Rubik's Cube, but some turns are ILLEGAL

[@firejr767]

Jperm: Solves a 3x3 without turning the yellow side Z3: imma do more than that-

[@wasabilai9405]

They are different challenges. Jperm uses normal scramble but z3 doesnt scramble the side which is locked

[@TheUntitledTagGamer]

☝

[@antirogue825]

@@wasabilai9405 🤓

[@10-to-the-games]

Totally not watching that 1x1x1 tutorial for all 6 sides.

[@romanallgeier4661]

@@wasabilai9405did he not do a normal scramble the first time?

[@thepuggamer1239]

“I’m too lazy” says the person who who did one turn per mile for solving a 6x6

[@ashley_actuallly]

And broke his hand while at it

[@loretoesteller6546]

he also broke his bone, went from US to Canada, and it was raining half the time

[@haipingcao2212_.]

😮😢😂😂😂

[@expunged2137]

Says the person who said "who who".

[@thecubeisalie413]

@@expunged2137 🦉 🦉

[@nanamacapagal8342]

I managed to notice a few things: 1 side: trivial case 2 sides: opposites (RL) is a trivial case adjacents (RU), you'll never have CPLL. You can get away with just the RU U-perms 3 sides: RUL is really similar to RU, so pretty easy. But also you need different algs for PLL so I used an RUL J-perm RUD: Used RUD T-perm. Technically similar to RUL if you allow cube rotations but when solving cross on D, this is different. Some algs work at this point RUF: You need different blockbuildings to get F2L down. Don't start with cross, start with the FL edge. Most algs work at this point 4 sides: RULD: All edges are oriented so proceed as some modified version of ZZ RULF: F face is the only way to fix orientations, so solve B edges first 5 sides: No D: easy, just be cautious of algs to use NO B: do EO first, then proceed with RULD NO U: use S moves to get away with F2L, then use modified OLL and PLL algs: OLL, do corners first before edges Fat (anti)(back)Sune in place of (anti)(back)Sune To flip 2 adjacent edges (UF and UL): Fat sune y' Fat Backsune To flip 2 opposite edges (UL and UR): r U2 r' F R' F' R U' R U' r' y Fat Antibacksune PLL, use A perms and MU U perms Bonus content: It's possible to solve the entire cube using only U, E, and x You can use combination of U, E, and x to make y You can use combination of x and y to make z You can use combination of U and xyz to make UDLRFB

[@zaviyargul]

Sheesh

[@Alex_192.]

a few?!

[@twaan1524]

Are you a rubix cube researcher?

[@tinyequine]

Bandage mods are a delight. I highly recommend the DIY bandage cube kit from cubetwist for all your not-putting-tape on your cube needs.

[@Bubitalk]

the tape is just an indicator, it's not exactly bandaged, the restricted sides were tightened so hard they can't turn

[@NerdStuffing]

You should a cube the worst again. There's a lot you haven't really done with it. Some ideas I had: Imperfect magnet locations Varying spring strength Varying screw size Glue 2 random things together. Use stickers with different shades.

[@Superflip_Cuber]

Could you do an experiment where you put in every magnetisation in a speedcube ever? That means: Corner Edge Magnets (48) The crazy 6 ring Maglev (from the moretry Tianma) (36) 20 Magnet Ball Core (40) Edge Feet, Corner Feet Magnets (48) (also from the Moretry Tianma) Center Edge Magnets from the Valk 3 (48) I would love to see how a cube with over 200 Magnets turns!

[@Reaktron88]

I did this for an April Fools day joke once, but I didn't actually make the cubes. I just wanted to get J-Perm Mad. Introducing the all new MoYu YJ Weilong GTS W RM v9 2024 v2. With 31 different versions. Each version was a different combination of the magnets(I hope I calculated the combinations right). I also made the names of them very weird and annoying, with it all being google translated to Chinese so that I could say "The Chinese has some mistakes so... Hope you can read english!"

