RS 660 | Chain & Sprocket Install | Part 1

How to change the stock chain and sprocket on the RS 660, with D.I.D 520VX3 Chain and Superlite 47T Aluminum Sprocket
This is Part 1 video of the installation. Part 2 includes comparing before and after top speed numbers, and review on results. • RS 660 | Chain & Sproc...
Like and Subscribe for more videos.
Music: Pixabay.com / Vladislav_Kurnikov / Coma-Media
Disclaimer: I am not a mechanic. You are viewing the materials and using the information contained in this video at your sole risk.

[@EtaParseids]

Love your videos. Living vicariously through your content until I save up for my RS660. Attention to detail. Calm, meticulous and smooth explanations. Hope your channel gets the attention it deserves.

[@ALFAVITAGA]

Thank you brother I appreciate that! The channel is new and we’ll see how it goes. The RS660 is a fairly new bike and the audience still limited. Initially my focus will be on the RS660 and potentially I will expand my content. All in good time. Hope you get your RS660 quick ✌️

[@vendy4625]

Again another very detailed installation guide Mike the gold looks spot on 👌

[@ALFAVITAGA]

Thank you so much brother! ✌️

[@ElCanalDeNe0]

Thank you very much for your vídeos, very usefull for RS660 owners. Thanks!!

[@ALFAVITAGA]

I appreciate that brother! ✌️

[@user-challbad]

That gold chain looks awesome!

[@ALFAVITAGA]

Indeed it does my friend! 👌

[@ianjoe9909]

Tremendo el video, lo explicas con mucha calma, saludos 👍

[@ALFAVITAGA]

Thank you! I appreciate that. ✌️

[@simomestreborras8887]

Nice work bro, I have a rs 660 my own and it's cool to see your mods and everything. :D It would be good if in the description of the video you were putting a list with all the parts and spare parts that you have been using and that you have installed on the motorcycle right now.

[@ALFAVITAGA]

Thanks brother! That’s a good idea. I will go over my videos and include the parts in the description. Once I complete all the mods I will make a dedicated walk-around video with all the mods.

[@simomestreborras8887]

@@ALFAVITAGA Oooh nice to hear that you liked the idea. It will be a good video the walk-around. Regards bro!

[@hddanman7263]

Also wanted to ask, so do you have to do anything with the rear brake calipers or ABS sensor or just remove it really carefully I was gonna try and remove the brake caliper, but I have no idea how to handle the ABS sensor thank you

[@ALFAVITAGA]

@@hddanman7263 You don’t have to remove the rear brake caliper or ABS sensor. Just remove it carefully and you should be fine. ✌️

[@hddanman7263]

@@ALFAVITAGA thank you so much 💪

[@ALFAVITAGA]

@@hddanman7263 💪✌️

[@hddanman7263]

Hi, maybe I missed it but what size socket are you using to get the rear axle off? Thank you

[@ALFAVITAGA]

@@hddanman7263 26mm Hex

[@hddanman7263]

@@ALFAVITAGA thank you yeah me and a friend got the wheels off now all we have to do is put it back on🤞🏼🤞🏼

[@ALFAVITAGA]

@@hddanman7263 Awesome! ✌️

[@hddanman7263]

@@ALFAVITAGA we finally got it done. Thank you so much for your videos. They’re really helpful.

[@ALFAVITAGA]

@@hddanman7263 Amazing! Happy riding 💪

[@irontigerfpv4388]

Not sure of this has been asked before, does changing the chain, changing sprokets going to improve a Stock Rs660 without any Other additional mods?Thanks

[@ALFAVITAGA]

Short answer, yes it will. The RS660 runs a lot smoother on 17/47 gearing. By changing gearing, you will improve the acceleration and overall feeling. The only time I don’t recommend this gearing set up, is if the bike is used to commute on the freeway a lot. Other than that, gearing would have been one of the first mods I would do before anything else.

[@hddanman7263]

Hi, I have a Evotech spools and my friends venom motorcycle stand will not adjust to fit it. Do you have any recommendations?

[@hddanman7263]

What spools do you have??

