2015+ Dodge Charger RGBW DRL LED Boards Diode Dynamics Installation by ModFX

[@texmextu2]

See what I like to do is just drop it off and pick it up in a day or 2...

[@johnnygt6039]

I'd be so worried about condensation! It looks good though!

[@compilation8800]

How much will cost?

[@desmondbrown3548]

I commend them on their patience. I would have said to hell with all that. Looks good though man.

[@RS7evenSLDR]

love the look. Just seems to be asking for condensation in the headlights however far down the road. I had a bad experience with a headlight mod before requiring disassembly and reassemble

[@nandort5901]

That turned out looking fantastic my friend!

[@staggeredhorizons3657]

these lights look so good. especially color matched to your car

[@mc996cars1]

Looks great man! I just hope you don't get condensation in those headlights! keep up the good work!

[@ecoatticsystems]

I’m going to an issue which is, the headlights won’t turn off at all, drains battery at the end. I looked at the connections and it looks like it got wet because of rain, how can this be fixed?

[@Mr_GQ34]

Having to do all that, I would've said to hell with it. The stock white DRL still look clean to me. But nice ride homey.

[@x7stringinJSCx]

Those are crazy lights. I wouldn't be using those on the highway though.. Might cause trouble for you. They would be fun to see sitting at a car show.

[@ayetriz]

is it possible to have these wired to where they come on when the vehicle is turned on like the factory ones but also have them work when the car is off?

[@derrickrobinson1444]

hey RP how you think you gone keep the scatpack they suppose to be doing the body over in 2019 l. but you the reason I won't one

[@chezar147]

It may seem like a stupid question but do your lights work without the car having to be on? Also, what fuse did you use for the positive?

[@brianasf4005]

what did he use to seal the part where he routed the wires out of the hole in the headlight?

[@koompa100]

Did the lights ever seal properly again

[@REDZ28won]

If those headlamps hold water or excessive mositure they will not be under warranty. But its a cool looking mod when done.

[@windycitywarrior71]

I agree it looks awesome, but personally i would never open those lights. Odds are they will eventually retain moisture. Plus I don't like taking the front end of my apart to get to them. Just me though.

[@REDZ28won]

Ya I hate taking the front facia's off to change a headlamp assembly. But its not that hard, just worry about scratching the customers car and fitment afterwards.

[@DownSouthKustomsTX]

for the way they were sealed... that lens will start eating away soon

[@jeepGladheateher]

think they could get something set up for the new body chrysler 200

[@lifeofmoneybaggmat1292]

Like the new lights on the Scat. Pretty cool

[@hugomondragong2865]

how much do they charge you for installation ???

[@SD-fg8rb]

how much did it costs for the installation?

[@flowmagic5]

how much did you paid for everything? the light and the installation

[@kenbro9]

hey bro. im gonna be purchasing a new charger R/T in few months. is it possible to swap out the R/T front n rear bumpers for SRT bumpers. they should fit no problems right? and is modfx located in california?

[@jacobwilliams5579]

no the r/t and srt have different fog lights. you would probably have to get new fog lights also

[@kenbro9]

+Jacob Williams thanks for info.. iv decided im getting scat pack.. eff all the R/T. if imma get something i want. its gonna be right!

[@Isla.Noelle3]

Why not replace the projector while you're in there? The visibility on the stock projector is so bad!

[@evillest_3928]

I noticed you wired the remote to the battery instead of the recommended DRL light wire. Did this affect anything? Like were you able to turn on the lights with the car off?

[@Roger-zp1cr]

TONESKEEE yeah im having that issue idk why ..my drl dont turn on when the car is off

[@AliAli-tf4re]

All those are for 160$ without remote right??

[@KingFLA]

yea. definitely gettin these on mine. and definitely paying to get em installed. lol. im prone to breaking shit. lol.

[@johnmichael9354]

How much did it cost for installation

[@JocJr]

Hey Riley, I have a '14 Dodge Charger R/T and I'm thinking of getting spider headlights but I'm not sure if they're safe and there are so many for sale online for different prices, I don't know what's legit. Can you help me?

[@RPProductions]

I've seen many builds on Instagram run them and they look really good! I would assume you'll be fine with them but I've never tried them!

[@dylanmardis1420]

+RP Productions how much did the install cost you.

[@bryceowen]

Are you able to turn them on even when the headlights are on?

[@RPProductions]

Yep! The way these are wired I can turn them on/off whenever I want! So during normal driving they remain white just like factory.

[@YoutubeNonaBudget]

Did it take 6-8 weeks to come in ????

[@RPProductions]

Sadly, yes. About 6 weeks!

[@YoutubeNonaBudget]

+RP Productions that's a really loooong time, I bet you forgot it was even coming. 😂😂😂😂

[@RPProductions]

Haha no I was just anxiously waiting the entire time!

[@YoutubeNonaBudget]

+RP Productions thanks for the input in going go ahead and order it today and let modfx install it also.

[@RPProductions]

Badass man! Tell em I sent ya!