[@Reaktron88]

He would need to start with the fully upgraded MoreTry Tianma, maybe the ShengShou YuFeng v1/v2, but it could be possible, especially considering the kinds of things Alex does to his cubes, he could probably do it.

[@ranchoabilities7928]

4:25 4:37 4:46 Ay! R2D2!

[@MrEFynn]

It's good that you know enough tricks to solve a cube with only 3 sides turntable because that I think would be the hardest one

[@PBwithParity519]

junior is blind

[@PBwithPARITY-juniorisblind02]

junior cant se da cube caz hez blind

[@PBwithParity519]

@@PBwithPARITY-juniorisblind02 no he cant hez blind

[@Testboi96yt]

@@PBwithPARITY-juniorisblind02ok who let their cat on their keyboard for more than 2 seconds (seriously, stop speaking like a 3 year old.)

[@Testboi96yt]

@PBwithPARITY-Juniorisblind WHO THE F*** EVEN IS JUNIOR ANYWAY AND I DONT WANT “hEz BlInD” like stop speaking like a f****** 3 year old

[@Subzero02.]

I like this video because of how he also tests what happens with different combinations of restrictions

[@speedcubingdotorg]

you can save the hassle of putting pairs into other slots when 3 sides are bandaged by doing variations of R2' F R F' R at different angles

[@ignDart]

yeah or just sledge the pair so that its eo changes without breaking

[@DavidvanDeijk]

great video concept, we all tried some restricted cubes but this is a nice complete overview. Also like how you added some cube theory for new cubers, like orientation. Keep it up!

[@bblir]

9.40 - That's basically a 2x2! Just with the edges visible

[@Alex_192.]

that's what a 3x3 is. erm, ackchyually I'm wrong because most 2x2 speedcubes have a big corner

[@itllmakesense7662]

13:36 Do The Evil Corner Twist Move

[@cuberaccoon]

Very cool! I also made some of these challenges, for example only R,U moves (this is your case of four layers blocked), only middle moves, only double moves (that one was really interesting, since you have to come up with algorithms of, say, the H-perm which only has double moves). It's a really fun challenge and no new puzzle is required. At the same time (and you have mentioned this with the Siamese cube) this is also beneficial for solving other puzzles. Having a T-Perm at your disposal which has only R2 moves makes it possible to apply this one also to cuboids. I will definitely try out the challenges from your video as well. 👍

[@The_NSeven]

10:31 Easy alg here: R' F' U' F R

[@unirox13]

Kind of a "reverse bandaging" type of technique in the beginning. But once you start bandaging before the scramble, it basically becomes a "bandaged cube" type of situation. still slightly interesting.

[@axionyx]

'im too lazy to do that" at 8:40, from a man who posted "i turned a 2x2 into a 3x3" and "making a 3x3 have 5 different solutions" which both required skill and patience.. alot of it

[@kierantmcgar]

Idea: Solve a cube only with algorithms, no turning normally like R2 or f'. You can also do made-up algorithms, as long as you say what they do.

[@loafiscool]

I have came to a conclusion after hours of trying I could not solve the all 6 side’s restricted.

[@bassboijacob]

Have you tried solving a cube under red light? Try it, it’s hard

[@ChrisV57]

I did that once, but i had help from a friend. It was still fun though.

[@MrEFynn]

Your about to hit 800K btw

[@BaoLa-dh8er]

1:03 doesn't turn 1:35 keyhole 1:47 OLL 1:58 doesn't turn #2

[@ardnamalas1357]

wow, such a nice video. You mananed to teach so much with a very simple video!

[@shira.8721]

He took bandaging to the next level

[@mrjstris]

solve a Rubik’s cube with your elbow

[@JoeBrowning-n9k]

No.

[@simplesmentecubing]

Yes.

