RopeWalk ／ home made tool for model ship

#modelshipbuilding #shipmodeling #帆船模型 #ROPEWALK #糸撚り

[@diyhometheaterguy]

Excellent!! Thank you!

[@g-kip]

Thank you, Great bit of kit, saves a fortune on ropes, I need to make one

[@craftlabo.tanaka3259]

thank you for watching❗️ I'm trying to make anchor cable 😊

[@FranciscoGarcia-ce3ub]

Muy ingenioso 👏👍

[@craftlabo.tanaka3259]

thank you❗️

[@4iekurs26]

Thanks for the video ;)

[@craftlabo.tanaka3259]

thank you❗️

[@JayJSMN-tz1nv]

Well done👍👍

[@craftlabo.tanaka3259]

thank you😀

[@tomt9543]

SWEET!!

[@ekosulasono8777]

Awesome

[@craftlabo.tanaka3259]

thank you🙂

[@ekosulasono8777]

@@craftlabo.tanaka3259 can you make it for me, then send it?

[@adam3925]

Awesome job you did I'm trying to make one but I can't find the brass gears can you tell me were to buy them

[@craftlabo.tanaka3259]

thank you for watching😀 I bought brass gears from japanese web site "モノタロウ"

[@adam3925]

@@craftlabo.tanaka3259 thanks you

[@adam3925]

Hi , Ones again sorry to bother you can you tell what is the diameter of the acrylic sheets and the thickness thanks

[@craftlabo.tanaka3259]

acrylic sheets size is 110×70×5. try it😀

[@adam3925]

@@craftlabo.tanaka3259 thanks you 🙂

[@diyhometheaterguy]

Where did you get the kit for mounting the motor and the plastic gears?

[@craftlabo.tanaka3259]

It's TAMIYA kit.I got it from AMAZON.

[@michaelmercado2828]

HI this is s great video clip. I'm about to connect the Flange Coupling Connector, to the brass plate . Can you tell me the diameter of the Flange Coupling Connector, that you used....p.s. Is the diameter of the brass plate 50mm and the 1mm thick . Thank you very much .

[@craftlabo.tanaka3259]

thank you for watching😀 The diameter of the flange coupling connector is 22mm.I hope your work goes well👍

[@OwnerPlt]

👍

[@craftlabo.tanaka3259]

thank you❗️

[@alexg643]

It would be really helpful if you could provide links to all the parts in the description of the video

[@craftlabo.tanaka3259]

I will do it❗️

[@HernanieLegaste]

Where i can buy that little machine?

[@craftlabo.tanaka3259]

Thank you for interest❗ This is a homemade creation, so unfortunately, it's not for sale😓 If you search for 'rope walk,' you might find commercially available products.

[@laurenblakley8069]

Can you share your pattern, the parts you used and where you obtained them?

[@craftlabo.tanaka3259]

thank you for watching😊 There are no drawings. Since there are many parts, it's difficult to explain everything at once,sorry. Please request any information you need. Almost everything was purchased from Amazon or モノタロウ.

[@laurenblakley8069]

@craftlabo.tanaka3259 OK, What are the size and tooth ratios for the gears?

[@craftlabo.tanaka3259]

big gear(base circle diameter φ35);number of teeth 70, module0.5 small gear(base circle diameter φ7.5);number of teeth 15, module0.5 OK?