We always love you, Bruce!!!! Thumb will be arranged as soon as it's back in stock! The RunCam 5 orange you have is already built in gyro, so it works with Gyroflow already. But GF updated a lot recently, we need to release a new firmware to make the runcam 5 orange work again with GF. I will keep you posted about the new firmware! Hope to hear back from you soon via email! Sorry for the delay!
@TheMadmacs2 жыл бұрын
runcam rules!
@Clynikal2 жыл бұрын
Solid catch Runcam!
@MadRC2 жыл бұрын
Great to hear Runcam getting you one now. Since I changed direction slightly and been clear with my review rules and what I am willing and not willing to do I have also found many company’s have just gone silent on me. I look forward to seeing what Bruce has to say as Runcam generally make a good product overall. Especially compared to CaddX right now who are less than Stella to say the least. The editing is so painful on time but it is what it is. That will be a good card. We love Bruce, long live Bruce and RC Model reviews.
@sarahdaviscc2 жыл бұрын
Huzzah! Go RunCam!
@MrLunithy2 жыл бұрын
👍👏
@fallenangels6862 жыл бұрын
You the best knowledge man I have ever listen to , and I think everyone enjoy your videos
@stefano89362 жыл бұрын
That happens when you don't attend university
@Desert-edDave2 жыл бұрын
@@stefano8936 Don't assume that attending a university makes you any more 'educated' than others... Indoctrinated, yes. Educated, not necessarily. Especially today, there is a multitude of stupid kids with very expensive pieces of paper and little but a pretentious sense of entitlement to go with it (and maybe some laughable debt). "The wise man knows he knows nothing, the fool thinks he knows all."
@mrlintonious2 жыл бұрын
I am used the news on being on XJet, and Model info and Reviews on RCModelReviews. Keep it up. Way back, RCModelReviews helped me to understand how to wire up and connect an ESC, Servo's and Receiver, and to setup my Turnigy TX, to fly my first RC Plane. That set my fountation for what I know know. Thanx for that Bruce.
@wrstew12722 жыл бұрын
Bruce- you have a fantastic knowledge base, and I am one old man who really appreciates your generosity in making these videos.
@jb46882 жыл бұрын
That's a no-brainer...put the news here and keep the unadulterated fun...fun...the xjet channel provides the last vestige of what was and hope will remain a great hobby!...cheers and good health Bruce!
@matthewcoleman82672 жыл бұрын
I love your honesty as much as the content on your excellent channel.
@joecaraco75032 жыл бұрын
I think the newsy content ought to be on "RC Model Reviews " but will continue to watch where ever you post. You are the only person on KZbin that I support with Patreon and those of you who watch Bruce and can afford to, should as well.
@MacVision3D2 жыл бұрын
Yes Bruce live would be brilliant.....You know you will get all the support from us
@alexj37092 жыл бұрын
Lots of people on YT do reviews and the audience is restricted to enthusiasts who may want to hear about new products. Your reviews are valuable in that group because we can rely on you to give a honest, warts and all opinion. But getting well informed, accurate, clearly explained technical information is much harder to find. Your teaching vids cover topics much wider than encountered in the hobby. And they get used as a reference over and over, hence they become a vaulable asset and will continue to be viewed over time. Big thank you for all you do, it is greatly appreciated!
@charlesmorgan52672 жыл бұрын
been watching you for years, thank you for all your time, great work please keep it going.
@brightnovastar2 жыл бұрын
You may not have 2 million subscribers... but you sir are the greatest rc reviewer... you are the reason I am in this hobby. I wish you nothing but the best.
@gryfandjane2 жыл бұрын
I’m a long-time fan and subscriber, and greatly enjoy ANY content you post. And I’ll second the opinion of others and say that your tech instruction episodes are truly first-class. Bravo, and keep up the excellent work. It’s really appreciated!
