RPM Stage 4 ZL1 Camaro! | RPM S8 E68

[@DIEmeROB]

I love that you can send a car to RPM. Then watch the car being built on the KZbin channel.

[@michigansoundwizard]

That's the sickest part of the company. Badass technicians and funny owner...lol

[@mikebauernfeind7024]

Yea , it’s fun to go back and watch even a yea later. S5 E31 about 13 minutes in. :)

[@noah_camaro]

I’d love to send my car there, honest work

[@TheDleight]

That's my Gray V Coupe! Love these videos, and it's amazing to see my car on here!

[@tylercouture216]

Hella fuckin cool

[@bradallan502]

Thank Christ for RPM videos these days. Even better we got some zl1 action going on. Thanks

[@orionfixr7713]

That ZL 1 is a beast !!

[@bradallan502]

@@orionfixr7713 they know how to build them

[@carpetmane3520]

There is no bullshit with RPM and the guys, you know they are true to the heart and down to earth. Love y’all

[@KalebKronic]

I rarely comment, but this is the only channel I have not missed an upload in at least a couple of years. Just pure gold every episode guys.

[@baby-sharkgto4902]

"I rarely comment" "Unless I think I can get something for free "

[@teedoemoto1]

It still blows my mind that this channel doesn't have at least a million subs... One of the best performance channels on KZbin, by far. Always rockin the RPM hoodie, but needs me a shirt! XXL, just in case you're wondering. 👍🏿👍🏿👍🏿

[@davep.1330]

Amongst Fran's sarcasm are extremely valid points! Love it!!!

[@edmundu]

Channel is awesome! I don't even own an LS and have referred people to you for tuning and services, because they will get the best tune and awesome mechanical install without the nonsense that a lot of shops put people through! Keep up the great work and when I go to the darkside you guys will be the 1st place I go to!

[@vppnbrent]

I am 70 yrs old and you guys make my Weds and Friday’s complete. Thanks.

[@chasereames2213]

vppnbrent “back in my day”

[@392Cherokee]

New sub... ❤️ the content and the high quality production that goes into them! That ZL1 was rowdy AF. Thanks to your episode with that Whipple Silverado we are putting one on ours. Although it has a 5.3 but has a Corsa catback....we are stoked for the install.

[@alexchadbourne]

My favorite part of your videos is being able to watch quality work be done. You guys are honest and will tell what to do and not to do with mods.

[@seanclancey5284]

That V, Coupe such a nice car. Can't wait to see Joey's car back up running. I see the Corona Virus, is not affecting businees your way keep up the good work boy's and videos..

[@MichaelBacon212]

Comment, Like and Been Subscribed!!!!!👍👍👍👍👍 keep up the great work guys.

[@RaceProvenMotorsports]

Email me your info and T-Shirt size to [e-mail] you won! Thanks for being subbed for 2+ Years and continuing to support us.

[@ryancottom6633]

I’ve been watching you guys for two years now. Love the content, love the builds, love the people! Keep it up!

[@Eastauckland92]

Loving watching all the videos while in 24/7 lockdown quarantined here in new zealand 🇳🇿 That’s for the entertainment 👏🏻

[@deadwabbit2287]

Never get tired of seeing that cam being pulled out and put back in satisfying !

[@shiftdowntv4511]

The content here is quality. Came for the cars, stayed for the lawlz. Great work!

[@scottsigmon926]

Guys, IMO, this is the best LS/LT KZbin channel I can find. Great content and very little BS.

[@tylercouture216]

It is

[@MrLilrell30]

I love when you all build the ZL1 cant wait to get mines

[@dannyoliveira4787]

I’m new to this channel I’ve become addicted to watching your videos. Awesome work love watching all your episodes. Just want give a shout out to all boys, Fran , Steve, Matt and everyone out there you guys kick ass. Great work.👍🏻💯

[@dcc415]

Currently saving for my ZL1 and when i get it these guys will be helping for sure...hell ya

[@famegarage]

Love watching/ listening to the vids when i'm at the shop working. Thank you for the content dudes.

[@jasonjames513]

My favorite KZbin channel, wish the videos were longer and more frequent...can’t get enough!

[@donaldwojtczak4049]

Love the vids guys! Plus the hilarious commentary makes it not only informative but funny at the same time. Seriously you guys help me get through this quarantine shit.

[@doodiehead9848]

You guys are the best!!! I learn so much from just watching how things are done.

[@mont7481]

Latest generation Whipple or Kong blower, which is a better platform for 2021 ZL1? Not sure if or when Whipple has started the production run for Chevy engines yet. Thank you for sharing these amazing and exciting videos

[@LosSS]

Love watching these videos Saturday/Sunday morning while I drive my coffee.

[@Vega_awk]

You do what with your coffee 😂😂😂

[@jeanfrancoisbergeron4716]

Loyal subscriber since season 2 , from Quebec city Canada , keep your good work R.P.M .

[@ruydobauch]

This is a fantastic channel. More people need to see their stuff!

[@andrewstout777]

I notice you guys use Advanced Induction for all your Z06 packages and other packages as well, but here recently I see alot of people going with Frankenstein heads (Joey, Frans ZR1, Frans racecar ect.) So which do you guys prefer, AI or Frankenstein?