[@djclark7772]

800K SUBSCRIBERS Z3

[@thecubeisalie413]

10:29 you can insert it with R2 F R F' R

[@gamingwithroxas5211]

A mirrored sexy move is called an ugly move

[@Bacon_gang71147]

4:03 HELL NAH BRO SAID :I’ll so sexy move

[@GoatedPerson-nh7jm]

The 6 sides restricted was too hard for me

[@MalCollab]

HEY AND YOU ALSO said we all agree that orange is the worst side on a rubiks c7be.😂😂😂

[@bananasauce1000]

one of my favourite cubing challenge videos from one of my favourite cubing youtubers

[@JamesonJamestackSwick]

I would like seeing this as a WCA event.

[@noahdalentoft8076]

There's actually a lot of RUL algs for Gd perm, they just suck a lot

[@PowerPandaMods]

In the end, you created the unsolveable 1x1x1!

[@ignDart]

8:34 noo z3 eocross man, you're doing it the better way

[@timothylewis5347]

I am planning on making a full gold rubiks cube, I know you do cool things with cubes, any tips?

[@Dauntlesscubing]

so close to 800k...

[@danik0011]

For 5-side and 4-side, use ZZ to reduce to RUL..

[@GabrielAndrews-eu7od]

Bro found out how to turn into a gan robot lol

[@CCTVIO247]

3:39 I would've done F R U R' F'

[@lc846.]

Can you make a 3 by 3 by gluing the wings of a 4 by 4?

[@Jakethecuberofficial]

Yes

[@EthanLin-j7p]

Now do it with a 4x4

[@SebFromTheRockingKittens]

Underrated comment

[@Subzero02.]

2-gen is so fun and I use it for faster tps and zb recog

[@Justin_Animations]

1:14 turn the middle

[@excelmaster2496]

The screw holds the middle and the layer together, otherwise he could just turn the middle and the bottom to basically turn the top

[@k27vids1]

Z3 next video: making a 3x3 into a 4x4

[@RuCubingOfficial]

1:02-1:12 can’t you do a wide u move for that? that’s usually what i do in my solutions

[@MichaelDarrow-tr1mn]

no because that rotates the white side

[@excelmaster2496]

If you could move the middle layer, you could just turn the middle and the bottom to turn the top

[@JoyCubing]

This was so cool to see because I have been doing these exact challenges over the last 5 weeks while I can't speedcube due to a broken hand!

[@SaitoTheSmashGame2005]

13:36　Utterly impossible

[@Username-yj9hz]

The true bandage cube

[@Peter-e5e]

The white side was the hardest I saw

[@IbrahimKulenovic]

Make an Incredibox Sprunki cube in the next video

[@bkaisara]

13:33 why did you bandage a 1x1?

[@MilesMinecart]

Awesome!

[@lolis257]

The cube is crying man

[@MalCollab]

Wellits hard to solve the last one. Because how do you get all the black tape on one side😂

[@Carson-z5w]

I noticed the R2 D2 move pattern with two sides

[@samstanke1699]

When you said 3 sides are restricted, didn’t you mean that was like solving the first cube of fused cubes?

[@Nicoder6884]

What's the difference between fused cubes and siamese cubes again?

[@samstanke1699]

@@Nicoder6884I don’t know.

[@Redx9879]

Phil yu approves of the vid

[@stephanieamanyi9503]

Why do i always get these cubing ads before i can watch cubing videos😢

[@eskimium]

can u make tutorial video for solving mastermorphix 4 by 4

[@theodriggers549]

request: 6 illegal turns

[@theodriggers549]

oh wait,

[@ttmfndng201]

that's the impossibly difficult 1x1x1

[@Jakethecuberofficial]

Nah

[@Damjes]

i feel RUBar vibes

[@RubixCubeForNoReason]

Can you make a 4x4x1

[@terriblecod4player]

So do you know what happened to jperm does he just not post anymore

[@asderfatih]

me when see z3 dont do doubleflicks: 💀

[@Cristianmiler]

badange cube 11:31

[@bkaisara]

9:39 can someone reply to this comment and explain the joke?

