SRI Resetting with VCDS

A short video showing how to reset the SRI message in the instrument cluster after service or maintenance has been performed.
Free support for our registered customers on our forum:
forums.ross-te...
Free technical information on our wiki:
wiki.ross-tech.com
Looking to purchase the top rated VW/Audi diagnostic tool:
store.ross-tec...
www.ross-tech....
As always, a couple of easter eggs are dropped in, good luck.

[@MotorHeadTech]

Neither option works on a 2015 Audi A3

[@zs9458]

Hey Ross tech! I’m installing new seat belts on a 2016 Audi S3. I’ve got the codes B130455 and B130555. On your wiki for front seat belt pretensioners it’s says “seat belts must NOT be plugged in”. What exactly do you mean by this? Do you mean the seat belt buckles must not be buckled in, or all of the actual electrical connectors should not be plugged in? Any help would be greatly appreciated. Thanks!

[@gharbi1965]

thank you for the video please can you make us a video for the Polo sedan for the mileage because my car and the storyteller and closed 999999 and thank you Polo sedan 1.6TDI thank you very much

[@donatovictormelillo9170]

Hey, i got some sort of problem. my grandpa decided to delete an important code from the closeing system of a seat and now the doors do not work. is there any sort of way to get that code back, he was useing this program (vag-com 409-1) and no one could fix it, any sort of help whould be good... thanks in advance.

[@azlisham4927]

how to perform the removal mechatronic dq200 position Gear selector to N with vcds..

[@azlisham4927]

Can u explaint

[@tunedude1604]

So on this, are you able to change the mileage the service interval comes up at? Mine got changed to the yearly service plan the other week because I want oil changes done every year, but it was set at 365 days or 9400 miles. I'd rather it was 12000 miles.

[@MKasap-te8vm]

I don't understand about Fix data and No fix data.

[@risting-pc-service5150]

Amazing software vcds

[@mailjabber]

In the SRI page yours says “poor quality oil” I have that too and I run the 5w40 Leichtlauf in a 2016 Tiguan CCTA TSI 2.0. I just changed the oil and vcds says “poor quality oil”. What’s going on there?

[@TzOk]

My guess is this indication is solely drive-cycle-based since the last SRI reset.

[@ohheyitskevinc]

Poor oil quality just means how long the oil change interval or cycle is. 10,000 miles/12 mos is “poor oil quality”. So all North American VW/Audi cars will show “poor” which is confusing. Doesn’t mean the oil quality in your motor is bad. “Good oil quality” is a 20k mile interval. You can change the interval from poor to good in VCDS.

[@welniukas19]

I have vcds and newer used this function

[@redadiagnostic4631]

Nice bro from 🇲🇦 Morocco 🙏🙏👍

[@lincoln341]

Thank you

[@ricric828]

Super vw b5.5. multumesc the best

[@ionutmadalin3172]

1:18

[@kemalkaya3047]

It's amazing fast 👍

[@anapaulapereira3255]

help vcds no conet no responder

[@nicolassarasola7825]

Por favor me podrian ayudar?? me sale este error en el VCDS " 014 can't decode, code file not loaded" soy de Argentina.