Great video. I’m still learning. I’ll need to check out more. Thanks
@ginnyreicker11542 жыл бұрын
Video straight on.
@omtechlaser2 жыл бұрын
Thank you for your feedback!
@angeladelreal9046 Жыл бұрын
how do I reset my ruida controller password my y axis is reversed and I need to reset
@craighatch32212 жыл бұрын
Thanks, this was very helpful. 👍
@omtechlaser2 жыл бұрын
We appreciate the kind feedback!
@RCjunkie Жыл бұрын
Can you do a vid about setting up a new machine, I reworking a Golden Laser with a Ruida 6445G, I can not fine the place were to set the work table size 1300x700, laser hook up
@RedfinPike Жыл бұрын
I have that same controller. Am unable to use machine due to "Air Pressure Error" Message that shows up on the Ruida display when I try to run a program.
@daniebrand86448 ай бұрын
Hi, I am Daniel. I had pretty much the same problem. So I followed the airline from the compressor all the way to the cutting head, and find a 360° bend in the pipe, which prevent the air to flow through.
@antoniolamarca6094 Жыл бұрын
thanks for your videos! I noticed that when I repeatedly cut the same design, the cut tends to gradually move a few millimeters down the Y axis and therefore the cut does not always reposition itself in the same point. What could be the problem? Thank you for your answer!
@readingcraze728317 күн бұрын
What reset button does ?
@gretchenbernal12704 ай бұрын
I was looking at your video , and I have a question how can I change the work area size on the control panel
@freebird1963 Жыл бұрын
Pretty thin on explanations in the video. So you show the min/max buttons but can you change/set them with it ? Once you redo the origin to a new spot from the home spot does it still go home or will it go to the new origin ? So many things skipped over.
@fdennisk2 жыл бұрын
I just purchased an OMTech and I am awaiting the delivery. I have another laser (a diode) that runs directly from Lightburn. Hit “play” and it runs the laser. Does the play button now send the file to the Rudia controller, and now I run it from the Rudia? Or, am I saving the Lightburn file as a different file type and exporting it to the Rudia controller? Similar to a traditional G-Code CNC file?
@Vickers010782 Жыл бұрын
Hello, when i connect steering panel to the mainboard and connect 24VDC without Motors or enything else can i check the menu and other functions on the display? I bought panel and mainboard and when i connect to 24VDC only reset switch is working, i cant enter to the menu. Is this correct? Cheers.
@manfredkeinschmidt120 Жыл бұрын
Question, when I import the file, can I deaktivate Layers. Reson it was nocht cutted out so I need one the cutting layer not the other ones..can you help?
@rusticagenerica Жыл бұрын
Can a Ruida controller be used for a pen plotter?
@josharmour1549 Жыл бұрын
How much different is this ruida controller vs the other Ryxon controller that comes in the 80w manual focus machine?
@jptram00052 жыл бұрын
merci super tuto comment inverser l origin screen ?
@thashkeermawjood57254 ай бұрын
What is the model number of this Ruida controller? Pls as I also have the same controller but I don’t know the model ,
@omtechlaser2 ай бұрын
I believe the model number in this video is the RDC6442S
@saraeissa49546 ай бұрын
Everything works for my machine except the actual laser isn’t turned on
@omtechlaser5 ай бұрын
Hey there if you still need assistance we recommend reaching out to our tech support team. They are very knowledgeable and can assist with any issues you may be experiencing with your laser. Please get in touch with us at techsupport@omtechlaser.com we're also available by phone at (949)438-4949 during business hours of 8:00AM - 5:00PM PST Monday-Friday. We look forward to assisting you!
@robertpfohler363 Жыл бұрын
Your camera is all over the place, it’s hard to watch
@Crazybraincreative Жыл бұрын
This is a helpful video, but the camera moves way too much.