[@quantum3406]

That's a huge process I simply don't have time for

[@gdogmatt]

I have the same setup but took it a bit further.

[@Chris-sr6hs]

I have a 2016 tor red charger scat pack. how much did it cost?

[@SladerRoberts]

It will probably run you 300 or 400 bucks.

[@jeru333]

How much for installation only.

[@ejminohanian]

How much did the installation cost

[@stefbro]

this is a bit of a late comment but I got oracle headlights for my hellcat and I was wondering how much you paid for labor thanks

[@RPProductions]

Labor is generally between $300 and $500 just depending where you get it done.

[@stefbro]

Thanks bro

[@mohammadomarmohd]

Does it affect warranty?

[@gorilla99]

How long did the installation take? Price on labor?

[@RPProductions]

5 hours. Price will vary on your specific application!

[@RCGrid]

Cracking headlights open is a pita

[@garysgarage9827]

Where did you get your mopar shirt?

[@RPProductions]

www.wearmopar.com/wear-mopar/itemdetail.htm?item=A69452442

[@garysgarage9827]

+RP Productions ok cool, thanks.

[@j.christiann5650]

Great vid man!

[@imcisco__1505]

I need a modfx shop in AZ

[@Mike060504]

Soooooo sick! Now you just need HIDs

[@MrChucky2328]

wish it was more simple install,would’ve bought it a long time ago

[@youknowwhyimhere2307]

How much this cost?

[@tdcptony]

How much did they charge to install ?

[@supererick128]

tdcptony like 100-300$ seems like hard work

[@tdcptony]

+supererick128 They price quoted me $600 so idid it myself & it came out great .

[@supererick128]

tdcptony I thought you meant labor man my bad hahah cuz the kit is around 300 right?

[@2quick524]

supererick128 165 on diode dynamics website. for the install in 350

[@sunnyb707]

did you tap into the harness or what

[@deathuponusalll]

Nice! I’ll pay them a visit

[@ilcoolj12]

Looks great brother!!!!

[@crank804]

My SCAT didn't come with HIDs. Im planning to buy LEDs, what are the correct bulb size to shop for? I've seen HIR2, 9012, 9006, 9005.

[@RPProductions]

Looks like 9012 but I'm not 100% sure.

[@cornelldaniel]

hid is much more brighter... my 300 came with the LEDs, trust me hids are way more brighter. get 8k

[@crank804]

+Cornell Daniel kool, yeah I rolled with 6K 55w HIDs.. dopeness

[@SVGZ06]

What made you go with the Diode Dynamic setup? Is it better than the Oracle Halo Kit?

[@RPProductions]

I was told by several people the DD kit has far less problems and the white on the Oracle kit isn't a pure white.

[@SVGZ06]

Ok gotcha. Im looking into getting a kit soon

[@KennIsTaken]

tbh i prefer the normal stuck white led lights

[@declaratedvet]

Wow I'm scared no way I could do this.... Lmao I would seal the housing up and then realize that I installed it incorrectly

[@klm2fm4]

What part of Texas?

[@RPProductions]

Houston!

[@NoctuleBat]

+RP Productions I live in Houston also,but have a 15' GT (got GT instead or a ScatPack due to aftermarket), how much did they charge you for install?

[@RPProductions]

It was a different price for me since I did the video guide stuff. Each car is different it just depends on what exactly you need done! Contact Jose and tell him you saw this video and see what price and can do for you!

[@NoctuleBat]

***** Alright Thanks! Are you apart of SpaceCityLX? Thats the Mopar group in Houston, They have a facebook page and meet up from time to time. I have a freind with a red 15' Challenger ScatPack with the Matte Black Hellcat hood.

[@RPProductions]

Bat5.0 Yessir I am! I think I know exactly who you're talking about! He's got tire letters that say NITTO?

[@chuckscatpackredline340]

Looks very labor intensive but nice

[@MarceloBrozovic-i8x]

اويلي بس حلمي تشارجر❤️❤️💔

[@qusaycar5911]

Alz a7f اني هم😢

[@vincentntammy]

My light kit should be here today.... fuck that looks too complicated was gonna do it in my garage tonight but fuck that lol just get it done professionally that way I know it's done right

[@connordenisar8770]

Haha dude keep up the great work I love the vids and your car omg

[@Scotty_in_Ohio]

Neat but careful running red or blue as the police look for this mod now a dark purple shouldn't be an issue....

[@ahernandez8297]

Drive around Houston all day i have yet to spot you

[@serg10g61]

Your car is dope

[@Jamminmotorking]

Seems like too much work. Hell no!

[@jordanhicks2774]

I would rather let them do than me, I know I would mess everything up😬😬😬😂😂

[@Mattxhernandez]

Its not that bad😂i did it with lighting trendz myself and it was only stressful when taking the headlight cover off after i put it in the oven😬 besides that was simple

[@waynewiggins9923]

Awesome videos! Just got my Scat Pack in Black this a weekend. It is an awesome car! I was wondering what type of emergency bag you had in your trunk. It looks handy.

[@RPProductions]

It's a simple tool kit I bought at Walmart a few years ago and I've just filled it up with random tools over the years!

