Royal Enfield Interceptor 650 quick and cheap EVAP delete

[@PaulPriestley-o1q]

Best evap delete video on youtube. Many thanks

[@stevenlambert1895]

yes exactly what iv'e done, a simple plug and play solution for relocating the rectifier is buy a kit off james slick england (youtube channel) he makes wiring loom extension cables to move to either under oil cooler or under fork yoke

[@iantoy7778]

My next video I have done the reg/rec relocate my own way , worth a watch.

[@keesstam909]

You can also connect the two little pipes on the throttle bodies with lets say 15 cm tube

[@lampy541]

I did the same on himalayan by just blanking off solenoid on head and leaving it in place. Evap canister on that was solid as well.

[@ballisticsmeg]

Done exactly the same two years ago, plus I cut the evap in half used a hot air gun opened up the top to fill the gap as close to the swing arm as I could, now better than the original stopping road grime getting to the electrics, a nothing fix, and you get to see whats in the evap! Crap 👍

[@kevindarkstar]

On the overflow pipe location make sure it's not behind the rear tyre, as if it dumps fuel in front of the tyre it can turn it to jelly, obviously depends on how much it drops 😊

[@iantoy7778]

Just like it has done for the last 50 years

[@peacetoall3320]

simple sweet cheap just fantastic👌👌

[@stevecoppin4278]

Hi Ian Very Clever Fix

[@henriverheyen6190]

This video is sure to delight many Royal Enfield owners. Clever solution. 👍.

[@CosmikDebriis]

No Shield Beetles were harmed in the making of this video (hopefully). 10:22

[@TheSkeptic-lz2cc]

Don't confuse the "Green Movement" with "clean air for breathing". The former thinks any carbon (even CO2) released to the atmosphere will cause catastrophic climate change. IMO this is bonkers and definitely not settled science. However, it *is* settled that breathing hydrocarbons have negative effects on animals including humans. The tube you call 'overflow' that was connected to the charcoal canister is not intended for liquid fuel overflow. Rather it is just meant to route gasoline vapors from the fuel tank to the charcoal (to be subsequently and properly burned into harmless CO2 by the engine). The only way liquid gasoline can come through that hose and ruin the charcoal is if the tank is overfilled during refueling. Read the owner's manual for the proper refueling procedure (stop filling when the fuel level reaches the bottom of the anti splash plate, leaving sufficient air space in the tank for vapor expansion).

[@colinaston7332]

Great video Ian. A job I intend to do during the winter months as well as relocating the R&R unit. Seen a few videos about removing the EVap unit. Your way is by far the simplest and in my opinion the Best! Looking forward to seeing your idea of relocating the R&R unit Would be very interested to know more about that start button you’ve fitted under the carbs too?

[@LifetimeBiker]

Thank you Ian , Fantastic to be able to save a few quid whenever possible 👍 Like what you have done with the "GO" button. 👏

[@iantoy7778]

Thanks 👍

Good effort, mate - most interesting; I don't even own an Interceptor!

[@ogasi1798]

nice one

[@Trev350]

Very handy information Ian; nice one!

[@iantoy7778]

Thanks 👍

[@richardyardley5127]

Great video Ian and very informative as always. I'm seriously thinking about buying a low mileage Euro 4 Interceptor in the new year to add to my Classic 500 and Himalayan 411, so still very much of interest to me mate 🙂

[@iantoy7778]

If you buy a euro 4 try and get one ,2020 or older as there have been gear box problems after 2020 . Third gear is breaking there was a bad batch of gear that did not get hardened. If you go to look at one take the seat off and in the frame above the air box is the date of manufacture.

[@iantoy7778]

Good choice!

[@TheSkeptic-lz2cc]

Might be wise, if one is going to do this 'EVAP delete', to also convert the fuel tank cap into a venting cap. Drill one or two tiny holes in the cap so that any pressure that could build can be relieved. I have seen such set-ups without a venting cap, with an over-filled tank and parked in the sun, build up pressure such that a continuous stream of liquid gasoline is expelled onto the ground via the 'overflow' hose. Be careful not to smoke near this...

