Ruger Wrangler 600 Round Follow Up Review

[@Vincent12]

Voted the #1 revolver out of all calibers in 2021. Great gun, I’ve used it on my ranch quite often

[@johnshandloading7907]

Very nice. I would actually like to get two of them.

[@Vincent12]

@@johnshandloading7907 I’ve thought of doing the same as well. You get a lot of bang for your buck

[@Jeanie363034]

@@johnshandloading7907 I have 2 of them and a Henry 001 classic lever rifle.

[@stuco]

I got one a few months ago. Before I ever shot it the cylinder got the same kind of wear just turning it because it rubbed the loading gate. I emailed Ruger and they said they'd fix it but I decided it's not worth the trouble for me or them. I luckily got a pretty darn accurate one and it's very fun to shoot! You really can't beat them for the money.

[@shanedejesus1843]

Just got this today and shot 250 rounds with my dad. No problems. It took a little bit to get used to the sights but after that it was so much fun

[@johnshandloading7907]

They are a lot of fun to shoot. That is the biggest reason to get one IMO. Economical, fun, and very low recoil. Easy to shoot and great for a first time shooter. I love mine. Thank you for watching and commenting.

[@NLINE7]

My Wrangler seems to be way off on it's sights. Another words I believe I'll have to learn to compensate my point of aim. This may be typical for a revolver such as the Wrangler. I agree it's fun to shoot if you can figure out where to hold it to hit your target. I've only put around 200 rds through it and I have to hold point of aim about 2 inches low in order to hit what I'm aiming at.

[@johnshandloading7907]

@@NLINE7 definitely takes finding the sweet spot. especially with the notch being small and shallow.

[@shanedejesus1843]

@@NLINE7 it takes a few hundred rounds to figure out where the point of aim is. Once you figure it out it’s very accurate. I’ve now shot about 700 rounds through it

[@NLINE7]

@@shanedejesus1843 Yeah I agree I'll get it figured out, I do like the Wrangler and I believe I'll like it a lot more once I do find that sweet spot so to speak.

[@J.R.F.23]

NOW Ruger has "announced" the Super Wrangler. 22LR/22WMR combo, with a 5.5" barrel and adjustable sights. with a $329 list price.

[@G56AG]

Every revolver gets a buildup of debris above the forcing cone, and 22 rimfire ammo is fairly dirty. Almost every revolver will have the drag marks around the cylinder, and this one raises the locking bar against the cylinder as soon as you close the loading gate, so it will drag against the cylinder till it locks in place. I've shot pistols in competition for over 50 years, I used to shoot a custom S&W revolver in PPC matches, and in match season would fire 800 to 1,000 rounds a week just in practice, and lead wadcutter bullets are incredibly dirty, so when I wasn't shooting, I was either cleaning my gun or reloading! LOL 😄

[@maxxbear5014]

I have a single six Ruger. I like it a lot. Thanks for showing you gun.

[@johnshandloading7907]

Thanks for watching. It is a good gun for what it is. I was a little disappointed in the finish wear when it was brand new. But it has served me well.

[@dannystephens7246]

Normal wear that shows it is breaking in and seasoning the barrel. Just keep shooting it, It will be Ok. After you have it broken in just put a set of wolf springs in it and you will never get rid of it!

[@DisHammerhand]

I use a toothpick to pick that buildup off near the forcing cone and out of the crannies on the cylinder. I love my wrangler: I've only had a couple rounds fail to go bang in it.

[@johnshandloading7907]

They are definitely fun to shoot. cleaning nooks and crannies is a good thing. Thanks for watching.

[@davidrodkey3522]

Rugers Customer Service is first rate and impeccable.

[@shotgunnerB]

Thanks for taking the time to keep the rest of us out here informed!!👍👍🙋

[@johnshandloading7907]

You are welcome. Thank you for watching and commenting. I never know what people think unless they comment.

[@deenandrews2970]

The best gun I have found. I have. 6 Ruger wheel guns, 2 44 mags 1 357 mag.3 22cal.

[@johnshandloading7907]

Good to know. I really like it. Revolvers are great to shoot in every caliber. Thank you for watching.

[@757optim]

Watched another reviewer who had to send his Wrangler back to Ruger for a repair and he said he got it back in one week! That's impressive.