@SavagerobFPV2 жыл бұрын
It all sounds very interesting, I think the news and Information is probably best on this channel, and XJET left for the fun and banter and the odd rant. All the same keep up the good work/fight ;) Thanks
@runforitman2 жыл бұрын
I always find it very interesting when youtubers actually talk about their earnings and how it works.
@OZSCQUADS2 жыл бұрын
because we all like the way you teach. wish there was more of it.
@iforce2d2 жыл бұрын
It's very simple Bruce. You need to stream yourself playing Minecraft with a face-cam on Twitch and act over-excited about every little thing that happens. Play up the 'old-fella' angle and being a newbie at everything. A steady stream of your trademark wise-cracks will keep the audience engaged, young and old. This lets you generate x minutes of video from every x minutes of work, with no editing required. Then with no further work you can put the vods on KZbin and monetize them, cha-ching!
@iforce2d2 жыл бұрын
I wrote that as a joke but then I realized I would probably watch the hell out of that :)
@lobofpv87222 жыл бұрын
Bruce you are a valuable asset for me as well as the hobby in general. I really appreciate your content and look forward to new content. I would say that the 'News' content belongs on RCMR. I have a buddy up in Whidbey Island, WA that is not very happy about the new regs. Bravo Zulu, Bruce
@ericsfishingadventures44332 жыл бұрын
Thank you for being honest about what you do and how you run your channel. I think I'd prefer the news type content on this channel more.
@mikehunt54682 жыл бұрын
Good on you . Share the knowledge. Legend. Your worth every penny
@GeneralLee1312 жыл бұрын
Funny enough, I discovered your channel when you were doing the whiteboard explanations of things. It very well may have been Ohms law or antenna theory when I was studying such things for an Avixa certification. Been hooked ever since. You're just a pleasant and likable guy. Honest and unbiased too; a key factor in who I follow on social media these days. Even though I don't get to play RC anymore due to changes in circumstances in my life, I still like to stop in and enjoy seeing you do your thing.
@billflynn69032 жыл бұрын
Thanks, Bruce for basically giving us this channel for Free!. It makes sense to look to the other sources to help fund the fun things we here in the World, also, enjoy. Your explanation on those videos most viewed were eye-opening and meaningful to anyone in this for a Biz.
@SeaSide4202 жыл бұрын
Nice 1 My runcam was submerged in a lake for a while, retreived, dried and years later still works perfectly.
@paulinfrance52 жыл бұрын
It's a shame that youtube have got soooo Greedy,,, I am watching less and less like radio and TV it's all publicity, it's a good job people like you are still here Bruce.
@MadRC2 жыл бұрын
Long live Bruce and RC a model Reviews. I literally would not be in the hobby again without this man. You you can blame him and I don’t deserve the kindness. It is soul destroying looking at the numbers on reviews on YT. I’ll be honest this is why I have drastically reduced the reviews I am doing. I love to do it but the payback is just not there. Since I have also been more vocal on things I have noticed my inbox go quiet. It is what it is. I think me and you Bruce are the only ones really talking about the money aspect in the FPV creator space but it’s importance conversations that need to be had. To be fair Runcam make some great products to be fair. Look forward to the review for sure. Outstanding as always.
@SimpleElectronics2 жыл бұрын
I think the news works best on this channel - also your videos are not only the BEST drone/model videos, they are the only ones I can stand aside from experimental stuff (RCTestFlight and RCLifeOn) Keep up the good work Bruce!
@flyboy57362 жыл бұрын
I enjoy Bruce’s videos, good information delivered in an honest and knowledgeable way. As a consumer of KZbin videos I honestly don’t care how much content makers earn. If they don’t earn enough don’t whinge to me find another income source. Bruce doesn’t complain just tells us as it is. Good fortune to you Bruce and thanks for your efforts.
@hectorgreen56382 жыл бұрын
Hey bruce 5 years ago I got into vpv you taught me how to make my first quad so I have a lot of respect for you but not just because of that but because you are one of the most honest person I've come to know over the years since I've been watching you on KZbin thanks mate.
