RTSP for Wyze Cam v3 Download and Install [ Watch Me Doing it... ]

[@IamPoe]

Hi was just wondering will this work on the Wyze cam V3 Pro? thx

[@lawdawg1942]

Just bought a new wyze cam, updated all the firmware only to realize i can't stream from a computer webpage with out paying. Found the RSTP instructions but when i put the SD card in with the firmware and hold the button down it does not turn purple. Wonder if the newest firmware has changed something.

[@SmartDevicesChannel]

I had this problem once when trying to install the RTSP firmware, I had to use another SD card with less capacity (storage) for the new firmware. Try that and follow the instructions here step-by-step. I hope this helps.

[@lawdawg1942]

@@SmartDevicesChannel You are correct. I found a old 2 gig card and it was fine. My 128 didn't work. Probably needs a SD and not a HC or XC card. Thx

[@QAnog]

Ahh! Maybe this will work for me too. @@SmartDevicesChannel

[@Corn-ped]

@@lawdawg1942 Thank you! this was my same issue!

[@dundeepolice991]

Question. RSTP is needed to view two wyze cams on two solo monitors....(correct) ?

[@squidskunk]

will this work on the roku cameras..?

[@LamGorYun]

can you still use wyze cloud services?

[@tpp27]

would this work on WYZE Cam v3 Pro?

[@QAnog]

This is not working for me as of February 2024. Any thoughts? I am using a 128GB SanDisk ImageMate PRO microSDXC UHS-I Card. I have the .bin file by itself on the root of the card. I hold down the setup button, and continue to hold it while I plug in the camera. The light will be red, then it will begin to flash red, and the camera will say "Ready to connect." Sometimes there will be a brief moment where the blue LED flashes one time before the red flashing LED and the "connect" audio plays.

[@SmartDevicesChannel]

Sometimes it happens, I had this problem before and I used another SD card and it worked. Please try.

[@QAnog]

@@SmartDevicesChannel Yes the different card worked. It was also 128GB SanDisk, but a different kind. I had to reformat it for each camera I set up with it though. It was like it broke after every use. In the end I got the first four cameras working. Now I will get more for sure.

[@chkid]

I'm using WYZE Cam v1 and what is the delay of the screen in v3 in RTSP? Can you measure the delay? If the delay has improved, I think it will be helpful when I buy it.

[@wavywolfgang81]

does this work with the wyze cam pan v3 ?

[@Crickle12]

Do you need a cam plus subscription for RTSP to function?

[@SmartDevicesChannel]

No

[@manputty4u]

if the camera has Wi-Fi why cant it load its own update

[@NhatzHumbleOpinion]

nine just goes directly to "ready to connect"

[@SmartDevicesChannel]

Use a different SD card (That happened to me once and using another card solved the problem).