Making the $655 boots Indiana Jones should have worn (Alden Indy)

[@RoseAnvilBuilds]

Get a Rose Anvil Kiltie here - bit.ly/3lJ0oXd or here for No-Show - bit.ly/3YFtYLX

[@okthen22ok]

or buy a piece of leather and cut it yourself! lol

[@nrvanderpoel76]

Where do you get the thing you put the shoe on, the anvil or whatever, I don't know what its actually called

[@spotifyjustin]

I would pay some serious money to get my hands on a pair of rose indies.

[@ObtuseRhombus]

That's a fantastic name, to boot!

[@alexsherel3344]

I like Anvil Indy better.

[@markb9892]

I agree. I would too.

[@samking4179]

Just buy the Alden Indy 404. They are better than the ones made in this video.

[@coreyharmon6999]

@@samking4179 No, they're not. Did you actually watch this video or just skim it? The boots built in this video are superior to Aldens, even the 404. Alden is overpriced junk, tbh. Their vintage boots were far better, but they are trash these days. However, even their vintage boots don't hold a candle to what was built in this video.

[@darylmorning]

Taylor is a master artisan of the greatest kind. One who not only shows us how the work is done, but does it FREE!

[@worstworkshop]

Would have preferred a stealth mod, where the original appearance was maintained, but materials were upgraded. It's really not an Indy boot anymore, is it?

[@Highland_Paddy]

well, it's definitely less period correct, for starters...

[@NormanF62]

If you mean the Vibram soles and all the nice hardware, maybe not. People today are looking for comfort and durability and you want to get your money’s worth. A company should stand behind its product.

[@klausbecker4745]

nice remake! i especially like how you tied the upper to the insole before welting and the threaded nails and brass nails. good choice! i have some tips that could be important for the construction though: the insole you prepared is actually the pattern for a normal, flat handwelt construction. for a norwegian welt you don't cut the little step on the outside sole edge! the holdfast itself is moved outwards and starts right at the sole edge and the awl comes out in the centre of the edge. this is way more durable, the outcome looks a lot cleaner and welting won't give you such a hard time! also wet the surface of your insole before channeling! as you know wet leather is easier to cut and work = more control = cleaner results/less injurys. it also creates a guide for an even depth of cuts as the leather portion where the water hasn't reached is harder than the wet surface. then you allways advertise that your wallets are saddlestitched. that is also how solestitching ideally should be done! one awl, one thread, two needles. your boots take more beating than your wallet. also it is not necessary to make cuts in the welt for flaring it out! i can see you had some trouble folding the welt along the heel and toe of the boot. this is avoided by: a: the right insole prep that i mentioned, b: trimming the welt to a smaller width BEFORE flaring out, c: pushing instead of tightly pulling the welt to the upper while stitching. you have to handle it very loosely and give a little extra welt material in every stitch. this way you extract the tension that makes 90° folding impossible and weakens the sole construction. and d: on sturdy welt material you can create a little groove in the flesh side, lengthwise along the line where you eventually want the welt to fold over. not to deep! around 1/3 of the thickness. ...no critique! just a bootmakers thoughts :)

[@jonfetzek3053]

14:39 I could be wrong here, but it looks like that gusset isn't fully sewn together in the bottom corners. Doesn't that kind of negate the whole idea of having them sealed with a gusset tongue?

[@bwofficial1776]

Now this is what a $600 boot should be. I like my Indy 405s but the quality is not commensurate with the price. The welts on mine are stitched differently at each end and the back of the quarter is starting to pull up on both. Alden has convinced everyone that expensive = good and that they know best.

[@InGrindWeCrust2010]

At first, I thought this was going to be the same as any Indy upgrade by Bedo's, but you made it RA's own thing. Personal taste aside, I think the Thomas heel shape should have been kept. Beautiful job...the gusset addition was perfection.

[@DMorgan77]

I would gladly purchase a pair of Indy's if this were how they were made. Great video

[@mercedcali6519]

awesome build like the gusset, welt, new arctic sole. I would have still liked the cork and something else to make the boot more comfy as Doctor Jones is geriatric. Also not too big a fan of the hiker style eyelets but merely on the aesthetics. Awesome build! I expect to see a review video after miles of wear. Keep up the great work!

[@rikcazares7643]

I prefer the look of the original ones too. It seems that with the gusset, the eyelet replacement was not needed.

[@chinatownboy7482]

To make the boot more comfortable for a 90 year old Indiana Jones, it needs to come with a walker.

