REPAIRING 94 YEAR OLD Model A Ford Doors- Yard Art Model A - Part 8

[@Hillsiderusto]

I never tire of watching someone who knows what they're doing ply their craft. Looking good!

[@hiramdjonesjr]

Watching a once forgoten peace of autamotive history come to the light again

[@armay5178]

Great! Go on. We're happy to watch you working.

[@raywilson800]

It's hard to believe that car was yard art. Your doing great work Ben. I hope you and your family have a wonderful Christmas ⛄🎄

[@melindastclair]

Your work on this car brought me to your channel.

[@gregoryclark3870]

You saved that car’s life

[@gilberthalle9169]

Awesome teacher. Gilbert

[@federicomaisch8019]

Great job! Thank you for sharing

[@chrisdefruscio9741]

I like the way you work! Great job!

[@sebastianaraujo7897]

Majestic! 🤌🏻🤌🏻🤌🏻👏🏼

[@smasica]

Great work. Glad to see this episode. Looking forward to the next.

[@tomwilkinson2184]

Excellent job Ben ,Thanks for sharing your videos.

[@TENSE1983videos]

nice man, cant wait for the next one

[@markusheitmann]

So i found 2022 most under rated Chanel.. new subscriber here, keep up the awesome work! Cheers from Sweden!

[@mr.hanger]

I really like it when the notification bell dings and there's a new Rotter's Garage. Great series with the old gal.

[@kelemenmatetolgyesi9725]

Excellent job, You deserve more subscribers! (Greetings from Hungary)

[@mikeguthrie5432]

You are quite a "metal mover" sir. Back in the 60's, I worked for United Airlines as a sheetmetal/structural repair mech at the maintenance center at S. San Francisco air port. Of course, I was working with aluminum and you're doing it with steel. Anyways, we worked with mostly flat sheet and did a lot of angle bending and used rivets instead of welding. I'm thinking your work is a lot more difficult than working with aluminum. Love watching you do your work. You know what you're doing!

[@k-dawg3893]

True craftsmanship! Nice work man!

[@ThePillenwerfer]

Great stuff and Merry Christmas.

[@babaninja9043]

Anxious to see the finished ford

[@RatRodBobBuilds]

Fine piece of carrying on! Get me motivated to start my 5 window coupe real soon.

[@bantenglewat9799]

Keep it up dude.

[@otodusobliquus3836]

Can't wait till this thing is finished! Personally I would love to see it painted glossy brown with black, silver, and just a hint of orange accents.

[@Dynamighteee]

This is just beautiful hand crafted work. Love it !

[@Piledriver.]

Merry Christmas Ben! The model A looks great!

[@freefloydfreefloyd6176]

Greetings from Poland .Man this is a massive ton of a work you put on a almost 100 year old car ;O

[@randyriggs5463]

Nice job on fixing that door! Lot of work went into that one. Good to see that car taking shape. Nice job!

[@g.o.b.2558]

Looking good👍 Have a Merry Christmas and stay blessed...

[@aslimali103]

Can't wait for your next video on this restoration, it's a super job,great knowledge and great skills 👌

[@ArcticExploring]

Amazing job

[@AnthonyMolyneux]

A work of art ….

[@OSXMan]

Educational, entertaining, inspirational!

[@gregburlet6485]

Awesome vids. Know nothing about cars/welding/restoration but I do now, thanks!

[@jimharvey7838]

We trust you are well and will have new content for us.

[@rottersgarage]

Very soon, it's been a busy winter.... Quarter panel patching and tail pan video next, almost finished up with it!

[@AmonVangrell]

amazing work so far, I cant wait for the next video!

[@richardcentralky3955]

You do great work, gonna be a nice ride. Glad I found your channel.

[@chevahaulic]

Nice work !!

[@charlietabone6162]

That come up good

[@bandacatalino]

Muy buen trabajo, se ven muy bien las puertas. Saludos desde España.

[@alanbower9296]

ENJOYED YOUR VIDEO INTERESTING

[@paulabes4220]

Nice job. I'm working on a 1928 Sports Coupe. This helps with the motivation. Looking forward to the rear panels mine is not as rough as yours. However it's always nice to see some working in a step by step video of the same car as yours.

[@MrMpakobec]

The amount of work put in that one door is insane. I wonder if it almost be the same time to rebuild this door from zero.

[@stephenkrzanowski]

Nice work. Merry Christmas!

[@essentialjudge2279]

Very nice. I had to do my 30 truck that way.

[@adiboss1]

the time you will finish this projeckt You will have at least 200k subs. keep it up ! great work !