[@johnshandloading7907]

They have great customer service. This is also a really nice gun for pure shooting enjoyment. Thanks for watching and commenting.

[@J.R.F.23]

Ruger has some of the best customer service in the industry! Has always been that way since I bought my first Ruger in the late 80's!

[@thelonerider9693]

I found you can scrape the built up off the inside of the top strap with a thin wide bladed flat headed screw driver. Mine is pretty accurate, for what it is (tho I am not lol). I like that it means I can shoot a single action without paying through the nose for .45 colt or .38 special.

[@johnshandloading7907]

Yes they are fun to shoot and cheaper than a bigger caliber. Cleaning is not hard, buildup just something I noted. Thanks for watching.

[@dockwatt]

My Wrangler out of the box wouldn’t allow the cylinder to rotate when loaded. Contacted CS, gun was back in about two weeks repaired and no problems.

[@johnshandloading7907]

That is excellent customer service. I am glad to hear it. They were willing to do whatever I wanted and I just decided to live with it. Thanks for letting me know your experience.

[@ctownstepper4716]

Mine did they but was more of an ammunition problem not a gun problem m.

[@RyanSpringer1984]

Just bought one and definitely gonna cover it with Ballistol first. Appreciate the video sharing this information.

[@dennishein2812]

Every single action I’ve ever owned had similar wear marks. Shows it’s being used. Never had a cerakote one though.

[@johnshandloading7907]

It is a good little revolver. I like it and shoot it often. Thank you for watching and commenting.

[@twolak1972]

Damn fine little gun. RUGER always has made quality its no.1 priority and these guns prove it .Getting a 7.5 inch model soon and cant wait to hit the range.

[@jpdaddy678]

Mine looks about the same as far as wear at about 6000 rounds..never got any worse

[@johnshandloading7907]

Good to know. Did your cylinder rub on your frame when it was new? I ask bc mine has rubbed since it was new and Ruger says it should not rub at all. I like the gun a lot.

[@jpdaddy678]

Yes it did for a bit but broke in nicely..keep scrubbing those cylinder holes with a new bore brush , now on mine the bullets drop in the cylinder really nice even after a couple hundred rounds without cleaning

[@lukesky1998]

John's Hand Loading make sure the cylinder is sit properly cuz I took mine off but I noticed I didnt put it back properly and my cylinder got scratched but it was cuz of that. I’ll probably end up calling ruger to get a new one

[@echosreloadingchamber7306]

Very nice revolver. I've had an original GP100 in stainless steel with a 4-inch carry Barrel since 1990 when they first came out. I am a huge Ruger fan when it comes to wheel guns. Thank you very much for sharing. The black soot that you're getting around the cylinder cartridge holes can be a direct result from using low pressure 22 ammunition and it not expanding the case enough to keep that sort from crawling back around the cartridge and getting the cylinder face where you loaded nasty. Try using CCI Mini Mags and that should cut back on that problem quite a bit. The cylinder where that you're getting from its spinning on the lower locking lug is absolutely normal with all revolvers. Echo

[@johnshandloading7907]

Thanks for watching. I used a variety of ammunition and it all performed well.

[@covid-19ispsychologicalwar10]

Pretty sure the gp100 came out in 1988, when they discontinued the Six series

[@garyfurman]

Echos.....THANKS much for the informative response. Nice to get educated experience based info.

[@framusburns-hagstromiii808]

I have four Wranglers and all have the same finish wear yours does. I sent my first one back to Ruger and they re-coated it but the wear came back Very quickly so I think that's just one of their quirks. Also quick turn around by the way. I had another with the chambers very roughly machined with proud metal interfering with cylinder rotation. Ruger sent me a new cylinder within a few days. All four of mine are picky about ammo and will tumble bullets with some brands. Accuracy is just 'so-so'..good enough for Cowboy action shooting. Lastly, 3 of the four have very stiff loading gates that have not improved over time and thousands of rounds. They are ok for what they are not great. Just ok.

[@johnshandloading7907]

Good to know. Thank you for the detailed description of your experience owning four of them. I am happy with what I got for what I paid for it. I may buy a second one. Have a great day!

[@georgiaboy4410]

Nice revolver John and 600 rd report👍🏻

[@johnshandloading7907]

Thanks Georgiaboy.