[@bassheadlife492]

Leather is literally more comfortable than cork

[@ArtbyPatrickPetruccello]

@@rikcazares7643 The tongue on several of my Alden boots will slide to the side(other manufacturers do as well) and their eyelets are terrible. I have sent brand new Aldens out for new eyelets prior to wearing. Certain models they are fine however the speedhooks are brutal and if you sit with your ankles crossed they can rip your pants and have had them gouge the other boot.

[@nankuvapes]

So much good quality materials and techniques invested in the remaking of this boot.

[@HcmfWice]

I was fully expecting you to completely replace the upper as well. Nice to know that there’s at least something remaining from the original boot.

[@maxwell66]

i was thinking the same thing.

[@cooperrumph6868]

My favorite build yet. Those turned out incredibly well. Like a more uptown version of the JG Razorback. Props. I wish more boot makers would adopt these features.

[@alangriffith2054]

Now I would own those pair of boots. Alden pay attention this is how to make the proper boot.

[@JoeyDecay]

If only I had the patience and tools to refab boots. Truly some amazing work on this channel

[@ericlarsen2293]

The boot of Theseus

[@sputumtube]

I wonder if some of the wide range of farriers hoof knives may help with the trimming? Just a thought.

[@thomasbradley9012]

For the toe knife build, it adds a whole new meaning to the steel shank in the boot.

[@favidh1934]

Frank Reynolds will give you a whole new meaning of a toe knife....no botch job!

[@billystpaul8907]

Another nice build. This is the way Alden should build their boots for the amount of money the Indy boots now cost. Now you have the pefect winter boots for winter in Salt Lake,,,

[@nickwilson5379]

One of the most badass mods I’ve seen for some Indys. You could do anything in those boots now.

[@c.s.n.7695]

I feel like you could take a Thursday Diplomat, and make a “knock off” version of this exact boot!!!

[@gqfiend]

4:41 the drifter 1 was FANTASTIC. I don't need more boots...but I might have to get drifter 2.

[@shelbinamo]

I hope that the people at Alden watch this video.

[@joe_ferreira]

I am sure they already know how to make there boots better. These improvements have been done for years and are nothing new. But why would they sell the Indy with this construction increasing the cost drastically when 90+% of there customers are never going to need the upgrades displayed in this video?

[@C18H19NaO5S]

@@joe_ferreirabecause not using real leather is a rip off for that price bracket lol

[@XiaNingTian]

I'm sure one of the vendors asked, they'd put in a special order for it. I've seen smooth chamois, 403 CXL Indys with a lug sole, CXL with a commando sole, 405s with a 360 split welt and commando sole, CXL Indys with a 270 welt and wedge soles, different suedes and such. I'd love to see a 405 with a lug sole from one of the shops, but there's still the 404 Kudu Indy too.

[@1979augistine]

No they laughing as they swim through there money like scrooge Mcduck .

[@thegreattuna7187]

They'll do it for $1k a pair. Lol

[@OgeiDennepeL]

It’s incredible that of all the shoemaking channels I follow,this is the only one that shows even just a glimpse on how to do a decent storm welt/Norwegian welt.

[@klausbecker4745]

search for "crazy about shoes norwegian welt". its a very detailed shoemaking channel

[@mphilleo]

That was an extremely satisfying video. THIS is what Alden should be selling and it's the only way I'd be willing to buy a pair at their asking price.

[@tracejohnson6273]

Awesome video. So much fun to see you work, especially given the craftsmanship and seeing you elevate the materials and techniques. The Arctic Grip sole was a surprising choice. I mean, the lo-pro lugs and winter traction totally make sense, but the harder rubber seems less suited to all-terrain pursuits than say the Megagrip or V100 White X. Also if the goal is to make a grippy shoe for adventures that one could also wear in the classroom, a sole warned to scratch indoor surfaces, like the Arctic Grip, is a tough sell. BUT I’m definitely no expert and this shoe is dope no matter the outsole.

[@GianmarioScotti]

Almost perfect, except I would have stitched down the midsole and not also the outsole. I prefer the option of just pulling off the outsole when wornt out, and gluing on a new one, instead of having to cut the threads every time a new outsole is needed. Plus, having those threads protected from the harsh terrain is a great advantage. It's why Hanwag does it that way.

[@klausbecker4745]

yes + some nails or screws! an other nice option for maximum durability is to stitch the midsole to the welt and don't cut it flush to the welt edge but protruting a bit and then stitch the outsole only to the midsole. This also protects the softer welt leather from wear! thats also how white kloud does it

[@jimmylarge1148]

I looked up the hanwag, pretty underwhelming. Looks like Nikes crossed with la sportiva.