[@iantoy7778]

I don't smoke

[@andrewbull3537]

Ian ,great video 👍,were did you buy your handlebars and how much and did you change any cables ? Peace out ✌️

[@iantoy7778]

The handlebars are the Desert Sled bars from Ace Classics in London. I had to reroute the cables but managed to use the originals.

[@andrewbull3537]

@iantoy7778 ,thanks Ian 👍,will buy the same . Peace out ✌️

[@OleGade-h9m]

Hello Ian Great video you have made, do this in the spring as my SM650 is put away for the vinter😊keep the tips coming👍 Also for the Himi 411 - have one like you too to ride on all year🏍️ Keep riding

[@iantoy7778]

Thanks 👍

[@lesterhall5310]

Excellent video very informative and well explained ......Love those bars, What ae they and where did you get them if you don't mind me asking. Just what i am looking for for my interceptor, I want a more 1960s look. Great work, Cheers from Australia.

[@iantoy7778]

The bars are the Desert Sled bars from Ace Classics in London, UK

[@kevindarkstar]

19:59 what is the start button under the injection? 🤔

[@iantoy7778]

@@kevindarkstar IAM customizing my interceptor an have changed the bars and what wiring there is is run inside the handle bars, I want it to look as clean as possible. I have got ride of all the standard switch gear and fitted custom switch gear on the left hand side of the bars. And as you have seen I put the starter switch under the right hand throttle body cover. My business in the UK was building chopper's and custom bike's so this is pretty common.

[@Bob-oo7sm]

Love watching your videos.how would this work on a euro 5 bike .?I have the new Himalayan 450 .I wonder if the ecu has been programmed to detect euap delete .any ideas Ian ?

[@philiphillhill7076]

Hello from a first time Viewer. Very good i will be watching again. Errm maybe you could have folded the pipe over and Cable Tie it instead of cutting and chucking just easier to put back too standard 🤔 ... only asking for a Friend

[@damiantuttle1348]

Interesting...do the 500 and newer 350 Bullets have a similar EVAP system?

[@iantoy7778]

Yes the newer versions of the 500 and 350 Bullets do have a similar system

[@grumpopzijnmashfifty3109]

Keep the mufflers of .sounds good

[@Bob-xc2us]

If you are getting fumes out of the vent pipe the EVAP cannister is not working correctly or it is a bad design. Perhaps you are over filling the tank. That vent pipe should only let air into the cannister when the cannister is venting into the throttle bodies. There should be a check valve in the system to prevent fumes from escaping through that vent pipe and the charcoal cannister can store the fumes like it's supposed to. I understand why you are doing this mod but there are countries that have hefty fines for tampering with any of these systems. I wouldn't want anyone putting themselves in a compromising situation and would advise viewers to check local codes and regulations. Perhaps making the system work as it should would be advisable for some people.

[@johnfountain8588]

I don’t think he’s telling anyone to do this - just offering an opinion and showing what he’s doing to his bike - myself as an Interceptor owner appreciate the education and am quite capable of deciding whether to do this or not - lighten up and enjoy 🦩🦩

[@iantoy7778]

I understand what you are saying.But this is one of the problems for the engine cutting out . Also it up to everyone what they personally do to there own bikes. It like replacing the exhaust system the bike becomes illegal but load of people do it.

[@kevindarkstar]

How does it become illegal if the system or can is road legal? ​@@iantoy7778

[@roadstrom]

My new V-Strom has one it's under the seat near the taillight there's no history of these causing problems on the V-Stroms I'll probably leave it

[@iantoy7778]

Probably because your is under the seat so a lot higher

[@Chris-t8z2l]

I have a Vstrom and i removed the canister. Now i have a space to store some tools.

[@johnfountain8588]

Enjoyed the vid vlog Very informative and I’m sure a fix for those that need it 🦩🦩

[@iantoy7778]

Thanks 👍