Thanks for the tip with the two by four for the rear shackle. Was having of heck of a time getting it to line up
@JoJoGator9 жыл бұрын
great tip with the wrench to pull out the bolt i use the same method on stubborn bolts its also makes it way easier if you saturate the bolt shaft with PB blaster so it spins easier. Great Video dude cant wait to watch the next one.
@welivejeep30549 жыл бұрын
You should put anti seize on the non threaded part of the bolt too. so that it won't seize up in the bushing sleeve.
@nickmartin70245 жыл бұрын
Had some of that today !!
@LZDEN8 жыл бұрын
i agree with the comment below..you should have greased all of the bolt..threads and shank it will pay you dividends if you ever need to remove the bolts in the future...good video.
@northwesthappz50334 жыл бұрын
I have a 99 jeep xj with a 4.5 inch lift I need new leaf springs what size do you recommend? I have 1-2" drop shekels
@rachelbowen23534 жыл бұрын
Ten seconds in and i know its a good video.
@stanlouis4589 жыл бұрын
Nice bate and switch vid. Nothing to do with the pick you show, good thing for fast forward didn't have to see all it.
@yahiride75782 жыл бұрын
What wheels are those??
@welivejeep30549 жыл бұрын
Those rims look a little wide for those tires lol
@gorillacookies34518 жыл бұрын
"Sway bars don't make sense with leaf springs , I don't know what jeep was thinking " .......Well you can bet your silly a.. they are there for driveability and safety If the factory went through the added expense of installing them. Any dime auto manufactures can transfer to profit by cost savings they certainly will. Just a bit of experience and common sense may help here . I'm under the impression they were probably there for a reason. In fact a very good reason . I'm inclined to believe they were added due to the soft nature and flex associated with the factory YJ springs remove them from a stock YJ and go for a spin lol
@RedZAgs1936 жыл бұрын
Leaf springs don't flex a single section of the car like a coil spring does. Having a sway bar on leaf springs is a check in the box for auto manufacturers to remove themselves from liability.