Running hard lines! Redcat Ascent on Desert Coyote chassis. Part 2

[@Frankredline]

Some serious side hilling nice

[@NE_RC]

my terrain in the northeast is completely different, but I think my Power Wagon could hang 🤙🏼

[@HobbyDrop]

@@NE_RC I believe that! Those power wagons tend to be nice builds :)

[@WandererOfTheDesert]

About 80%, my Capra could do it. But right now, it's a pile of parts. Getting ready for Pro-Line. Stay safe, my friend

[@HobbyDrop]

@@WandererOfTheDesert dude you gotta get that thing back together! :D thanks for the support

[@WandererOfTheDesert]

@HobbyDrop I'm working on it right now, heading to Pro-Line in 2 weeks

[@Matt-it8jh]

Do you run a bec? When i took the servo off my crawl master mini it helped alot. And i bet my trucks too wide for that ledge. I run capra axles under my redcat.

[@HobbyDrop]

@@Matt-it8jh I think I’ve got issues with binding somewhere. I tore this rig apart with the motor disconnected and rolled it around….found a few issues but it still doesn’t roll smooth if both drive shafts are connected.

[@jasonlund4750]

9 tooth pinion

[@nickbreen849]

And if you are running a revolver did you 4-link the front?

[@HobbyDrop]

@@nickbreen849 no I haven’t 4 linked the front. I have thought about it, but then I’d have to modify links and stuff too

[@nickbreen849]

@@HobbyDrop if it’s still stock links just order the stock front links again and you got the other side. On the stock chassis there is a hole to 4 link it

[@nickbreen849]

That chassis a direct bolt on for the ascent?

[@HobbyDrop]

@@nickbreen849 not on purpose. Haha. I had a lot of help from Cameron (desert Rc himself). Cutting and drilling the chassis to make it work. But it’s all ascent parts!

[@Toodles77]

If smaller pinion doesn’t fix it replace ur motor/ESC

[@HobbyDrop]

@@Toodles77 my pinion is only like a 12 tooth I think. Would you go even smaller?

[@philthy5058]

I'm intrigued by your cogging issue. I'm running 4 of those Holmes systems and they don't cog at all, I've never even plugged in the programmer. Either your gearing is really bad or maybe you got a bad esc.

[@HobbyDrop]

@@philthy5058 yeah I feel like there is something wrong with cause I’ve only heard good about these. But I’m struggling!

[@thathobbyguy6135]

​@HobbyDrop have you checked all your bearings?

[@HobbyDrop]

@@thathobbyguy6135 in the axles? I mean, I guess I haven’t checked anything haha.

[@thathobbyguy6135]

@HobbyDrop try taking the pinion off and Make sure the truck rolls smoothly

[@HobbyDrop]

@@thathobbyguy6135 it should still have resistance tho right? Just cause it’s a revolver?

[@jasonlund4750]

My rig can easy 1 shot all thoes lines. Everyone knows this 😁😁😁😁😁😁

[@HobbyDrop]

@@jasonlund4750 😂confidence is key

[@jasonlund4750]

@@HobbyDrop very true. Lol hey u coming to proline by the fire??

[@HobbyDrop]

@@jasonlund4750 nah not this year either haha