[@LineMUp321]

Think it depends on the goal of the car. Like how they use McCloud clutches for under 600hp Vettes and Monster Tripples for above. I could be wrong though.

[@teddysmith192]

Im really a big fan of RPM they make big power with all there customers i have a 08TBSS i would love to have them work on my TBSS one day. Keep up the great work RPM

[@SeriouslyCool]

One can only wish these guys could provide enough content for daily uploads! Love ya work guys, Keep up the sarcasm lol

[@venom_motoring]

One of the best channels from a performance shop.

[@rublescube1]

I love the videos very informative you learn a lot about the mechanical aspect and tuning keep it up. The reason I would like that decibel meter is to give it to my eleven-year-old daughter and 13 year old son to experiment with and learn something new again thank you for the videos and the content

[@thekingscene]

The best performance content on KZbin I must say... 👍

[@2evol]

Great video!😀. Love the videos especially the dyno and install telling you how to properly do work.

[@jkheslekrants]

This ZL1.. is absolutely SICK!! Love 6th gen cars. Someday I'm hopin to send my 2016 SS to yall. I'd like to see 550rwhp NA. I also wanna get some RPM outta it though 6600 is soft

[@tylercouture216]

That would be sick all motor is the best way to go

[@idenalgiburi6639]

Met Eric at LsFest about two years ago and he was super cool! Super cool people and super cool shop! Hope I can bring my car there in the future :) keep up the good work

[@corypierce202]

It’s amazing how people bag on ported LT4 blowers when they put down numbers like this. Great video. Good stuff.

[@FirestarZX10101]

Love the channel guys. Planning on getting a c6z soon. Saw one of your builds at the Philly auto show. Yellow c6z making 800+whp. Gorgeous car. Keep up the good work!

[@jeromeadams5692]

Grew up riding quads and always wanted a Banshee. Twin cylinder two stroke screamer! Love the channel, keep pumpin out good shit...

[@dominickirkwood]

I love it my guys rpm keep up the work and I love the video and I love black zl1 and CTS-V lot 💯💯💯💯💯

[@matt1074]

Great channel. Im a Coyote guy 100% but there no ford shop channels like yours. Keep it up..

[@prohibitionnights4202]

You guys rock. Favorite shop to watch all

[@charlesbeans2398]

I’ve been watching this channel since way back in the previous shop👍🏼👍🏼👍🏼

[@charlesbeans2398]

Eric is the one that’s been working in the shop the longest lol

[@slekbekTA]

Best way to spend lunch break.. watch RPM

[@colleenvega9336]

You guys are amazing to watch. My husband and I watch your show a lot and enjoy 😊 it

[@rickyhoffmann8818]

We appreciate you guys getting us through quarantine. Thanks for the great videos

[@joeworley1065]

That is one sick ZL1 Camaro. Keep up the great work. Your videos are awesome.

[@TxHammer757]

Awesome Camaro ZL1 ...you guys know exactly what to do...great videos

[@cozdude3354]

That ZL1 screams!!! Badass build guys!

[@joshmurphy1463]

Made some awesome power guys! I’m actually think about sending my V2 to you guys to put a cam and ported blower maybe

[@zachyd94]

This shop is what dreams are made of! I love it!

[@LUKEg612]

Always happy when a new episode drops!

[@kmaark1551]

Just curious, do these LT4’s do better with a stock upper or like a 2.75 upper? I remember the white c7 z06 made simular #’s with a different upper...

[@ernestquinones7967]

I love watching your videos during this quarantine period. Plus the cars you work on is on my dream list.

[@themiaxsniper]

Love the videos always cool to see the cars built then dyno tuned

[@Stan1le]

Very similar setup on the ZL1 to what I’m trying to build! Love it!

[@ahmedhamzah5780]

I love RaceProvenMotorsport ... love you all guys .

[@rickg1984]

love what you guys do I have seen more cts-v s on your dyno then are in my whole country keep up the great work

[@MrLeeCamaro]

If I were closer I'd definitely visit the shop and get tuning done. Looking forward to more.

[@MrRandradez28]

Can't wait for my FED M311 heads to arrive!!! They look beautiful and can't wait for results on that Kong 2650 V2!!!

[@DarkKnight-ws3wx]

Great vid!!!! Nobody is messing with the RPM crew👏👏👏👏👏

[@rafatrill]

This channel, John Doc's channel, and Cleetus's channel, are the best on youtube hands down. I wear a XL lol

[@DailyVetteLife]

Always a better day when a new RPM video is uploaded. Keep them coming.

[@jrvmosjr]

Nice work! I want to bring my Texas 2017 Camaro SS to you guys! Thanks for keeping me entertained during covid stay at home.

[@ahmedal-mawlani5284]

The zl1 numbers are pretty impressive, it will be a fun car to drive for sure good job guys.

[@larrynewberry3500]

That ZL1 has some great numbers. Great build. Whatever happened to the 2019 ZR1. Can't wait to see too see both of Frans cars get ready for the season. Need these video's during all this Covid. Best part of the day. 🇺🇸😁👍

[@dekta777]

I mean I have no clue what I would use a the meter thing for but could sure use the batteries. Keep up the awesome content guys!