@CrazyOregonBeaver2 жыл бұрын
And thank you for all you do to help the community.
@SamFugarino2 жыл бұрын
I liked your Ohm's Law video. And I particularly like your fixed winged stuff. I got into RC late and due to circumstances can't fly now, but I've learned a lot from your channel. Watch your other channel too. New Zealand should be paying you. Place is beautiful.
@tomc13802 жыл бұрын
I love your views and reviews. I’d probably prefer news and reviews together and/or maybe combine both channels.
@dougcaffrey50672 жыл бұрын
Hi Bruce, I really enjoy both your channels. I think of Xjet as the fun channel and rcmodeleviews as the more informative channel. Based on that I think news better fits rcmodelreviews. But it's all up to you. I appreciate all the time and effort you put into thes videos. And it's great that you are sharing your extensive knowledge on all things related tot he hobby. Take care and keep up the good work!
@ChongMcBong2 жыл бұрын
keep up the good work Bruce, i have learned lots of useful stuff from your videos over the years :)
@davidreynolds85512 жыл бұрын
I’m happy to say that I watched the whole video, and possibly made you an extra .0001 cent lol. I like your informative videos, even when they might go a bit over my head.
@robertyoung534 Жыл бұрын
Keep doing what your doing bud I'm learning a lot from you
@AEROERGO2 жыл бұрын
Hi Bruce. This channel seems to fit better for news. IMHO. I love your workbench videos and I hope someday spread all I learn from you to my audience too, mostly for the ones who didn't speak English
@pnwRC.2 жыл бұрын
14:30, That sir, is the reason why I'm interested in the 3D printing of drones! IF there is NO paperwork trail for it, they DON'T know about it. I DON'T reside in an area near an airport, or it's flight path(s). I DON'T feel it's anyone's business what, when, or how I use my drone, so long as I'm NOT dangerously interacting with aircraft while flying the drone! The level of governmental overreach has become very intrusive & excessive lately!
@Desert-edDave2 жыл бұрын
Even if you don't print your own frames, there's still no reason for any government agency to know about your drone(s). :D I agree with you. It's none of the government's business what we do if we're not endangering anyone or property. Screw the FAA (regulating body where I am).
@pnwRC.2 жыл бұрын
@@Desert-edDave FAA here too, PLUS Washington State gov
@flyingweed96712 жыл бұрын
I think the entertainment and rants should be on Xjet. News reviews and white board technical stuff, on RC Model Reviews. Most important is that you keep the content coming.
@bobasher20462 жыл бұрын
I watch xjet for flying videos, rcmodelreviews for information therefore I would prefer any news here.
@olsonspeed2 жыл бұрын
Having made videos for KZbin I completely agree that it is labor intensive and time consuming. Just say NO to state registration of R/C.
@AndyRCchannel2 жыл бұрын
Runcam hasn't sent me anything for ages either..I think it's because the thumb camera is a bit rubbish and me and you would say that haha. Looking forward to the camera stuff on xjet. Need to up my game there. I'm subbed to both channels so it doesn't matter to me where it ends up
@fitchyyboi2 жыл бұрын
Andy- I like how the footage of the thumb looks especially for the price and am considering buying one (I am like you, budget means a lot to me.) What's your gripe with it? Genuinely just interested!
@scooterfpv88642 жыл бұрын
👍👍 Love it! If I can be there for the live stream you can bet I will try to be there! 👍🤘😎
@closertothetruth92092 жыл бұрын
i watch you because of your Brains and character , my school and tafe teachers were lazy teachers , only good teacher i had was an ex nasa physics teacher i could listen to his stories all day.
@bulldogboy1002 жыл бұрын
Another top class video
@typxxilps2 жыл бұрын
I watched this one after being 4 weeks away due to 'runcam don't love me' title and it was fun to watch that it is more or less a different story than the title let me believe. Runcam seems to be back based on the pinned comment and the background info about Ohms law and its revenue stream that still is going on is another point that stoods for your openess and honesty. Good to know that runcam is still your first choice - cause value point is what matters to me in 90% of my use cases and just in 10% I tend to go for the best like dji drones at least till 2021.
