In this video I do a step by step kill switch install on the Rovan Baja 5B and Rovan FT360 platforms.
Пікірлер: 18
@GuitarGuys72993 жыл бұрын
Got my Rovan kill switch installed. I had the same engine kill button as you do so I just desoldered the wires off of the push button switch, cut two of the spade connectors off of the kill switch, shortened the wires a bit and soldered them on. It made the Installation much easier and more tidy. Gave it a test and it works great.
@Meyers2strokeRcgarage3 жыл бұрын
I take my engines in and out of my machine so very often and that soldering is not an option for me.
@chris-ip4pk Жыл бұрын
No need to notch casing,wires will fit behind casing,and piggyback spade connectors makes life even easier ,excellent video
@Meyers2strokeRcgarage Жыл бұрын
Thanks bro 👍🏼 I notched the plastic dressing because I like to use a grommet around the wiring to prevent chafing 😉
@wombatracing Жыл бұрын
Where did u put it into? Be good if we had a bird eye view of what u we’re doing cause I’m confused how to put it on
@Meyers2strokeRcgarage Жыл бұрын
It plugs into channel 3 on the receiver and after that it’s all about getting everything to fit in the battery box 😉
@amirnewson19053 жыл бұрын
Nice video brother Ben I bought that kill switch from rovan and never used it I got the killa 🐝 bee from killa rc but one question I have a fly wheel spacer from ddm and it says Zenoah spacer on it does it matter what spacer it is when using it for spacing the ignition switch
@Meyers2strokeRcgarage3 жыл бұрын
Thanks brother and thanks for watching!!! To answer your question I’m not familiar with the different kinds of spacers between different brands except for Redcat and Rovan. What I can tell you is you just want something solid to torque down on for a spacer and make sure your coil armatures line up with the magnets on the fly wheel. I have lost spacers before I have also mounted different coils as long as you get the fly wheel gap correct and the coil spacing corresponding with the fly wheel magnets correct you’re going to be good to go. 👊👊👊
@amirnewson19053 жыл бұрын
@@Meyers2strokeRcgarage thanks brother Ben I appreciate it
@Meyers2strokeRcgarage3 жыл бұрын
@@amirnewson1905 not a problem brother I’m always here to help.
@marklloyd35132 жыл бұрын
Hi mate I have a question I got the same kill switch off eBay $30 I'm Australian pay double for Rovan bits anyway my kill switch is connected in the number 3 on the receiver and it turns off then I do a right hand turn personally I've given up never ending problems. Be safe bro
@Meyers2strokeRcgarage2 жыл бұрын
That’s a weird situation brother it sounds like when you do a right hand turn it delivers power or ground to the Killswitch and kills the engine for some reason. I would think your problem would be in your transmitter and receiver
@marklloyd35132 жыл бұрын
@@Meyers2strokeRcgarage thanks for your advice
@operator56773 жыл бұрын
Damn I just paid $27 from Rovan 😳
@Meyers2strokeRcgarage3 жыл бұрын
I got mine off of eBay. I always try to shop around a lot of times you’ll find the same parts at totally different prices. Thanks for watching brother!!!
@operator56773 жыл бұрын
@@Meyers2strokeRcgarage lesson learned! Thank you for the video and will try my best to follow step by step coz this is my first gas 5B.. I appreciate what you do for us all 👊🏾
@Meyers2strokeRcgarage3 жыл бұрын
Thank you brother I try my best to help all the people in our hobby 😉
@operator56773 жыл бұрын
@@eastsiderc you are absolutely right bro, my quick cost saving brain wave activated prematurely. Thanks for snatching me back ✌🏾