1928 Model A Tail Pan Fabrication & Quarter Panel Repair- Yard Art Model A Build- Part 9

Finally had a little time to work on the Ol' Yard Art Model A over the last couple of weeks! Made a new tail pan from scratch, lower filler panel, and repaired all of the sheet metal on the quarters from the doors back. Lookin' pretty good at this point... With pretty much all of the major body repairs done at this point, the next job is going to be the installation of a steel roof. Stay tuned....

[@62_C10]

Best part of watching you build cars is you don't talk it to death! Thank you!! It looks great!

[@MartinSBrown-tp9ji]

Your videos are the best body wielding details that I have seen on KZbin. Short and to the point.

[@andrewfletcher5584]

Yes! Am supposed to be calling it a night but I'm watching this!!

[@AnthonyMolyneux]

The Picasso of the panel….

[@doodadofdeath5673]

what an amazing show case or raw skill.

[@tmer3806]

Late night release. Anytime a good time..🤙🤘

[@jackflight2756]

You are a genius! This is much better then watching a James Bond movie!!! Fantastic!

[@joelcardoso8606]

Mindboggling skills...

[@stuntmania3000]

So glad to see you back in action mate!

[@smasica]

Love the videos and watching you fabricate stuff. I know you have a ton of projects and other commitments, but I wish there were a lot more videos on this project. Look forward to the next.

[@xMrJanuaryx]

Finally! Been waiting for this video!

[@brianvalley5223]

Nice project.

[@nissmoguy]

thanks for sharing looking good

[@ryverewing1439]

Good stuff. Been waiting on this one!!

[@michaelgillespie1206]

It's cool how you put all this in one video, that car looks to be in pretty good shape to have been yard art.

[@QBRX]

You're a wizard. Fabulous work!!!

[@vintagemetalgarage]

This was so satisfying to watch. Nothing like replacing rust with steel. Looks great. 👍

[@stephenkrzanowski]

Excellent work as always! 👍🏻

[@woody77788]

What great work you do, enjoyed watching!!

[@AndysDogHouse]

Hey, Rotter's. Good video. You did a fantastic job on the new panels. It sure helps to have the right equipment. Thanks for sharing.👍👍🍁

[@geoffreymills9932]

I dig the 2x hammer form, very creative with the patch work too, nice work

[@jackjaeger2189]

Love the way you explains things without loosing me, The editing is spot on. Where's the rest of it?

[@steviegibson5847]

Absolutely bloody fantastic. What skills

[@stefanwauters349]

You have awsome metal building skills. Greets from Germany

[@charleskuder3968]

Very good work,the best I have ever seen.WHAT A Pro!!!

[@1coppertop]

I watched part 1 then saw yard art 2 today(it was in the title so i remembered it) then i went straight to this video. Very cool metal work. I use the same techniques over my tin work career and hobbies. I subscribed

[@BoxcarsGarage]

Kool man! Knocking it out.

[@robertkrupa2552]

That thing is looking good Ben, it's starting to take shape. Hope you get a warm spring and keep building cool stuff.

[@kakarrot62]

damn! i cant wait till the next video! awesome!

[@bernardwill7196]

This model A will be better than new, if it is completed. Greetings from germany.

[@brettsfishingdiaries]

just found this channel, extraordinary fabrication work bud, new sub from the UK

[@modelcars2978]

Amazing work, brother.🤓👍

[@mopar4656]

Nice job! Looks like it grew there.

[@521farmer]

!!! Wow thks for sharing your project ya come along way ya make it look easy mine is about the same lot of patients and time the bottom thought wood be harder to but ya got this Later from the SK the Canadian side

[@k-dawg3893]

Awesome job dude!

[@mf72se15]

Mad Skills, dude. That's a lot of work for a $99 patch panel.

[@squidkid2]

It's really amazing how far you've come on the body considering what you started out with. I enjoy watching someone take the worst piece of junk they can find and re-doing it from the ground up. That takes real skill and a lot of creativity. I think of people like you as metal sculptors not just gear heads.

[@jerrypeal653]

Some good body and fender mender work .

[@mechanics4all405]

first class great content,fantastic

[@greenmountainman9160]

Thanks for making these videos! I love to watch you bring this thing back from the dead. Very cool to see it all come together and good to watch someone who knows what they're doing haha.