@richiebricker2 жыл бұрын
I dont think i need to watch your E=IxR video but I have watched your Antennae theory video and thought it Great! You make for a very good Teacher. I think you should run regular news stuff on both channels and maybe keep the more hardcore stuff on xjet
@edivollgas7192 жыл бұрын
looking forward to your elrs video ;-)
@baggszilla2 жыл бұрын
Thanks Bruce. I think the news should be on RCModelReviews Channel. And Ian (Mad's Tech) has a great Channel too 👍
@mfrfpv90792 жыл бұрын
hey Bruce keep em coming
@JEMTAC2 жыл бұрын
Was not aware your educational vids , will have look. Cracking beard sir.
@jasonhurdlow66072 жыл бұрын
I hadn't heard that news about WA state, and I work and fly there. I'm not surprised though, WA is a total nanny state. That's why I live in Idaho. And those KZbin payouts are atrocious, they should be ashamed for paying so poorly. Congrats on the new 3060, and thanks for all you do!
@MCsCreations2 жыл бұрын
I'm glad you could upgrade your graphics board, Bruce! 😃 Those things are scary expensive right now... I need to buy a new PC, but I'm left it for later. 😬 About the news, however it's best for you. 😊 Stay safe there with your family! 🖖😊
@jasonhurdlow66072 жыл бұрын
Prices are dropping like a rock. But if you can wait until this Fall/Winter I would, as the new cards are going to be considerably faster.
@MCsCreations2 жыл бұрын
@@jasonhurdlow6607 Oh, great to know! Thanks, man! 🖖😊
@retrodudefpv2 жыл бұрын
Great video & really looking forward to your video tutorials 🙂
@andyvonbourske64052 жыл бұрын
i had a good laugh when you pulled out that 1030
@loc47252 жыл бұрын
As news is factual I'd suggest keeping it on RCModelReviews.
@sladelefty2 жыл бұрын
I just became a Patron.
@RCModelReviews2 жыл бұрын
Thanks mate... you have joined those who are the lifeblood of the channel and the hobby. Big thumbs up!
@viperscot12 жыл бұрын
Hi Bruce I can only imagine the work you put into all your videos Subbed too both channels wish I could support you more at moment I like comment, share as much as I can Bestest from Scotland keep up the excellent informative quality videos Yup go for the livestreams too I would put the news on the most popular channel to put it out there stay safe stay well to you and yours 👍👍👍
@viperscot12 жыл бұрын
Had a rewatch of ohm law video 😉😉😉
@toddhazell9252 жыл бұрын
While watching Ken Heron today, one of his co hosts being Ben an Aussie pilot flying for an airline in the US mentioned to Ken about the WA state drone flying fees.
@FPVinPA2 жыл бұрын
"RCModelReviews and News"!
@hateeternalmaver2 жыл бұрын
Yes, I think switching the more serious News part from Xjet over to here wouldn't be the worst idea in the world. cheers ;)
@madcatmk21311 ай бұрын
that's a very VERY nice graphics card!
@gizfpv2 жыл бұрын
I feel your pain. My most recent video took me almost 2 months to produce, and yet hardly anyone watched it 😩 It's the painful reality of being a KZbinr, there's no guaranteed pay check. That said though, I enjoy making videos, so even if noone watches them I have fun along the way :)
@KM-xp1pn2 жыл бұрын
Bruce I love all your videos and is good to see they are being used for training also. I think if you Botgrinder and Stew had a BBQ on the Runway that would be a great video keep up the good work.
