I made this ash door for a roof deck. I haven't decided on a door handle yet. Thanks for watching -Toth Store: www.woodbytoth... www.woodbytoth.com / woodbytoth / tothtoth
Пікірлер: 75
@denniscarreno588211 ай бұрын
A true master in woodworking……well done! Greetings from down under Australia….stay safe!
@TheRealElDiablo11 ай бұрын
Bro, you’re a BEAST of a Woodworker! That wood kept pinching your table saw blade. That used to drive me nuts
@vernhart11 ай бұрын
That’s the most challenging glue up I have seen… ever? kudos!
@WoodByToth11 ай бұрын
It was fairly hard. I spent a lot of time aligning things to help it go smoothly
@s2pointoh11 ай бұрын
Awesome. Love your work. That table saw is a champ hanging in there without a riving knife.
@kevinnathanson687611 ай бұрын
RIVING KNIFE!!! Come on, dude.... All it takes is one. Nice work as always.
@itwasrightthere11 ай бұрын
I winced at 2:33 I had to stop watching.
@williamellis899311 ай бұрын
That's really nice, Kyle. It looks like you used every domino in the free world. I hope they make more. Todd looked like he was having fun. Bill
@youtukang11 ай бұрын
😊❤❤
@TheWakes12002211 ай бұрын
Only 248 dominoes 😂
@williamellis899311 ай бұрын
@@TheWakes120022 Did you really take the time to count them?
@TheWakes12002211 ай бұрын
@williamellis8993 it was more multiplication than adding, but yeah pretty much lol. My OCD brain was already adding them before I had time to think about it lol.
@williamellis899311 ай бұрын
@@TheWakes120022 lol
@youtukang11 ай бұрын
Thankyou for sharing
@philsheldon273711 ай бұрын
Patience of a Saint! Brilliant accurate work
@WoodByToth11 ай бұрын
Thanks!
@Typersx111 ай бұрын
Why not do half laps joints? Either way looks amazing
@WoodByToth11 ай бұрын
I thought about it. Was a lot more work and I didnt have enough space in the shop to pull it off well
@forbol11 ай бұрын
I was wondering the same thing. But then I thought he probably wanted solid vertical lines on both sides. Where as half laps would have had solid horizontals on one of the sides.
@whitewolf875811 ай бұрын
Very cool project! Love the door design too!
@WoodByToth11 ай бұрын
Thank you! Cheers!
@DIYTyler11 ай бұрын
Good stuff man! Stressful glue up👍🏻
@mdbohica11 ай бұрын
WHEW, did Festool really see you coming! :D Looks great!!
@WestinBrousseau9 күн бұрын
The best in the biz
@sapelesteve11 ай бұрын
Fantastic build Kyle & it was good seeing the pooch at the end of the video! 👍👍🐶🐶
@WoodByToth11 ай бұрын
Thanks. I always make sure Todd makes the cut
@robzilla216511 ай бұрын
I like it. Its different, unique, and well built. Thanks for posting
@WoodByToth11 ай бұрын
Glad you like it!
@williamkeown825211 ай бұрын
After drilling 348 dominoes for this door I bet you don't want to see anymore for a while. Nice job on the door
@ChetKloss11 ай бұрын
Once again, superior work.
@MUZAFFARNAZIYAАй бұрын
Very nice work sir❤
@barthanes111 ай бұрын
Ash is my favorite grain pattern.
@danieldurkton294211 ай бұрын
Very Cool!!! Looks great nice and tight!!! Have a great weekend..🍻😎
@branchandfoundry56011 ай бұрын
Nobody's getting through when they storm the gates--that sucker is a beast!
@moycakes11 ай бұрын
Good lookin' door, but where did your riving knife go?
@WoodByToth11 ай бұрын
Its bent 😢
@SawdustnScience11 ай бұрын
You weild that domino like you were born with it. I have struggled to use it efficiently. Any work flow or aha moments that you would suggest?
@Estwing2211 ай бұрын
At 2:35 you reach both hands past the blade and grabbed your workpiece by the endgrain and pulled it backwards through the blade towards yourself. Why?