[@klausbecker4745]

@@jimmylarge1148 ^^true. pretty ugly. but i saw they also have some norwegian welted models. and the point was the possibility to resole without cutting seams and taking the whole heel off every time. you get more wear out of this because you don't have to perforate the welt, each time your rubber outsole is worn out. i am more of a halfsole fan anyway. looks better imo, is more repairable and a leather heel construction is more durable without the layer of rubber in between.

[@ReekIan]

What a great improvement. Those would be some awesome boots to have!

[@LaymensLameMan]

Bro. You guys have made my dream boot. I guess the only changes I’d make is give it a split sole

[@alanc6468]

Shouldn’t you add some fabric between the leather layers so it doesn’t squeak?

[@briantyrrell3657]

Great project! I really like the Alden look. Interesting to see the Storm Welt.

[@lh8372]

Another amazing idea! Great job guys. More companies should offer this. I’ll be taking my new unworn Alden Indy’s to my cobbler with this link to have this exact build done.

[@Curionimbus]

Loving the channel and the things you do. Agreed, watching Taylor (sp?) skillfully disassemble, restore and upgrade is a pleasure. Super pumped and happy to see you've collected so many dope machines to aid you in furthering your craft. Can't wait to watch the next one. Cheers!

[@thecoffeeblog]

Alden should be ashamed to charge $700 for that

[@dl6860]

THIS.

[@chinatownboy7482]

Everyone else should be ashamed for paying $700.

[@dasenuff]

F-n unions

[@ivanharlokin]

@@dasenuff Moron.

[@jesot]

$800 now. ffs.

[@user-JamesBond]

I’ll pay for these boots!!! Love the build.

[@OeyvindH]

Really liked a few of the modifications that you guys made to the shoe - in particularly the insole/midsole and heel block. Having said that, I would have wanted you to keep the original sole and rubber heel profile. The “massive” rubber soles makes the shoes look somewhat different to the originals.

[@mikem2132]

Very nice! I’ve never had an issue with the leather shank on my Indy boots, I thought it was interesting that you changed it out.

[@markdunn1931]

Heel stack just beautiful, well done.

[@212Hasse]

Excellent Craftsmanship. Excellent Segment. Wish I can Purchase 2 pairs - Brown and Black.

[@markdunn1931]

Unbelievable beautiful work true craftsmanship. Well done, love to find this boot on the market. Cheers...

[@NDB469]

Looks good, keeping the sleek profile while adding some key improvements. Just lovely

[@michaelhess4825]

Wow! Keeps the look almost exactly, but 100% higher quality! I'd buy that!

[@MrsStuntz]

This video is so soothing to watch! Thank you 👍

[@LewieTenorio]

Rose Anvil boot videos never disappoint!

[@mikewayne3118]

Avoiding metal detector going of with Carbon.. but then adding Nails😅. But i love your stuff

[@MBdrummer3288]

Guys, that is hands down SO MUCH BETTER! Love it! Nice job. Love you guys. Keep um coming please!

[@bluesbrosg4ev853]

Seriously awesome! Way more than I was expecting you to do. Channeled insole and gusset tongue!! When is the pre order!?

[@JoeyDecay]

Was the filler that replaced the cork a full grain leather? I would assume so. It just looked weird but it may have been roughed for the glue already.

[@claytonberg721]

They look fantastic. I wonder why you went with vibram arctic grip through. The ultra soft rubber wears through pretty quick. One of their work boot soles like olympia or fire and ice is 80 percent as good as arctic grip and much harder wearing.

[@NormanF62]

In my experience, very few boots have wear in the front and mid soles. Its always the heels that are going to pronate,stretch and wear down because people put a lot of pressure there especially if they’ve high arches. That’s the one that usually gets replaced first.

[@CeliceDSCh]

Boy, the changes look subtle outside but really added significant impact to the boots

[@JLG304]

Amazing modifications! Love the look of the 360 welt.

[@spartanB0292]

I could barely tell the difference. Great work!

[@ashotinthedark3182]

For me neo cork sole,steel shank(airport has you take off your shoes),standard eyelets(no speed hooks)leather over the inside., everything else was fine.

