Rough Country 5 inch Suspension Lift Kit

[@TheGscott]

This was 2 years ago.. Lol my truck's changed a lot since then and been through two sets of wheels and tires. And actually these look much better than the Chevys and Ford 1/2 tons!

[@wesleyschulz7171]

Now it’s been 8 years! Do you still have it?

[@christophermichaels8148]

Look at those cute little tires

[@scrappy452]

Im excided! I just bought the 5in and ive got 37s on the truck now. My truck is going to be huge lol

[@TheGscott]

@chanceketchum these were the stock tires which were like 275x75r16 something like that. I have more updated videos with the new wheels and tires on it. Go look at those videos with the 35x12.50r17s on the truck. It is a good kit and reasonably priced.

[@fridayconstructionllc6078]

You have any installation video ? I just order. The same. Lift kit

[@TheGscott]

The lift was $950 @isaiah

[@TheGscott]

The front drive shaft was getting the end caps replaced so I took it off and it was at the shop that day.

[@TheGscott]

@dillon possibly, it's worth a shot for sure.

[@chanceketchum450]

What size tires were on at the time of the video? Not criticizing just curious. I have a 99 dodge ram 1500 V8 and i am looking at buying this kit

[@TheGscott]

@alexdavis they aren't double stacked blocks. Those are the stock ram blocks with the roughcountry lift blocks. If you knew anything about lifts you would know that. And everyone else this is an old video I have 35x12.50s on it now.

[@FULLMETALCAR]

Would yall think its funny if i said i like the stock wheels with the 5 inch lift

[@TheGscott]

What I did shortly after this was acquire some 20” stock wheels from an 08 ram 1500 and ram those for awhile. It looked decent until I could acquire some mud terrains and black off-road wheels. @fullmetalcar

[@JoseMartinez-jw2dy]

The two blocks 😩😩😲😲

[@TheGscott]

The original blocks are stock on the truck. This is how the lift is designed. I had no issues. Worked flawlessly. Tell the engineers that designed it that they are wrong lol

[@JoseMartinez-jw2dy]

@@TheGscott hey don't get mad, I did that once but just one inche block,and yes it looks dangerous and yes designers suck

[@TheGscott]

I’m not mad. Nothing wrong with it. Worked well for me

[@TheGscott]

@Cody it sure never gave me any trouble and I went 4 wheelin often...

[@TheSarge1911]

I was told to use front coil springs from a V-10 in my 99 ram with 5.2. it would raise it 2-3 inches. along with the 3 inch spacer 5 inch blocks in the rear ( 2500 Ram stock 4.75 block) input please.

[@sotos2428]

Do you have more vídeos with new wheels??

[@TheGscott]

@monkeyballsareyou1 it fit with the lift kit I just had to get a parts repaired on the driveshaft

[@cjhowell3249]

did it come with a drop pitman arm and all that?

[@TheGscott]

Cj Howell it did come with the drop pitman arm when I bought it

[@TheGscott]

Yes it did

[@TheGscott]

@CJ yes it did

[@odjvlogs5234]

Hey u think I could stack 2 5inch blocks on top of each other?

[@devinhamilton2006]

If i get a 2 inch suspension lift with a 3 inch body will my 01 dodge look like this?

[@rednecknation5284]

Where was the track rod drop bracket located

[@texasfish9437]

I have mine lifted like that, but bought it like that, do you know if I can use a 3 ton floor jack somewhere on the back axle to raise a wheel?

[@rednecknation5284]

And where is it at besides on the driver side on the frame

[@darlalarcom9739]

How many inch Ubolts are them in the rear for 5 inch lift?

[@brandonprettyman269]

Hey bud installing my lift kit now are you sure you have blocls in rite i thinl directions say to put new block on top and old one on bottom

[@TheGscott]

madison Prettyman I followed the directions for the kit at the time however old this is.. I never had one issue with it.

