Ruger® Mark IV™ Disassembly, Cleaning and Reassembly Tech Tip

In this video you will learn how to disassemble, clean and reassemble the Ruger® Mark IV™

[@chrisolsen7624]

I bought a Ruger Mark IV about a month ago and I'm extremely satisfied with my purchase thank you. Such a great pistol.

[@P-12]

This is so much easier than the mark III, I sold my old mark III and bought a new mark IV just because of the easy disassembly feature.

[@towermonkey2000]

I have 2 mark iii. I was thinking the same thing. This looks super easy. I have been thinking of upgrading mine to the mark iv

[@jamesharris184]

So well done. Especially when you say don't use too much oil BECAUSE it will attract dirt. I have the Target version and I love it. Fun and inexpensive to shoot. Thanks for taking the time to post!

[@rallypoint1]

I’ve had a Mark II since 1991 and I can’t believe how easy the IV comes apart and together!!! I want one!!!

[@xNevikKx]

Just shot my new mk 4 today. At fifty yards, standing, I was hitting a 12" plate. Cleaning was a breeze. Thank you Ruger!

[@joeconiglio]

Really enjoy my Ruger Mark IV™. Note: It was my first "starter" pistol. Very economical to use. Great to train new shooters with it.

[@akapanky]

Same. Now it's got a dead air mask, a holosun green dot and it's one of my favorite range toys. Always puts a smile on everyone's face who shoots it.

[@xkernalsandersx]

It's the reason I just bought mine. I'm terrible with handguns and I hope to learn a bit with this thing

[@Zantar45]

I remember hearing stories many years ago about how annoying it was to take apart one of these Rugers and then put them back together. Now that they simplified the process and added the pistol to the California handgun roster, I am definitely going to be buying one in the very near future along with a SR22

[@tuffguy6852]

I've never even seen one of these in person, but I have about 15k rounds through a Buckmark. Takedown on the mk iv looks impressive. That grip angle is pretty extreme, though. I need to hold one to be sure.

[@LogosMediaII]

@@tuffguy6852 Reassembly of my Buckmarks is a nightmare trying to get the spring back in without launching the nylon piece across the room. As Crisis B says, the Mark IV was just added to the CA roster, and I just purchased one today. I may sell a Buckmark now that I have this.

[@tuffguy6852]

@LogosMediaII takedown is the only thing I don't like about my Buckmark. I don't even fully take it down anymore. I just lock the slide back and clean the best I can. I wonder if the 22/45 will become California compliant as well.

[@mgshn]

After 45 years I moved up from my MK1 to a MK4. It was worth it just for its ease of reassembly. However, right out of the box, the trigger needs to be reworked. After that, it's a great gun.

[@animalsoul444]

no it dont needs to be if you not shoot in profi sports.., is just you strange people who always think you need to change things

[@adamg9518]

​@@animalsoul444ur dumb

[@RascalCatify]

Holy crap the mk4 is so much easier to disassemble than my mk3!

[@markyoung2981]

Thank you for your time posting this excellent information.

[@adamjaeger4189]

I literally hated disassembling and reassembly of my Mark 3. I hated that pistol. Thanks Ruger for making the Mark 4 the easiest handgun to field strip ever. Loving my Mark 4 , accurate, easy, and fun to shoot. The Ruger Mark 4 is the absolute best in it's class.

[@codyolsen6961]

I thought you weren’t supposed to dry fire .22 pistols. Can I dry fire my Mark4 without causing any damage?

[@cosmicbird1850]

Do not dry fire it. Get some snap caps.

[@BobcatBart]

Go to auto parts store, buy can of electronic cleaner (NOT electric cleaner), spray everything, give it a few scrubs with a small toothbrush, a pass down the bore with a snake, spray everything again to clean off what you just brushed, wipe down w/slightly oily shop rag, a drop of oil on lube points, done. I do this standing next to a workbench in the garage while spraying parts over a large trash can; takes less than 5 mins. No longer a buzzkill going to range and dreading the cleaning. Electronic cleaner immediately dissolves dirt and grime, especially where a rag won't reach, and dries completely w/o any oily residue. Won't hurt metal finishes or plastics.

[@TBNTX]

I love Mark IV, but mine has a built-in suppressor. Mine is the Sicario. It's very quiet!