@martinwashington31522 жыл бұрын
Great to see still you online, done some wonderful work within pulse engine design. :D *Always been a fan :D
@ChaddRainsFPV2 жыл бұрын
I was shocked to hear you mention Seattle, Bruce. I just got approved for monetization on my YT channel and have been flying for FPV for nearly 11 years. I am studying for my part 107 now and apparently, will be registering with multiple governing bodies to fly legally. Disappointed no doubt, but thanks for the info 🤙
@belperflyer74192 жыл бұрын
I've been watching some KZbin videos called 'Kathy Loves Physics and History'. She does talks/lectures on the history and origins of electrical discoveries etc eg 3 phase transmission or ac versus dc power transmission. One of her videos was also on Ohms Law and how it was discovered and, amazingly how it was denigrated at the time. Worth a watch to bolster Bruce's profitable Ohm's Law video :) I haven't watched Bruce's video mainly because my Dad taught me Ohm's Law on a long car journey when I was about 12 70 years ago. I think news is more suited to this channel rather than Xjet, for what it's worth.
@sf23722 жыл бұрын
i prefer the news on this channel personally
@marc_frank2 жыл бұрын
do both 😅 News on RCMR and Rant on xjet
@mark5101112 жыл бұрын
Did I miss the DIY ADS-B video? The range scope was a nice addition.
@kokman622 жыл бұрын
Hi Bruce just off the subject, just broken my Elevator of my fms foam how or what the best way to fix and what would you recommend cheers Robbie
@BillStraub3032 жыл бұрын
Very interested to hear about earnings, most won't talk about them. I would think news on this channel and mainly shenanigans on Xjet. But some may only subscribe to one or the other, so perhaps a mention of the upcoming news on the Xjet channel.
@whidzee2 жыл бұрын
Now with your more powerful computer, I'd love to see you reviewing some simulators. especially as your winter is coming and you're unlikely to be out flying as much. I think you'll love Wings Sim
@dexxeve94202 жыл бұрын
I say mix the news and info i say. A lot of youtubers incorporated news segment into their you-tube channels and i think they their overall channel grew. But i like rc news, so be great to flip to this channel for that too
@airplanenut62422 жыл бұрын
I think I’d vote for news on this channel
@TopCrinkly682 жыл бұрын
Still need a PID explanation and how to use!!
@petergof2422 жыл бұрын
may I ask what's the rtl-sdr dongle for?
@oak30762 жыл бұрын
Thanks for all you do Bruce. Just wondering if you watched the last court video from the RDQ vs FAA? It is really important. A government employee swore under oath that we already meet all the criteria of remote ID. She stated very clearly, as other FAA representatives have also done, that Remote ID is the same as a license plate. Yes, a static material with absolutely no transmitting or receiving capability displaying a written number. This is wonderful, just a magic marker is all you need to comply. Or did they commit perjury and perhaps conspiracy to commit fraud?🤔😂😂
@CliffHarveyRCPlanes2 жыл бұрын
I like both your Channels Bruce but I watch Xjet more I guess, I usually watch during meal breaks as I've just done with this one over breakfast (it actually helps with digestion!). Now I'm wondering what's coming up that's game changing? Could it be a 'new' rubber power source 🤔😁
@peteengard99662 жыл бұрын
I really enjoy your videos. You used to do a weekly news video. How about another chanel with a once a month publication called RC news from the other side? Meaning that you're on the lower half of the world from what I would imagine most of your viewers are north of you.
@ruellerz2 жыл бұрын
Thanks for the insight that is a good point regarding the longevity of videos and view income. If I had a channel that'd drive me nuts on what to bother recording and editing etc. Ohms Law, RF. Hmm what other whiteboard sessions could you do...
@stefanthiselton54902 жыл бұрын
hello from Perth WA mate, gotta say really have learnt alot from your videos and really appreciate it. recently started building a new model and have some electric retracts and using a ubec within my install. question is, how do you run wires around that little ring thingy properly and im guessing its a type of insulator. the instructions arent overly clear for each product. once again i appreciate you and your videos, very informative man, thank you for your efforts much love stefan
@sylvanlight1202 жыл бұрын
Thanks for the heads up on the upcoming video. Yeah, I think the 'news' fits this channel more than XJet. Anyway, that bloke who does that XJet channel isn't as nice 😁 (sorry Bruce, joke.)
