.....
@zenletter6 ай бұрын
@@ronaldkanne very nice. I need to redo my flat chuck. The spring pin is genius.
@stuartbruton486 ай бұрын
As ever, a great demo. It gives us newbies something to aim for. 👍
@christopherharrison67246 ай бұрын
What happened to the whole in the middle ?
@ronaldkanne6 ай бұрын
Hi Christopher, i don't get the question i think... do you mean the hole or the whole? On what side of the plate?
@0770dc2 жыл бұрын
Very refreshing style of video bud 👌
@ronaldkanne2 жыл бұрын
Thank you!
@daveandcindyamos55372 жыл бұрын
Great videos. Just found your channel. What make and model of sanding drill ate you using. Great job.
@ronaldkanne Жыл бұрын
Hi Dave and Cubdy, That is a Makita DA3011F. (Sorry for the slow answer...)
@html9155 Жыл бұрын
Excellent work. Thank you.
@buickkootje3 жыл бұрын
Leuk weer!
@foreverturningpeterkipfer5468 Жыл бұрын
I just recently found your channel and found it to be very informative. When doing your platers, how do you determine the size of the rim on the front and the foot on the bottom?
@ronaldkanne Жыл бұрын
Hi Peter, unless i am given a drawing i don't measure or determine anything... a platter needs a steay wide foot, and the rim i do by eye...just what i like...
@keesklerk32443 жыл бұрын
Hallo Ronald, duidelijke video! Hoe komt het dat ik geen vacuum-pomp hoor? Heb jij daar iets slims voor bedacht?
@ronaldkanne3 жыл бұрын
Hoi Kees, dank. Waarom je de pomp niet hoort is denk ik omdat de pomp heel weinig geluid maakt... :-) Het is een vacuüm pomp van Gast. Ik zou 'm eens op de site moeten zetten eigenlijk... :-)
@johnlastname2397 Жыл бұрын
I like the commentary from your videographer
@ronaldkanne Жыл бұрын
I will pass it on to Lies...(that's her name)
@longdriver2 Жыл бұрын
Nice job! What brand is your sander?
@ronaldkanne Жыл бұрын
Well, actually it is a drill. A Makita angled drill...
@longdriver2 Жыл бұрын
@@ronaldkanne A Makita corded right angle drill?
@ronaldkanne Жыл бұрын
@@longdriver2 it is a makita DA3011F to be precisely...
@longdriver2 Жыл бұрын
@@ronaldkanne Thanks.
@patminister4414 Жыл бұрын
Yet another inspirational vid and yet more questions. Read all the comments to see if the answer is there but no not this time. On your push cut you change direction on your lathe but if someone's lathe only goes one way does that mean the Turner needs to change sides to achieve a push cut or would you recommend not doing this as it could stop access to the stop button. PS love how you explain how to do if you don't have all the new or latest gizmos.
@ronaldkanne Жыл бұрын
Pat, there is nothing wrong with standing on 'the other' side of the lathe... i used to do it a lot while hollowing...
@patminister4414 Жыл бұрын
@@ronaldkanne thank you
@curtisbolyard8192 жыл бұрын
Who’s voice is in the background ?
@ronaldkanne2 жыл бұрын
Her name is Lies... she is the camgirl...
@matslundmark1497 Жыл бұрын
Nice woork! Merry Christmas 😇
@ronaldkanne Жыл бұрын
Thank you Mats! You too!
@cjphillips66483 жыл бұрын
Where can I get a pepper grinder tool like yours?
@ronaldkanne3 жыл бұрын
Hi CJ. The drill you can find here: dehoutdraaierij.nl/en/shop/search-by-brand/crushgrind-en/mini-crushgrind-drill/