[@pi3.14etc]

because he said "anyway" but he can't turn the cube ANY way, its restricted what ways he can turn it

[@bkaisara]

@@pi3.14etc thx

[@prospeed1111]

He also did the N perm

[@JoMama-b3k]

What about 7 illegal sides

[@Darth_B]

You’d need a megaminx for that

[@The2025Not-Channel]

​@@Darth_Bdude you are forgetting the bishop in the 4th dimension

[@Darth_B]

@@The2025Not-Channel i haven’t learned that part yet, I’m only 15

[@Jakethecuberofficial]

999999

[@ummekhadija7099]

Do that with megaminx

[@kebabaro2878]

Can u make a 3x3 made of osmium?

[@anitakph1231]

4:25 r2d2

[@Seafor-v4l]

Bandage cube at home:

[@mayhfmah2107]

R’ L’ F2 B2 R L

[@IbrahimKulenovic]

6:66 Or a minx

[@benjaminwasfound2]

1:04 u?

[@Somebody0726]

The new j perm …..

[@Fnt379]

When

[@JoeBrowning-n9k]

Are you gonna take off that tape?

[@nengbaylon8345]

Try this on a megaminx

[@carterjones311]

When you think about it, there’s always a way to solve it.

[@dr.shahidshaikh1963]

Make word's largest magnetic cube

[@PhoenixGaming1234]

easiest one is 6 illegal (you cant scramble it)

[@maritzacardona3074]

😂

[@builders_republic]

can you make a 3x3x0

[@eggisbored]

1:24 you turned it

[@bananasananabs]

He did D wide prime which is just a U then a Z rotation

[@MrIlegales3]

Hello z3cubing! I got a flagship tornado v3 m and the core rod got out. And everytime I try to put it in it gets super loose. And once I get the core rod inside and all the peice in. And when i move the cube the fast i can the core rod and the peuces fly away! Im so frustrated and confused if its broken or if this is normal. And even if i put the rod tight it still those the same thing. So please make a video about it please.

[@minchengzheng7510]

ha beca cudont sove it with six sides restricted

[@NhanTriNguyen]

Solve a cube with your feet

[@PatriciaMarcial-ok4jz]

What

[@Helprduhbot]

hey Z3cubing, maybe you should rephrase the thumbnail, you make good content but i never see it getting viral, maybe something like "how many sides can i NOT turn and solve a rubik's cube" HHMMMMMM??????

[@Canyonpettitt]

I don’t think he does KZbin to go viral I think he does KZbin for fun and as side income

[@Helprduhbot]

@@Canyonpettitt well uhmm.. does he have a job? Or anything other income besides youtube? Cuz if he doesn’t well he would well wanna go viral. What am i saying?

[@Canyonpettitt]

@@Helprduhbot pretty sure he’s still in college I’ll have to ask him at an upcoming competition

[@Helprduhbot]

@@Canyonpettitt oh, pffft, doooi college

[@Canyonpettitt]

@@Helprduhbot ?

[@bunchie2012]

I'm have megaminx

[@SuperRJ07]

1x1x2

[@thesciencekid.fernandez8670]

Sexy move🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨

[@rccubing907]

1:15, hey Z3, you missed E slice moves to correct the white cross. 10:30, instead of destroying the paired f2l, you can do the alg like this Facing blue* R' F' U' F R

[@bl3wis274]

Call your super sqare 1 star, a stupid sqare 1 star. 😂😂😂😂😂😂😂😂😂😂😂

[@CuberII]

70th! I am such a villain haha

[@miladkhan3654]

Aeeeee

[@skoolingjuelz6594]

👇🏻3hour gang

[@PBwithPARITY-juniorisblind02]

junior is blind

[@MrEFynn]

OMG your doing it to Alex to?

[@PBwithPARITY-juniorisblind02]

@@MrEFynn hez blind

[@calebDoesCubing]

yo