@juha1to62 жыл бұрын
NZ is still one of my favorite country
@haroldland46202 жыл бұрын
I can sense Runcam fastposting the latest to you ! * the image on the screen behind you is flashing Bruce
@robsycko2 жыл бұрын
I would migrate the news to the model reviews channel
@tbabajan2 жыл бұрын
HELP! I’m wanting to mount maybe a split cam on the under side of the brim of my helmet while falling timber. Are there any 4k cameras with on board DVR that might work well?!?!? Apparently nobody else has thought of this, lol
@nimrodquimbus9122 жыл бұрын
I think you should just do whatever you want, I watch both channels.....
@dexxeve94202 жыл бұрын
You have a pretty smooth Radio voice. Have you ever thought doing radio, with that slickly, smooth, deep voice ? Money maker there perhaps
@RCModelReviews2 жыл бұрын
when I was younger I was told (by someone who was in the radio business) that I had the perfect face for radio and the ideal voice for print. :-0
@dexxeve94202 жыл бұрын
@@RCModelReviews Well he obviously has no ear for a great voice. Never too late
@billbollinger73052 жыл бұрын
Oh I been watching u for long time lol we're close in age I am 64 lol! I will keep watching, heck I see all ur videos. Hey u get that radio master transmitter? I got one in mail waiting on it. Like fact it can run just bout every receivers that's out now. Well keep the information coming 😂 do a review on that transmitter! Keep em coming!!
@JJ-be3oy2 жыл бұрын
thanks, btw what is that raspberry pi setup in the background ?
@RCModelReviews2 жыл бұрын
That's the development system for the ADSB alarm. I have another that I use every weekend at the field which is the test unit.
@MrFowl2 жыл бұрын
I think news here makes more sense
@muntee332 жыл бұрын
Can U please do a video on fpv TX safety? Seems a bit concerning people are sticking transmitting antennas on their face without considering the possible health implications. Especially with some relatively high power transmitters and/or long range tx. Chur bro✌️😄 Can people use cables (and supporting hardware/ upgrades) to place the antennas away from the body? Or can low power, 'repeater antennas' be used on fpv goggles with higher power transmitting antennas on a pole, or ground/base station? (If any inherent latency in such a system does not become a critical concern) On a side note: I am very interested in developing an FPV setup that can effectively trick the mind into momentarily believing the experience is real. (To go to a remote area, away from any flight paths and such, and live out my dream of cloud surfing in a fast jet.) In particular, VR/AR goggles with a fov/dov that surpasses our natural ranges, + near photorealistic capabilities for any augmented imagery. (+ head tracking system for the gimbal mount of a super low latency,
@FlyturboKwad2 жыл бұрын
WOW, .25 cents an hour! All that before income tax! Amazing, won't be quitting my day time job anytime soon. Thanks for all you have done, literally for free. I'm curious about that Pi like board in the background with the attenta on it. What are you using it for?
@FPVUniversity2 жыл бұрын
Bruce, you have RTX, you are a wealthy man now! Ferraris are so 1990 badge of richness
@CrazyOregonBeaver2 жыл бұрын
Do you have a ZL1 ?
@MnPaul12 жыл бұрын
I get the ohms law video recommended a lot of times for me.
@maxair4202 жыл бұрын
👍🏽
@AndyDreadFPV2 жыл бұрын
Here's an experiment. since i'ts news how about just uploading the news to both channels here and xjet? since i miss notifications from either channel frequently i think the chances of not missing the news would be greatly increased for people out there living in a sea of notifications like me and would rather not miss the news.
@barrygiblett71802 жыл бұрын
Still waiting for my ATSB/ACARS receiver kit, you can earn more than $4.00 / kit... please Bruce put it out there for me... cheers Baz...
@peterfelecan36392 жыл бұрын
To answer your question about where to discuss the news in the domain, I think that the RCModelsReviews is the best place.