[@tomfreebern2556]

Just bought my wife one waiting on the permit to go pick it up she loves shooting 22 pistols

[@johnshandloading7907]

They are a lot of fun and ammunition is not as costly. The Wrangler is a great gun for the money.

[@tonygslc801]

Very nice pistol, a revolver and a lever action are next on my list. 👍I love my Ruger pistol and Rifle 👊😎🇺🇸

[@johnshandloading7907]

It is fun and I am glad I bought it.

[@davidmiller6981]

Have had mine for about a year shoot just like you 7 YRD. much tighter group only complaint loading gate so tight wears on thumb oiled sat watching tv opening closing just to wear it in tight sent back to factory same tight loading gate good shooter

[@williambotts635]

Mine has worn back near the fireing pin area as well and shoots as good or better than your target. I too contacted Ruger and they said they could recoat it for free but I figured it will just wear again so I decided to just keep shooting it. As long as the metal isn't wearing then I am fine, the cerakote is even coming off my muzzle but that could be my cleaning rod doing it. I have now a otis cleaning kit in case it was the rod.

[@lylewitt7393]

I bought one a couple of years ago, it's haven't had it out yet,

[@J.R.F.23]

Good video thanks for posting! As for your lead-ing around the forcing cone; are you by chance shooting any Remington Thunderbolts? If so I highly recommend not using Thunderbolts in ANY revolver. They have a long history of heavily lead-ing firearms, especially revolvers. Myself I just gave in and ordered a Ruger Wrangler (Talo Edition), with a 3.75" barrel, birdseed wooded grips and holster for "under" $300. Which is a great price with the wood grips and holster. It will maker a nice plinking edition to my collection.

[@AlaskanBallistics]

I'll probably get one to match my bronze cerekote gp100 ruger did up for me

[@johnshandloading7907]

That would look nice. They are fun to shoot.

[@sixshootertexan]

Good review. I need to get a pair of them.

[@johnshandloading7907]

I would love to have a second one and holsters. They are great little pistols.

[@Jeanie363034]

I have 2 black ones and a Henry H001 classic lever gun .

[@paulbaker5920]

If the factory said they would fix the problem and return it in like new condition then you should have sent it back. I've owned more Rugers than I can count and I've only had to send one back. The factory quickly corrected the problem and returned the gun within a week. Take advantage of their offer while you still can.

[@johnshandloading7907]

I am happy with the gun and it works just fine. I may buy a second one. Have a great day.

[@mckwilly]

great service, and cosmetics are not a huge deal, kinda depends on the gun, as my guns get used and shot alot

[@johnshandloading7907]

Yeah I like it and wanted to shoot it not have it tied up somewhere for a month. I like it better than the Heritage revolver which is why I bought this instead. I do try to take care of my stuff.

[@mckwilly]

@@johnshandloading7907 I agree I enjoy cleaning after shooting but not gonna worry bout the lil stuff

[@luismaryland2305]

I don't love cerakote. It's a medium grade paint marketed as top of the top. If car manufacturers does not use it for some reason may it be. I painted my guns with Glasurit and Sikkens, they last forever. Wanna try using Dupont. Any of this paints are more expensive than cerakote. Thanks for your video!

[@johnshandloading7907]

Good to know. Thank you for watching and thank you for commenting about the paint.

[@luismaryland2305]

@@johnshandloading7907 subscribed. Thank you

[@RequisiteFunction]

I just came across your comment. Is it possible the cerakote is used instead of better wearing paint, for its heat resistance?

[@luismaryland2305]

@@RequisiteFunction not all cerakote are heat resistant. Maybe you can find urethane single stage with that property too. Best way is to give it a try.

[@RequisiteFunction]

@@luismaryland2305 I painted an M6 Scout with high heat engine paint once, and it lasted for years. I'm not sure how/why Cerakote got the monopoly on "other than blue, parkerized, or nickel" finishes. Most utilitarian metalwork is actually powdercoated. Always wondered why more guns aren't powdercoated. I worked at a place once where one of the engineer powdrecoated his Winchester 94. Came out pretty good actually, by today's finishing standards anyway.

[@Coopdog1911]

I see a small void/crack or whatever on the outside of the cylinder that you put the mark next to. As I was typing I had to backpeddle and see if that was the mark you made or not. Am I wrong? Sure looks like it on the video. right towards the outside edge of the right side chamber that you put your mark on.