[@chrisdefruscio9741]

Nice job!

[@josephchivers8637]

Another fantastic video. There is nothing better than seeing something broken being fixed and you are a true master. I love the style of your videos. You explain what you are going to do, then just get on with it. Perfect!

[@jeffboyles3611]

Just amazed at your talent. I came to this party late. I'm a Model A owner and picked this storyline up just today via the magical KZbin algorithm whatever. I've got to know whether the #4 cylinder cleaned up or not. Can't find where that was addressed. That looked pretty bad, even to a non-mechanic. Thanks for letting us in on this project. Really enjoying it.

[@521farmer]

Ya make it look easy thks for sharing your project with us lve got one like this 28 Essexx 2dr suide door lots of work le you keep going mighty fine

[@farfromdonemotors6796]

Been waiting in anticipation. Nice work

[@dougie46350]

You make it look way to easy

[@mr.hanger]

Yay! The model A! Been looking forward to an update. Great stuff as always 😉

[@HeatherMizzell]

On the bead rolls you put in the fender wells I use a wooden block as you did but I have 3 different sizes of delrin rod I have rounded off I use to make my grooves they come out as smooth as a baby’s but

[@wrenchmanhotrods1247]

Try cutting your wire speed back a little you won't have so much weld to grind off . I love to see a good metal man at work .

[@harryshuman9637]

You could also just weld a flat plat, and then weld those bump extentions onto the plate, instead of bending it.

[@CrusadesOClock]

Somehow found your channel again after a year. Just got through the build so far, great work! btw I checked the playlist to see if I missed anything and part 7 is missing and some random video is in there.

[@rottersgarage]

Thanks, got it fixed up. Part 7 is engine tear down and inspection. 👍

[@CrusadesOClock]

@@rottersgarage Yeah I watched it, apart from the obvious damage that engine was in surprisingly good condition. Someone took care of it long ago, good that you're fixing it up!

[@d-_gaming]

Just subscribed she looks amazing. Are you going to keep her original

[@dirtypeanut6590]

Looking good. Any news on the twin m90 car?

[@rottersgarage]

I'm staring at it right now... Lol. I will admit I rushed it in the past, so basically at cleetus last year I did a couple of things that caused an extremely lean condition. I'm sure the tops of the pistons came off. The plan is, as soon as the freaking snow goes away up here, to bring it to the shop, pull my blown up engine out, put the stock engine back in that was in for the first fire up, get it running again. Then the plan is injection, weather it be a sniper, or direct port system, I would like to have injection in the long run. Give me a month or so and it will at a bare minimum be running again. Thanks for watching!!

[@dirtypeanut6590]

@@rottersgarage I understand. I’m from Wisconsin,too. Maybe you could blow the m90s into a TPI injection using just the lower manifold?

[@raywilson800]

⭐⭐

[@eric_seguin]

Okay, its been a month. How is The Yard Art Model A doing? Oh yeah, beautiful work.

[@rottersgarage]

Working on the roof right now... 👍

[@eric_seguin]

@@rottersgarage COOL .

[@sgtcrusher66]

outstanding! what kind of grinding disk did you use on the welds a flop disk or regulur grinding disc ?

[@rottersgarage]

I use plantex brand 40 grit flap discs for just about everything on the shop. Finish it up with 40 grit 2" rolocs on the air grinder.

[@keitheagle4633]

Why don't you use the same gauge metal as the original car

[@rottersgarage]

Had to actually Google what the stock body was made of, because I never would have ever even thought about it.... Honestly I use 18 ga for everything body related here. And the Google search told me model A's were stamped from 19 gauge. Sooo.... Basically I am using the same gauge.....

[@litahsr.8226]

Damn what happened to part 4, 5, 6, 7, 8??? Went to part 3 to part 9

[@dionysiareed5576]

Do you have part 10 of this build?

[@rottersgarage]

Working on it, I'm kinda slow these days on the videos, the shop is packed and really don't have a lot of time for my personal stuff.... Soon.... Roof is next...

[@kixter36]

your videos are so far apart i've been lost interest moved on to watching bad chad