@geop550511 ай бұрын
I was also wondering about this as well. I rewound three times to make sure that's what I had seen, but I figure he knows what he's doing. Still was unnerved to watch it though.
@841tl11 ай бұрын
There was tension released in the wood causing it to pinch down on the blade. You can hear the motor bogging down. He turns the saw off and pulls the wood back through the blade. It can be very tight and require two hands to remove it.
@paulkolodner244511 ай бұрын
@@841tl When I first saw it, I was shocked, but later review showed that he quickly shut off the saw before sticking his hands in there.
@MrThumbtack11 ай бұрын
This is such an amazing piece, and so much work that I was initially like ‘why aren’t those dominoes in the middle of each piece!? He’s being so meticulous!’ Then I realized he did that on purpose, so he wouldn’t glue the grain matched cross pieces in upside down. 😂
@WoodByToth11 ай бұрын
🙃
@ping17011 ай бұрын
Wow, that a whole lot of dominos !
@strokerace546811 ай бұрын
What a beast. Nice
@ddutton011 ай бұрын
Stay Dusty!
@plumbum655811 ай бұрын
Lol that’s a lot of dominoes 👍
@michaeldemiranda815711 ай бұрын
Think you needed a few more dominoes 🤣🤣
@davidn794511 ай бұрын
that is one stressful glue-up!
@theofarmmanager26711 ай бұрын
Very nice work. If I were to make the same door, I would use exactly the same techniques - although I think the dust extraction on my table saw might be better. I recently made a pair of “similar” grid doors for the entrance hall to our house. As all of our house is trimmed in European oak, the doors were the same. My stiles and rails were roughly 4” wide. As I wanted individual panes of glass - each one a different colour - I came up with a solution to fit my design. I used 2 widths of oak - one roughly 4.75” wide and the other 4” wide and each half the thickness of my final doors. I effectively made 2 doors for each side (therefore 4 in total) and glued them on top of each other. As I made one door with the rails full width and the matching inside door with stiles full length, when I laminated them together, they made the joints (dominoes) incredibly strong. The other reason, apart from strength, to do it this way is that I made ready made rebates for the glass to sit in. 1/4” thick glass hand painted by my wife was secured by strips. Not better, not worse but a different method for a slightly different aesthetic. As I’m the UK, I use metric for all woodworking but I’m unfortunately old enough to have been educated in imperial and so switch from one to the other without rationale.
@michaelturner24711 ай бұрын
really great piece. beautiful light through it. what did you use for finish?
@purpleidea11 ай бұрын
Yikes dude, that thing has more dominoes than hardwood in it!
@WoodByToth11 ай бұрын
😂
@thomash701611 ай бұрын
Love this, I’m going to tackle something similar. Did you route out both sections at the end for both of the glass plastic to fit in place ? As in route out the whole area ?
@WoodByToth11 ай бұрын
Yes I routed out the whole back about 9/16 deep for the 1/4 inch glass to fit. Then I routed a groove for the wood trim piece to go. I would have thicknesses the wood before glue up instead of routing the entire back out but I was not sure about the size of the glass and how many glass panel’s there would be. So I did it at the end
@wernerpfeifer11 ай бұрын
Grandios!
@quirkydad608311 ай бұрын
Woah!!!
@gkkent11 ай бұрын
The door is gorgeous!! Did you wear rubber gloves when you were installing the glass to keep from getting fingerprints on it?
@WoodByToth11 ай бұрын
Thanks. And yeah
@bickybickford11 ай бұрын
Awesome!!
@WoodByToth11 ай бұрын
Thanks!
@99octan11 ай бұрын
Sauber
@sdspivey11 ай бұрын
Why do you need a handle? Just put your fingers into one of the holes and pull.
@WoodByToth11 ай бұрын
I think a tall/long handle will help finish it off. We’ll see though.
@paulkolodner244511 ай бұрын
need....knob...
@TheDedicatedDrifter11 ай бұрын
Need a door man 🤵♂?
@tylerfdearing11 ай бұрын
so.......many......dominos. anyone guess how many? i say 303 holes