[@nicholasdelgiudice2263]

Apart from the gusset, general quality, and the eyelets, the finished product seems to be pretty similar in concept to J.Crew's take on the Indy boot. They call them the Kenton Pacer and they've even released versions with horween leather, akin to the Alden's. I've had a pair for about a year and put several hundred miles on them on various terrain. Absolutely love them, second in comfort only to my Blundstones. The vibram soles provide great traction while being low profile enough that I get away with wearing them in the office and with a sport coat/casual tailoring. I'm sure the story inside is not as durable or high quality as the RA build here, but I must say I'm impressed with the boots I got on sale for less than $200 (with what seems to be a 360 degree GYW?)! I'd love to see Rose Anvil find a pair of these other Indy alternatives to see how they stack up at their relative discount price. It'd be good to see them stack up against the Weston's as well. Thanks for all y'all do, these are a great set of channels!

[@CaptainWillard830]

Nice video? I’ve had my Alden 405s for a couple of months now. I love them as they are. I’m a GenZer who grew up watching Indiana Jones movies. I’m also somewhat of an adventurer myself. Lived many adventures in the 22 years I served in the U.S. Marine Corps. Been in in countries around the world wearing “civilian attire.” I’m am confident that if I had to run, jump, pivot, fight, etc. in my Alden’s as they are, I would be able to do it. These are also the most comfortable boots I own. Second only in comfort to running sneakers.

[@brunonjezic6208]

I like the idea of gusseted toung and channelled insole. Good build

[@thomasdurant7907]

Wow. Weston had to hire a boot maker and a bunch of machinery, with all those youtubebucks, to get the boots he really wanted! That's some serious flex; not only are my boots custom, I bought the craftsman and his machines.

[@JDJohnston9906753]

Also, if you want to ride this Indiana Jones train a bit longer, I would love to see you cut open a pair of Wested's Adventure boots. Wested made the Indiana Jones jackets for the films. They do a line of "close enough" Indiana Jones style boots for those of us who don't want to take out a loan for a new pair of Aldens. I'd love to know what's inside of those. Maybe think about doing a video on the Wested boots? Thanks!

[@856Dropout]

It’s nice to know where to get the tools, but I’m lost on where to get the leather stock.

[@cahillm2]

Gorgeous work! A true craftsman

[@YoYoRaeRae]

I know it’s so much better constructed, but oy vey will that suck to break in with all that leather! Hopefully, Indy has fantastic cushy insoles. GREAT work!

[@nikoscabc123]

Plus no Thomas hill which is vital for this boot (it is more of an orthopedic boot) and because of all the leather the shank is only making it worse to break in and pointless. They shouldn’t use one.

[@crtune]

Taylor showed us some really nice cobbler work here. I wonder how much really would this type of treatment add to the cost of an Alden boot, and why not offer an "enhanced" version to the more discerning public (yes, I know they are few in number, but hearty). LOL I really enjoyed this one. Especially the great work on the gusseted tongue and the Norwegian welt.

[@WizzdummHeadley]

Very nice work! I always wondered why a piece of rubber or leather wouldn't be preferred over cork!!!???

[@AssoziationHmH]

Love the new and upgraded version. Especially the two-toned gusset is beautiful. I would rather have the Boot with eyelets which are just not as sharp as the ones, the Indy boot uses, but it looks good too how you‘ve built it :) Keep this kind of content coming, it’s very enjoyable👍🏻

[@Dallin9000]

Nice job with the voice over, Brody!

[@michaelsudak6559]

Is the upper leather really that good to warrant replacing everything else?

[@evsnova74]

Thanks for the links for the tools, but where do us non professionals get the materials? Lisa Sorrell has a lot but not everything.

[@joshsnyder629]

Would love a rough cost estimate on stuff like this! Great video.

[@OnTheScout]

Why was the original 3 rib shank not put back in?

[@hawk8789]

Why all the hate for Neocork? It’s my favorite sole. I just did a week long hike in Northern California in my Indy’s and didn’t slip once in rocks or sand or pine needles. I’m wearing them now and hate taking them off. In my experience with several different Aldens, the right size makes them the most comfortable shoe, but a little too long, and it feels right, but loses all the magic. It took me a lot of different lengths and widths, but I get it now, and wouldn’t change a thing on my Indys.

[@Nick-ul2bp]

Because these folks don't actually seem to understand what the Indy boot is. They, and all the commenters want it to be built like a White's boot and that's not what it's trying to be. I think they kind of ruined the boot with this build to be honest. The neocork outsole is actually pretty fantastic. I have some of these overbuilt rugged boots, but I also have a pair of Indys and I would not like them more if they were built like a White's or Nick's boot. Only thing I'd change on them would be to put in a proper leather heel stack and midsole. Other that they're fine.

[@barnham9388]

I love those boots! I want a pair! Can I ask anyone with experience of them - those vibram arctic soles - are they as hard wearing as a normal vibram sole if you use them all year round or are they maybe a softer rubber compound to make them more grippy in snow/ice?