[@ALFAVITAGA]

If the stand is not adjustable there is really no recommendation. Its a matter of luck if you will find spools that would match the opening of your stand. And for the most part all spools will give you roughly the same distance. Nevertheless, the spools I have are by Driven Racing.

[@felixd4015]

great content! love it! just wondering is there any down side if you remove the chain protection piece? thx

[@ALFAVITAGA]

Interestingly I was thinking the same thing. I want to remove it but I’m scared I might get too much chain grease splatter. I might go for it though.

[@shakeymoto4532]

Thanks for this info I'm looking to do the same on mine but not sure on sprocket size. Did you feel a big difference in how it rode?

[@ALFAVITAGA]

I haven’t ridden it yet. I’m about to go out now and run some tests, record and upload a video review within the next week.

[@EdPalafox]

Mike, do you have a link for those titanium bolts for the sprocket? TIA!

[@ALFAVITAGA]

These are the ones, but I didn’t get them through AF1 as they didn’t have gold. I think I got them directly from Probolt website. www.af1racing.com/pb-ti5spn10d-pro-bolt-titanium-rear-sprocket-nut-set-pb-ti5spn10d

[@EdPalafox]

Thanks, buddy, That's too much gold for me. How you liking that RSV4? @@ALFAVITAGA

[@ALFAVITAGA]

@@EdPalafox I love it brother! It’s a different game compared to the RS660. ✌️

[@UpsideDownFork]

Are you happy with the VX3 chain?

[@ALFAVITAGA]

It’s a great chain. No issues!

[@UpsideDownFork]

@@ALFAVITAGA thanks for the reply!

[@rodrigomirones4117]

where did you get your rider seat bro? or did it come with the bike?

[@ALFAVITAGA]

It’s a custom seat made by Luimoto ✌️

[@BONTHEBLOCK]

Έδειξε το μηχανάκι Με την χρυσή αλυσίδα 👌🏽. Τι τελική είχες πριν , σε σύγκριση με τώρα ?

[@ALFAVITAGA]

Πολύ ποιο όμορφο! Δεν το πήγα βόλτα ακόμα. Φεύγω σε μία ώρα να πάω να το τεστάρω.

[@BONTHEBLOCK]

@@ALFAVITAGA περιμένουμε βίντεο 👌🏽

[@elaniejimenez159]

You need a kick ass intro bro👍🏾 lol

[@ALFAVITAGA]

Lol Ill make one 😛✌️

[@Notoxic30]

Can you provide link to the sprocket? I cant find it..

[@ALFAVITAGA]

I got both the sprocket and chain from sprocketcenter.com It was the only place I could find a Superlite rear sprocket at 47 teeth.

[@TheSchnittbrot]

will you do a video on how to do the safety wire?

[@ALFAVITAGA]

Yes, thats the plan!

[@stefanosimonetti927]

Wooow!! Did 520 110 shirts ?

[@ALFAVITAGA]

DID 520, 112 links to compensate for the 47T rear sprocket.

[@Tiag_90]

220 in fifth? :O

[@ALFAVITAGA]

227 in fifth 😉

[@Tiag_90]

@@ALFAVITAGA pls tell me how i Need it

[@ALFAVITAGA]

@@Tiag_90 I will upload a video with full review!

[@Tiag_90]

@@ALFAVITAGA please do, the bike it's Amazing but full stock It Just feels like they took away some Power from It to make It more "street oriented"

[@ALFAVITAGA]

@@Tiag_90 Yes, I’m hoping that with the sprocket the bike will fly.

[@migueljorge8105]

Mal hecho los tensores de la cadena hay enroscarlos completo colocar la cadena cortarla y después tensar trabajo mal echo😮

[@ALFAVITAGA]

Nothing was badly done. Thanks for stopping by ✌️

[@toppergang]

TERRIFIC JOB !!!!!!!!!!!!!!!!!!

[@ALFAVITAGA]

Thank you I appreciate that! ✌️

[@ImNoTourist]

Dude nice vid but I do recommend knee pads. I was young once and did what you do.... trust me, get knee pads, you will thank me in 15 years.....

[@ALFAVITAGA]

@@ImNoTourist 3 herniated discs. Trust me I know what you’re talking about. I’ll consider the knee pads 👌✌️