RUN OVER & FLOODED?! Non-running 1980 Puch Murray E50 Resurrection!

  Рет қаралды 1,642

Matt Ketner

Matt Ketner

Күн бұрын

This beautiful 1980 Murray Moped, powered by a Puch E50 Engine, got into a crash and was run over by a lifted truck. Then it was left outside to rot where the engine was ultimately flooded. Now let’s see how quickly I can get it running and take it for a ride!

Пікірлер: 8
@geraldscott4302
@geraldscott4302 2 ай бұрын
Puch/Kromag. Very similar to my 1979 Sears Free Spirit Deluxe. Mine is the 2.0 hp 30 mph model, Bing #68 jet, 15 x 45T sprockets. Has the Puch snowflake cast wheels. I found it at an estate sale. It was complete, still has the plastic sidecovers, with under 1000 miles on it. The frame and tank are exactly the same, except the rear part of the frame. Mine has a longer seat, and a tiny little bolt on luggage rack. Since the center stand was broken, I hope the bottom engine case is ok. The center stand bolts onto the lower case, and I've seen them broken from people standing or sitting on them while they are on the center stand. The stand was not meant to support the weight of the rider. Nice to see someone willing to go to the time and effort to get something like this back in running condition.
@benweissman4410
@benweissman4410 Жыл бұрын
Keep up the good work Austria made moped the puch e50 is amazing engine and parts can be found all over treatsland moped has everything u need i have 13 moped 8 puch and 5 tomos have fun and keep on getting those mopeds back to life
@tashna7831
@tashna7831 9 ай бұрын
I have a the same one! Brought in 2021 have covered in the backyard. Before it stated on one kick. Have the original manual as well Wanted to work on it this winter. Thank you so much for this video!! Play on using it as a daily.
@bkgogoi8636
@bkgogoi8636 11 ай бұрын
Good
@SomalyM-o2x
@SomalyM-o2x 4 ай бұрын
Hello Matt I got the same I don't no to fix it
@robertscarpati3327
@robertscarpati3327 Жыл бұрын
Is it worth it? Too much work.
@mattketner7597
@mattketner7597 Жыл бұрын
Probably not. These bikes were very cheaply / poorly made in a USA Factory back in the 80’s.
@geraldscott4302
@geraldscott4302 2 ай бұрын
It is absolutely worth it. There used to be millions of these bikes around back in the '70s and '80s. There are very few left. There is nothing cheaply/poorly made about them. They were NOT made in the U.S. They were made by Puch/Kromag in Austria, and sold under different brand names by department stores in the U.S.
Puch E50 FULL TEARDOWN and Rebuild: Can I save my vintage moped?
42:22
An Unknown Ending💪
00:49
ISSEI / いっせい
Рет қаралды 14 МЛН
Шок. Никокадо Авокадо похудел на 110 кг
00:44
NEGLECTED Puch ZA50 Moped, FIRST START in YEARS!
14:30
Matt Ketner
Рет қаралды 1,1 М.
How to Remove, Clean, and Put Back Together a Bing Moped Carburetor
21:32
Buying a Classic $120 Puch! Will It Run?
25:39
2vintage
Рет қаралды 80 М.
ULTIMATE MOPED BUILD FIRST START! Puch MAXI 64cc
20:11
MOPBOYZ
Рет қаралды 59 М.
HIDDEN GEMS?! Non-running 1980 Puch Maxi Luxe E50 REVIVAL!
14:10
Matt Ketner
Рет қаралды 1,8 М.
e50 Clutch Upgrade -- Setting Blue Performance Springs
15:14
TravisTutorial
Рет қаралды 47 М.
Puch Maxi S Moped 1977 ( Engine Checks then I go for Start Up )
23:39
An Unknown Ending💪
00:49
ISSEI / いっせい
Рет қаралды 14 МЛН