[@wastelandranger6021]

Looks so much better!

[@brentjacobs7083]

I need a pair in 121/2 e. Thanks guys. They’re sweet.

[@MrSilvervw]

Fantastic craftsmanship 👍 👌 👏

[@0num4]

Damn, those are some nice looking boots. Well done!

[@dstrbd223]

I have a nice pair of Corcoran Jump boots that I'd love the same treatment to, that you could make a video about("How the Army should have made the jump boot")

[@simonmandrakejones]

Very impressive build. Well done. As I know that there are some passionate Alden lovers out there, I would be interested to hear one of them wear these and give their opinion. The big advantage we hear about Aldens is the comfort (I don't own a pair, so can't comment), so I think it would be good to see if these are more or less comfortable. Also, would leather on leather in the midsole and cavity not lead to squeaking?

[@brendanclugston6769]

Do you recommend or can you to change the color of the Alden Indy to get a less reddish brown and a more brown color. Beautiful modification by the way.

[@XiaNingTian]

Or you could buy the 404 Indy with the lug sole already on it. 360 welt, Kudu leather, Vibram lug sole... Still, I'll be checking out the Alden vendors to see who puts in for a 405 lug sole Indy make up.

[@hells_razor8276]

is the fiberglass shank better than a leather shank? Sending my boots into a cobbler to get re-crafted and im taking notes. lol

[@denismourenas4876]

Awesome build ! I'd love to get a pair of these if I had 600 bucks laying around... maybe next year ?! Hahahah

[@1976danger]

Make your on version so I can get my hands on them Great Job!!

[@nickrenton2668]

Now that is an Alden I would buy. At the price of the regular Alden, there’s no way I’d buy a pair. But these? Hells yes.

[@thefrog9119]

So now you have a cobbler full time, great ❗ Can't wait to see more upgrades on "standard" boots. 👍🏻 And I thought you were cork addicts.

[@chinatownboy7482]

Someone could rebuild and resell Indy Boots, and make a fortune.

[@suitrBJ]

Don't think you should've used vegtan leather for filler even with other shoe/boot maker's they'll use a chrome tan or cxl like leather to fill. I'm sure Indy would want his feet to not be tired/sore. Even porons a really good filler, it seems to get bastardized but it's a good filler.

[@nacekozo]

Steve from Bedo's has also upgraded a couple of pairs of these - they look so much better afterwards. I almost fell for the hype a couple of years ago, and I'm glad I didn't.

[@BTBHSOHBOY]

This has me thinking about the possibility of someone modding those Wested Indys to have these specs and then selling them. I imagine they would end up coming out to a similar or lower price to the stock Aldens, and they'd be leagues ahead

[@notintheface360]

Are there shops in Nor-Cal or around that could that people could recommend that could do these types of modifications? A gusseted tongue would fix my major issue with my Alden Boots.

[@LejendaryLoozer]

Taylor kicked some major ass in this video, great job.

[@JeremyGiese]

Seems Alden should inquire you guys how to make a better boot or actually watch the video. I don’t wear boots anymore since getting out of construction/roofing but I appreciate and enjoy all the content!

[@jakejohnson7396]

Will you make this available to others?

[@BrianGray89]

Whom do we contact to have this done to ours?!

[@eddharbin3966]

Off topic but have you ever though of testing the Westly richards courtney boot ? Would love to see them tested by you .

[@kelel47]

Would love to have a pair of these

[@brunonjezic6208]

Is there anyone having the problem of feeling the shank through the insole? I only hear they are super comfy. I understand that due to the fact split leather insole is much malleable than full grain. It feels like it was mentioned just to push the point of original materials being bad

[@jordantheokay3168]

I lace my boots up tightly as I can get em. I was wondering what the benefit is of a leather shoe lace? They sell them at my local hardware store but I always get the cotton ones, because I dont want to gamble on leather laces unless I find out they can take as much tension as I put on my cotton ones.

[@ryemill7787]

I lace my leather ones up decently tight but I find best thing about them is the leather laces dont slip or come untied

[@sylvainplouffe9992]

😮🤤I live in Canada And I want those. Wow that vibram sole speak to me because regular vibram can be very slippery on ice or hard snow.

[@kylephelps7817]

Now these are the Aldens I would buy!

[@tonyrc49]

Would love to see a rose Indy boot made from scratch. Maybe put a $400 MSRP 🤷🏽‍♂️. The rose modified indys look fantastic, huge upgrade from the original.