RotoPax Extension Mount

I decided to add a gallon of water to the gallon of gas that i had mounted previously. You need the RotoPax Extension mount, to make that happen.
Buy Here: goo.gl/AzJBHG
RotoPax Fuel Canister: • RotopaX Fuel Cans Review

[@gundie22]

Thinking of doing the same setup for my Tundra and I've been wondering how the extension worked. Your video showed it perfectly. Thanks

[@gidieupp]

don't strip the threads dude

[@Huaracha_93]

ahhhh I can't watch it no more :O

[@0xArjay]

Will those gas tanks expand due to the heat?

[@HarleyWood23]

no. the plastic is very thick. roughly four times thicker than most of the typical gas cans that you would be familiar with.

[@Countryprepper]

Very cool man! I gotta look that up for my truck.

[@koalafan1576]

I’m curious why you have them mounted floating.

[@hazeystoner]

Thanks for posting this man, it helped me a bunch on what to order. I love the the rail system mount!

[@billhammerling7156]

Are thise one or two gallon containers ??

[@SHOTGUNJIM1]

what type mount was used on the toyota rails.are you about. the cargo rails

[@beardedhussar1755]

Oh boy, my wallet is nervous.

[@HarleyWood23]

yeah man. it's probably more expensive that most people would be comfortable with, but sometimes the "cool factor" just makes it worth it

[@UARAF16]

That's a really cool product

[@israelclark2870]

Thank you so much!

[@media1newsriverside]

What mounting bracket did u use for that set up

[@HarleyWood23]

marc nascar Hey marc. I cover all that in my first video. Check out the video description for links to everything. kzbin.info/www/bejne/fl62qKSebNZ0pJY

[@boxerdad214]

I'm thinking I need this for my Tacoma, r u running a Toyota ? I'm wondering about mounting inside my bed

[@HarleyWood23]

Yep. I have a Tundra. You probably have these same bed-rails

[@boxerdad214]

+HarleyWood23 I'm gonna pull the trigger. Thanks for spending my money bro. R u on IG?

[@HarleyWood23]

+Christopher Rainero yes sir. my YT username was taken, so look for "_harleywood23". (note the leading underscore)

[@HarleyWood23]

+Christopher Rainero also on FB at: facebook.com/HarleyWood23/

[@Hudson4426]

cool product. but it sucks that you have to take it all off to get to the fuel

[@HarleyWood23]

you only have to loosen the tang holding the water, pull the water container off, then loosen the tang holding the fuel. You don't have to take it all apart like you see me assembling here.

[@Hudson4426]

oh ok... plan on getting this same set up for my truck and FJ

[@philoeolivarria448]

Hudson very rarely have to use the spare fuel.....water yes......

[@donschlonski2936]

That's wrong. You cannot use the Rotopax lock the way you have this

[@XYoverland]

Yes you can. The issue with the lock on the extension is it can be defeated by spinning the entire outer can. In a case like this where the can is secured close enough to the top rail or side, it can’t spin freely and the lock will still work the same as on a single can.

[@jacobfaulkner4764]

HarleyWood Make video on the meth lab?

[@HondaFit4Adventure]

Word of advice, dont buy the locking pad mount.

[@donschlonski2936]

Why? I just started using my lock and it seems to get stuck and not pull out! Is that what you mean?

[@HondaFit4Adventure]

@@donschlonski2936 Theres plenty of videos on KZbin including my own channel of the lock getting jammed. I lubed it and even covered the hole with tape. It literally jammed on camera while I was taking it off in my garage.

[@HondaFit4Adventure]

@@donschlonski2936 kzbin.info/www/bejne/mWPLXpqea5KGd7s

[@donschlonski2936]

@@HondaFit4Adventure oh! So what I just experienced in my garage is normal! Can't imagine being out on the trail in crisis mode without my garage stuff and have to try to get that lock out! Time for a licking cable instead