[@georgem.6136]

Joey's car is going to fly, those heads are bad ass! The Banshee is super clean, love those things! Don't see them to often in that condition. Also i didn't know people actually convert them into drag race machines.

[@johnc1540]

Your videos are the best. When I’m ready to build my c7 z06. It’s coming down to you guys.

[@Gr33nShirt]

That thing is crazy loud. Do that many customers opt for quiet setups with electric cutouts for track/Mexico?

[@vincedidonato9300]

Keep up the great content! Always look forward to watching your videos

[@josemateos2774]

King of cams with that shot 📸🤘🤘

[@Brad_James]

Thanks Matt for taking it easy on those cam bearings, I would hate to see everyone get pissed of again!!! 🤣🤣🤣

[@aumetalmental8403]

Another great video guys. Anticipating the finish of Joey's Cadillac. Really looking forward to Fran's engine build videos. 😎✌

[@bigbird21313]

YOU GUYS ARE AWESOME...LOVE TO WATCH WITH MY FAMILY...KEEP UP THE GOOD JOB ...PS FROM CALIFORNIA

[@jasonbuck1968]

Great job putting the video together!

[@Drokkers]

ERIC IS ALIVE AND WELL! On second thought he's alive as I don't think he's ever been well

[@Johnny-ox1sc]

You guys are great! Love to hear the rpm power scream!

[@disinferno06]

When you're showing some of the block installs could you show what it would look like if the car "lifted a head". Like point to the area and show what would be different.

[@adammorales2192]

Ohhh it’s so slippery.... You’re just teasing it, lol love y’all videos . The content is all top notch!

[@ARMANDITOLEXUS]

I used to have Banshees and Raptors for sale at all time, Those 350 two strokes are fast as hell!!

[@tedmullins996]

All the people not subscribed are either mustang owners or guys with edelbrock blown cars making less than N/A power!!! Keep up the great videos guys!

[@rynev3392]

I’ll take the decibel meter, I’d use it to calibrate the individual speaker channels on my surround sound system

[@rlarson315]

I think the old meter was set to Sarcasm instead of Decibel. That's why it was always maxed out.

[@jeffreyharris8407]

love the videos, helps me get threw my slow work load for the days lately, i would love a xl t shirt to rock here in virginia , thanks guys for the videos

[@zacholson3780]

Washington state subscriber over here. Keep up the great content!

[@spdkilz9997]

same! lake stevens

[@unclemel8276]

Same, Bonneylake

[@danielkerr9950]

really enjoying the content, I love blowers, I have an LS2 powered HSV GTS with a Harrop 2300 blower cam exhaust and clutch makes 608hp to the tyre, love to drive it!! have you guys ever used harrop blowers,

[@juangarza9520]

Got a question for you guys, I read a lot of articles and always get mixed answers on this issue. Why size tire fits on the back of a 2017 SS with out rubbing. I have a 20x11 rohana wheel with a 295/35/20 and when I hit bumps they rub on the fenders and since you guys are all about corvettes and Camaros why not ask the experts

[@Coda734]

Gonna go out on a limb here and just say I totally thought I was subscribed for the last 2 years or so. Turns out, all of your videos just show up on my home page as recommendations because I've watched so many.

[@Kinthenarcslayer]

Bout to purchase a z06 because of you guys! =)

[@ShelbyZ2910]

Yell are awesome. And what a gentleman including batteries 👏 🤣🤣🤣

[@mikecrevier4686]

That's a clean banshees boys, are you building a grudge bike or just some fun with the boys, a few hops up and some T5 pipes etc, will make that wheeler sing, cheers to Fran

[@theprodigalson2904]

Even tho I'm a mopar guy I cant help but love watching your vids I'm impressed with the ctsv which is a dream car, keep up the good work and I bet the decibel fir that zl1 is 141 db

[@tylercouture216]

Just be a all car guy no point of being just a "Mopar Guy"

[@mikebauernfeind7024]

No thanks on the 115 DB pos but I’d love another t shirt. The original T gets ( well got for the time being ) lots of comments in Venice , Prague, Rome and Madrid . Yesterday I took my teenage daughter out for a nice 100 mile drive on a 93 degree day here in central Fl. Your awesome work on my C7 ZO 6 makes it so much fun ! She always asks to go for a drive and impatiently waits for the oil to hit 160 degrees lol.

[@stevedean8529]

When you add E to a car, are you using pump E (Flex Fuel) or are you using VP's E85R (something similar)?

[@xXDjBumBuCLaTXx]

Its the same thing lol

[@nationalconsensus5106]

that's a way to go Joe right there. Thanks Joe and all you guys!

[@christiansouthard5677]

Love the videos. Have a c6 zr1 head cam ported blower. Would love to possible get it out to you guys one day.

[@darkcloud3662]

I need help with new engine I am building for my truck. lq4 punched out to 4.030" with stock crank. Running 243 heads and tbss intake. Basically an iron ls2. Wondering if 8.1 truck injectors would be enough or do I need more injector.