[@waynewiggins9923]

Ok, I liked the way it tied into the cargo hook. Love the videos and my new Scat Pack! What a car for the money. I appreciated your videos during the 7 weeks I had to wait for it to come in. They really helped me while waiting.

[@Mustafadroid]

man bro your car look sick I am to do that to my too

[@R3N1R3N]

I'll pass on all that. I'll just put a nice truck LED light bar in the bottom part of the grill, for better illumination and call it a day

[@DownSouthKustomsTX]

Good video, but man this is why you don't go to a stereo shop for lighting....your gonna regret that in a year or so if not sooner, silicone is the worse thing to seal a light with bud, could have been done much better

[@RPProductions]

They're not just a stereo shop. They do just about everything aftermarket for these cars and have yet to have one of these setups come back with any issues.

[@DownSouthKustomsTX]

give it time, if silicone was used in the channel is will gas out the internal of the lens and eat it away. It looks great though, not trying to start anything, just a bad place for lighting is all. 99% of the repairs we have to make are from audio shops or one stop shops, weather it's hid related, or halo related etc

[@RPProductions]

The largest Mopar club in Houston (Space City LX) all use Modfx as their go-to shop for lighting mods. They've been doing this stuff for many years. I'm sure if the stuff they used to seal up the lights caused problems they would have figured it out by now. I suppose time will tell but I'm confident in them.

[@Loco16823]

Chad Hawkins so where should we get them installed at ? I thought audio place or one stop were good since they do more wiring than a regular mechanic.

[@MrShabindigo]

"Remove bumper and light casing".... Inner Dialogue: *"This doesn't seem TOO hard...I think I can do this! 😃"*.... "Use heat gun to melt glue and break lights apart OR put them in oven..." Inner Dialogue: *".....😳😖🤐 Ya know...my current lights are fine, I think..."*

[@LoveLife-ku7pt]

Damn bro u could have showed how it works and different features after installing come on man step it up

[@AndresGonzalez-zy4up]

So dope

[@A42yearoldARAB]

It's like a grand worth of labor or close to :/

[@dantheman9569]

Serious?

[@RB25luv]

Nice but oem is better to much purple.....but nice car

[@RPProductions]

White is still available! Hence the RGBW.

[@crazycuzthe1]

good video

[@DresdonAcacinTheOriginal]

Great video dude, sub'd

[@karimramez7272]

Why the charger instead of the challenger

[@maresking22]

He has a video explaining why he chose the charger over the challenger

[@kevinfrmkdz]

+That1girlXD no theyre not more expensive and no theyre not faster, the cars are both basically evenly matched.

[@TheSamMabe]

That's not true at all. I have a 2015 challenger and just ordered a scatpack charger. The charger is more expensive.

[@TheSamMabe]

Bingo.

[@kevinfrmkdz]

***** Why would I need to research a car I own that I bought because it was basically the same price... notice the key word, "basically" as in not exactly, im agreeing with you about it being "a tad faster"

[@Deadpoolmasterchief]

Dodged break so muck they need MOPARTS

[@ThisCantBeReal1]

I love it, but at the 4 minute mark I'm like, F&ck that. Nice though

[@Nfamous_707]

Zero help. The wiring is going to be the area where people are going to need or being looking for help/guidance.. and you basically skipped that part. If you're going to take the time to make a informative video like this you need to take the time and explain each step as if the person watching has ZERO clue what to do. Soder here.. connect to this.. do that.. isnt helpful at all.

[@dingdongchingchong8659]

The Thanos Car

[@Boosted_zay]

weight reduction bro

[@DogStarr777]

Really?

[@Izzyrpg]

" Pretty self-explanatory " is this your favorite word shit that could get really annoying

[@jaylinford9560]

It is so much easier and simple in a challenger😭😭

[@King_VQ]

Fuck this. I thought it was a plug and play kit. I'll pass.

[@christianpena8648]

It looks mean 😈

[@R3N1R3N]

oh my damn, what a pain in the ass

[@living4christ]

What big pain in the ass this would be to do.

[@miguelelite21]

I was wondering I think you mentioned being from Houston..we have a mopar group we would love to have you in our group..we are called mopar empire check is out on instagram and facebook @moparempire just letting you know

[@DANTEISZCOO]

Haha called it in old vid

[@duckinatree]

Rename video to: look what I did, no instructions, so do your own research!

[@Deke1]

That's the definition of TACKY!!

[@justyngarza9167]

H-town supporter

[@cstrng12]

Yikes. No thanks on that lmao

[@tundrawhisperer4821]

Holy Shit, no thanks! 😂😂😂

[@حيدركيانحيدركيان]

اني أحب جرجر روعة حلوا

[@moose5.9]

1st view and comment. cheahhh

[@Fqd.]

everyone saying that they wouldnt do this and that its complicated people all you have to do is buy the prebuilt ones and then take them to a shop to get them put in the car yes it cost more than doing it this way but its saving a hell of alot of stress 😭

[@nandort5901]

That turned out looking fantastic my friend!