[@spitfireaace]

first three chords to Tangerine by Led Zeppelin opening. Nice!

[@johnshandloading7907]

You win this months prize for most observant viewer! I made a generic song that was 'influenced by' Tangerine so it is not identical, but that little opening riff is very similar. I like the sound of it so I started using the isolated few seconds of strumming as my 'opening music' a while back. I put the generic song in a video or two as well. Thank you for noticing and commenting.

[@BobbyJr556]

I love this revolver but my front grip frame screw had came loose and lost, But it still work. Contacted ruger and waiting for the answer.

[@johnshandloading7907]

Hopefully they send you a new screw. Good luck.

[@Coopdog1911]

Funny I was just sitting here with my 12 string guitar playing Tangerine when this video came on. What are the chances of that? :)

[@johnshandloading7907]

That is so cool! You are only the second person who noticed the 'similarity' to Tangerine. Thank you for watching and commenting. I always like it when someone who plays guitar mentions the music. It is just me recording on a sound APP on my phone! nothing special but gets me background music that is not a copy right strike.

[@Coopdog1911]

@@johnshandloading7907 Carry on Sir! More of it even!

[@ernest9606]

I find it hard to believe really. No disrespect intended but I baught 2 and both I have been having serious issues with them both. They either skip cylinders or the cylinders pins would pop out after every shot. I baught them both brand new in a box. They had less than 1000 rnds in it

[@johnshandloading7907]

I would contact Ruger and send them in. Mine has been flawless as far as function is concerned. The things I point out in the video with the finish wear and the buildup are the only issues. No major issues at all. Ruger will repair them if there is an issue.

[@NLINE7]

My question, is the cylinder painted or is it suppose to be blued? Reason for that question is on my Ruger Wrangler the front or maybe the face of the cylinder the finish is pretty much all gone only after 200 rds. Its down to bare metal. Out in the field while shooting it I thought it was just a build up of powder until I got it home and cleaned it and realized hey the finish is gone. That build up around where the barrel mates to the frame on mine was a bear to remove and I've still not got it all removed. It looks as if the build up welded it's self to the frame, super hard to remove even with a nylon brush. I've been around guns along time and never experienced anything like that. I have already had to send my Wrangler back to Ruger when I first got it for them to replace the hammer. The hammer on mine was slightly bent to the left to the point it was starting to gouge into the left side of frame right across from the firing pin. Ruger fixed it and they had the gun for about 3 weeks fixing that problem. It kinda blows my mind that now the cylinder face finish is about 80--90% gone after only 200 rds shooting the Wrangler that I have. Believe I'll give Ruger another call soon.

[@johnshandloading7907]

Yes it is a bluing of some type on the cylinder and not cerakote or dura kote. It does get worn off. The buildup on the top strap does get 'welded' just like you said, that is why I pointed it out. Not easy to clean off even with a popsicle stick or such tool. I understand your feelings. Good luck. Ruger does seem to have great customer service.

[@NLINE7]

@@johnshandloading7907 Ok was wondering, didn't see in your video you showing the face part of your cylinder. Like I said mine the finish is about 90% gone only after 200 rounds.

[@johnshandloading7907]

@@NLINE7 I think my original Ruger Wrangler video show the cylinder wear better.

[@zacharymaes9404]

Does yours have a rattle sound when you shake it a bit? My dads doesn’t rattle at all and mine has a distinct rattle to it. It bugs me because I just purchased the pistol.

[@deussanguinius4263]

It's the transfer bar

[@johnshandloading7907]

Mine has a small rattle when you shake it. The sound comes from the ejector moving slightly. When I hold the ejector still and shake, the rattle is gone. As long as it shoots well that noise does not bother me. Good luck.

[@jondough3339]

Mine was rattling too and it was the ejector rod. I bought another spring for the ejector rod hoping it would fix it but it didn’t. So I ended up interlocking both the springs, which added some bulk, and in turn keeps the rod rattling around.

[@mrod7692]

At least you didn't pay $700 for it.

[@guilhermeferreira8288]

Good vídeo! I m thinking in buy one

[@johnshandloading7907]

I really like mine. Totally worth the price.

[@mikemason4792]

Mine iss a month old now. After shooting several brands of ammo I experienced the cylinder binding. This was only with Remington and only some out of the same box. I attribute this to ammo inconsistent case. Is this how yours go the worn spot? Now when I load I rotate the cylinder a full rotation to assure it doesn't drag. Do you have any input on that. Like I said with other ammo it shoots perfectly. THANKS.