[@12vcumminslife26]

with this lift does it need longer break lines

[@truncatedbarrelhammercuda8577]

i know im a few years late but did you find out whether or not those are needed

[@128Gauge]

did u have to do the brake lines

[@hogheaven_]

How do I take the stock block off and leave the 4” on?

[@darlalarcom9739]

Put a steering gear box stabilizer on it. It's worth the time. It's cheap.

[@monkeyballsareyou1]

what did u do about the drive shaft did u have to extend it or would it fit

[@TheGscott]

monkeyballsareyou1 it fit! Surprisingly, I was afraid it wouldn't, but it did

[@tylerfelts6679]

did you have to have the front drive shaft extended?

[@club1loner806]

did you take the 2 in leveling kit out ? i have same lift in my 99 ram and the front is 3 and a half inches lower than the back . so i wanna purchased 2in leveling kit from hell bent steel . but not sure if i can do that .

[@khrisshultz2532]

Jarod Exline the kit i looked up said it leveled it in the process, haven't ordered it yet tho so I'm hoping

[@TheGscott]

Yes I did take leveling kit out. Springs account for height. My kit was level if not taller in front as you can see here

[@mdog9092]

Bigger tires bro

[@drew9407]

Aint no way hes running the blue tooth drive shaft 😂

[@Moe18889]

Was this installed with the leveling kit?

[@TheGscott]

No, @theliitleram I will take one today though!

[@ibdeer22]

How much was it

[@mattparks11]

Isaiah Bassett they are 850 from rough country

[@dillonwells5649]

my 5'' lift came with longer control arms, coils, shocks, sway bar links, track bar drop, break line drop brackets, for front. rear is a 5'' block with a leaf spring also a break line drop bracket. it just came in the mall yesterday and costed me $1400

[@LightsOutPredatorRemoval]

Mabey should get some tires.?

[@Nolabankz]

same reason if it was 2wd. the owner wanted it

[@Nolabankz]

can I do that setup on a 2wd

[@TheGscott]

Carlton Coleman does your two wheel drive have IFS, or a solid axle like this one???

[@Nolabankz]

Scott Tighe it's not the solid axle

[@dylanrose8340]

No need for front drive shaft or anything. haha

[@therealCodyCapps]

Dear lord rough country is selling a death trap of a kit. Never stack blocks. I wish they would stop selling this kit.

[@TheGscott]

Cody Capps seemed safe enough to me!

[@therealCodyCapps]

it seems safe at first bud but overtime the abuse can move that bottom block out and can cause major issues even death! me personally if I had the block kit I would have the blocks welded together. and then thread lock the u bolts. but if it's a pavement princess you could get away with it. but don't trust it.

[@mattparks11]

Stacking blocks isn’t safe at all bro you might wanna look into taking one out and leaving the other

[@TheGscott]

Matt Parks this is actually how it was designed. I'm not "stacking" blocks. One is the stock one that comes on a stock truck. The other is the designed block that is stacked with new u bolts and hardware intentionally designed to withstand the impact. I hauled horses and did tons of off-roading with this truck, and I never had any issues. Thanks for the thought.

[@dunnoyolo2238]

Not a big fan of blocks on reared

[@franklin29412]

bigger tires !!!

[@andersonwhite3568]

Yo bigger tires bro😂 it just looks silly

[@sebassramn7963]

4x4 or 4x4-2= No front drive shaft !!!!

[@AllMotorEddy]

Wheres the front driveshaft -____-

[@TheGscott]

AllMotorEddy hardware broke off, and at the time I was in the process of replacing it.

[@MidnightXAlchemy]

Those tires :/

[@mattparks11]

Geez man you need some tires

[@TheGscott]

Matt Parks this video was five years ago... it didn't look like this for long

[@bobcollins8202]

wroung bolts

[@DisgruntledFun]

Lol looks silly with the stock tires

[@2235whatever]

poor truck on stock wheels/tires =/

[@Broxty]

Ugliest dodges of all time, gaaahhhgg!

[@cjhowell3249]

did it come with a drop pitman arm and all that?