[@521farmer]

Awesome thanks for sharing your project with us ya got this for me now ya made it worth giving it go mine got same problem wondering what ya use to weld it on no gas or gas causes ya made it work glad l joined l,m learning lots not much for bending tools but will give it ago later keep it up from Canada 🇨🇦 Sk 😊

[@Rustonrods]

Awesome video series on the Model “A”, your talents and experience shine through! Have you ever tried silicon bronze filler wire? The stuff works great! I’ve used it a lot for filling small pits and rust holes. It finishes nice and filler and paint stick to it, unlike the old oxy/ acetylene brazing. Thanks again for sharing your journey with us. Wishing you and yours a very merry Christmas and the happiest new year!

[@modelcars2978]

Awesome!🤓👍

[@JasonAirInc]

It seems like you could have used your brake (machine) to make all three brakes in those patches...but I'm not familiar with your brake. If you started out with the bottom brake (fold), then did each of the end brakes (folds) using the very end of your brake (machine), the lower brake (fold) would go up inside the end gap on your brake (machine). Hope that helps. I am about to do the exact same stuff to the exact same make/model doors. I started out making some videos on here, but got wrapped up in the work and got WAY behind on videos. That channel is called Troublemaker Customs. The car is a 28/29 Tudor. Thanks for posting this and good luck with the rest of it.

[@CShellby]

Love the videos merry christmas

[@Jacovangenderen]

You’re a good welder

[@gabrielkwiatkowski645]

Excelente

[@flattopalpha5316]

When you reassemble, could you slo mo putting which bolts are used for front fenders /body through. I removed all my fenders and raised body. Fell I’ll for a few years. Intended to reassemble right away and did not sort the bolts correctly. Now my memory of which bolts go where is keeping me from putting my A back together. Thanks.

[@svsv9]

I am pretty sure you could rebuild the titanic. I did not know this kind of work could be done.

[@hiramdjonesjr]

What wire are you running a soild core or flux core

[@hiramdjonesjr]

Have you ever tried to braze with a coat hanger

[@matthewcurtin1611]

Loving this. 7:27, why cut then weld? Why not just weld, straight out of curiosity and that I may be missing out on something big!

[@rottersgarage]

Any time there is a crack, or even a new piece of sheet metal going in, it is best to have a gap to fill with the weld. this allows the weld to penetrate through the gap and fill it. That way when you grind it off there is still plenty of weld between the pieces with a bit off bleed through on the back side for strength. Basically it allows for flush grinding of the weld without removing all of the weld. Also on a crack in sheet metal and more importantly aluminum, it is also a good idea to drill a hole at the end of the crack and fill it with weld as well, this ensures the crack will not keep spreading even after welding. Short answer, its for strength....

[@tmer3806]

🤟

[@Raul_Gajadhar]

Dude what the hell, if I didn't come looking for updates on this project, I would not know what's going on! YT is really getting on my nerves!

[@watto1964]

Awesome job! What are your setting and wire gauge? I always have difficulty welding thin gauge.

[@rottersgarage]

I run .030 wire for everything. Sheet metal I usually run at 19 volts on the millermatic I have, which is actually a little hot, but I run the wire a little on the fast side. Sometimes I'll drop down to 16 for really thin metal... Wire speed usually around 30 on my machine....

[@pattycat100567]

watched this video closely, first whats the gauge of the 2x1 you used for subrails, and 2' whats the grit number for your flapper wheels? is it around 80 or less

[@rottersgarage]

For this one I used 14ga wall 1 1/2 x 1 square tube and I run plantex 40 grit flap discs for everything in the shop. On bigger cars where weight doesn't matter I sometimes run 1/8" wall on the framing. 👍

[@rottersgarage]

I actually thought this was the floor framing video you responded to, flap discs are 40 grit like I said, all sheet metal is 18 ga on body patching.

[@pattycat100567]

@@rottersgarage these are the best tutorial vids on an a- bone ford ive seen,i am probably going to do the same on my floor now !!versus the stock sub-assmebly of the howells catalog,

[@gadid9114]

Can you make a Playlist because I don't find the next movie. Thanks

[@rottersgarage]

There is a playlist up to part 8 in Rotters Garage playlists. 👍

[@louisreniers9887]

Know you are a busy man but how is the engine doing?

[@rottersgarage]

Still sitting on the engine stand from the tear down.... My engine builder and I have a plan, just trying to scrounge up some parts and mostly cash to get it going, lol. Could build three nice small block Chevys for what it's going to take to do this one, but it will be worth it when it's done. 👍

[@louisreniers9887]

@@rottersgarage thanks for the update and have a merry Christmas

[@gustavoroca5710]

For the love of God please change the music 😂