[@johnshandloading7907]

Mike, my cylinder scrapes and drags slightly even empty. The binding is definitely an ammo size thing as well as when the carbon builds up in the cylinders. I don't even worry about the wear. It shoots and has performed well. They are good little guns. I like mine.

[@rodvan-zeller6360]

On mine the base pin latch unscrewed itself and the spring got lost. On the Ruger website I don't see where to order parts, what do you suggest? Thank you in advance for your help

[@johnshandloading7907]

Contact whatever customer service you can find -phone number or email and they will help you.

[@rodvan-zeller6360]

@@johnshandloading7907Thank you

[@rodvan-zeller6360]

@@johnshandloading7907 Do you know if the single six and the wrangler take the same base pin latch assembly?

[@johnshandloading7907]

@@rodvan-zeller6360 I don't know but I would assume they are very different. They seem to be completely different materials and craftsmanship.

[@rodvan-zeller6360]

@@johnshandloading7907Thank you for the reply, I called Ruger customer service great company problem solved

[@dandarling5990]

I traded off my Wrangler for another Rough Rider. Hitting bullseyes is fun.

[@pajohnson1716]

Throat on mine is way to big. Keyholes and leads badly.

[@johnshandloading7907]

If you contact Ruger customer service, they will fix it for you. I have heard all good stories about turnaround times too. Good luck.

[@jondough3339]

Need to put some wood grips on that bad boi

[@johnshandloading7907]

I would love to get some wood grips. Was making some by hand and just don't have the correct tools. May order some.

[@guaporeturns9472]

All revolvers get build up around the forcing cone area

[@kafferhond435]

No offence, but that 7yard target🙈 I can shoot a stingshot more accurately than that... Maybe I'm just spoiled with my Browning Medallist .22lr. I would be pissed off if that was a 50yard target with the Browning.

[@johnshandloading7907]

No offence taken. Like I said in the video, it was a generic target standing plinking. No precision involved whatsoever. It is definitely NOT a browning medalist. If I shot carefully and slowly I could make a tighter group. Also using bulk ammo that is sporadic as well. The sights also leave a lot to be desired if you want precision. The top strap has a slot in it and the front blade is just a thin piece. Fun for shooting plates or low cost practice. Taking new shooters to get started. Thank you for watching and commenting. Have a great day.

[@greywuuf]

Thats called bolt drag and could/should be adressed.

[@larrywilliams153]

.22s are just nasty by nature ya shoot em yer gonna have to clean em

[@johnshandloading7907]

Yes you do have to clean them anyway. Cleaning is part of shooting.

[@larryhinze1617]

Just don't put off the cleaning. I clean after every shoot.

[@tzackaria7]

these are not very accurate guns. mine shoots 3 inches to the left at 7 yds. off a rest

[@dayoungbro]

Wear on a $200 gun? Really? 🤣🤣🤣

[@swplatemaker]

LOOKS GOOD...FEELS GOOD...DOESN'T SHOOT WORTH A DAMN....! Don't know why Ruger would put out a gun that doesn't group at all...it's just a piece of junk...waste of money...!

[@larryhinze1617]

Hickok 45 seems to hit pretty good with it. Ammo is really different from manufacturer...and depends on how much Tequila the bullet loader/or how hung over...he is. Sorry, talking about Soviet ammo. I hit pretty good with mine. I think a big fail is more the sights than the ammo or gun. THE SIGHTS BLOW. lol

[@pajohnson1716]

Bought a 22 mag reamer. Shoots fine now.

[@planetcrawdaddy]

Did I hear Led Zeppellin, "Tangerine?"

[@johnshandloading7907]

It is a tune that is 'influenced by' Tangerine, so yes. Thank you for watching and commenting. I strum chords and record them on my phone sometimes so I can get non copyright music. The intro to my channel is now a little strum that sounds a lot like the beginning of Tangerine. Have a great day.

[@larryhinze1617]

Good tune!!

[@swplatemaker]

LOOKS GOOD...FEELS GOOD...DOESN'T SHOOT WORTH A DAMN....! Don't know why Ruger would put out a gun that doesn't group at all...it's just a piece of junk...waste of money...!