[@driverjamescopeland]

The Mark IV is nearly perfect. I was just hoping you would start offering it in 5.7x28... especially the Hunter 6.9 and 10" Target variants.

[@Newberntrains]

This just sold me on getting this pistol next month 😍

[@ronaldornelas5786]

I bought a Mark IV when pistol stock was low and pistols were hard to find. Bought it on line because it was in stock and been looking for a .22. Had fired an older Mark II so I was familiar with the gun. This was an excellent purchase. I am very satisfied with this gun. Love shooting it. I do think it needs a sight adjustment as my shots have been off and to the left. Any advice would be awesome. (Just fyi my brothers shots were off left also) Still a great gun.

[@michaelprosser3466]

It’s safe to dry fire it after re assembly?

[@aandc2005]

Wish Ruger would make a .22 mag in the mark series...

[@izs1991]

Who is this guy? I’m convinced it’s the same guy from the mark III video from 15 years ago. Same watch, voice and mannerisms after 15 years. Seems much happier with the disassembly process though lol

[@gventure4002]

Hi, Is it possible to have the references of the products and items that you are using in the video ? Thanks

[@NS222]

Did you find out what products were used in the video? Thnx

[@jonathanl2748]

So it’s ok to dry fire the Mark IV?

[@smc4606]

Yes but only recommended for occasional, not consistently. It's in the manual

[@typedeaf]

A popular rumor is that cleaning the barrel bore might not be great for accuracy; resulting in having to first fire enough shoits to foul the bore before you can get reliable accuracy. Opinion?

[@NS222]

I bought the Mark IV Hunter and the shop owner told me to only clean the barrel bore once a year or when the accuracy starts to degrade. For the reasons you mentioned. So that’s what I will do but I have to say I’m very new to guns in general. :-)

[@josemariaserrano6390]

Beautiful Gun.I want one

[@WretchedPlebe]

I picked up mine yesterday and it's great.

[@mrssuunn]

Will dry fire damage the firing pin of Ruger Mk4?

[@PsychosisPC05]

They should do a Mark III video, it sucks to disassemble.

[@WretchedPlebe]

There is one by Ruger from 14 years ago.

[@billelston677]

Excellent and what a great pistol!

[@user-gu6bs7og2e]

Очень хороший пистолет!

[@fabiobandini]

I heard you should not dry fire a rimfire firearm, but it’s done a couple of times in this video. Is that not the case?

[@zebswinney9912]

People are always going back and forth on that. Once in a while it's fine. Even the manual states it's fine to do on occasion, but if you're planning on doing a bunch of it to use snap caps.

[@chrismc410]

Why did it take them 50+ years to come up with that method of cleaning

[@patriot4life262]

63 yr old female… I love my MarkIV Target, accurate, easy to clean. Fun gun and everyone who sees it says good things about them, “ I gotta get one of those”, OR “I have one and love it.” BUT Told and read in manual.. DO NOT DRY FIRE..

[@sixsentsoldiers]

Thank goodness hes wearing safety glasses.

[@Cole-xq2tl]

The way he says "piece of cake" you KNOW he's remembering the MkIII's god awful disassembly procedure. I'm pretty sure if you reassemble a Mk3 incorrectly you'll summon the cenobites from Hellraiser

[@glitcher4622]

Please remove the magazine before racking the slide....then visual and physical inspection.

[@smc4606]

👍 I believe that is the order in the manual

[@dnmpatriot]

i still have my mark III but I only clean it when I want to swear a lot.

[@prestondunlap8228]

anyone else think this guy sounds like Jeff from Athlean-X?

[@fritzynh1905]

Why doesn't anybody clean a dirty gun? Show the before and after. Show how 'easy' it is to actually clean the frame of a firearm that has been shot a few hundred times.

[@ckedlr]

Can you never zoom in so we can see what’s being cleaned!!!

[@tonyveliz6948]

Loud ass intros 🤦🏽‍♂️

[@user-bc8hp7gf9w]

Get a new camera man!!!

[@user-jy6el3ts8k]

Ruger has been experiencing employment difficulties, as no one wants to work, and those who do, are overworked. As starving becomes more prevalent because the free crap will stop, that will change. I never help people begging, especially if they have a dog, they can eat the dog.