Whats up peeps! Don't forget to use the Discount code jpcaptured on Runva's website for a 10% discount off all products! i'll see you you guys soon for the next install.
@nplivinoz9984 жыл бұрын
You make everything so simple to do thats why i love watching these how to vids, so easy to follow
@jpcaptured7994 жыл бұрын
Thanks heaps Jake, glad your enjoying the vids mate 🤙
@k4rhl2 жыл бұрын
Best winch install video on the web. Helped me immensely installing my runva 13xp.
@jpcaptured7992 жыл бұрын
that's awesome man!
@k4rhl2 жыл бұрын
No thank you! Id have been stuck without it :)
@macbain7230 Жыл бұрын
Great video, thanks for posting. My winch did not come with instructions, so I followed your guidance. Thanks a bunch!
@inspire4x4jacko674 жыл бұрын
I love how your videos are done out side in random places what it looks. Just shows how.simple most installs are usally. Ya dont need ya big flash work shop
@ChrisAnderson19713 жыл бұрын
Awesome, I was dreading the install of my Runva XP (I won it woohoo) but this video was so easy to follow and informative yet basic, tomorrow is the day ! Cheers mate, liked and subscribed for future videos
@jpcaptured7993 жыл бұрын
congrats on the win, that's awesome! get it on the rig then you can go and test it in the bush.
@rossaddy704110 ай бұрын
Hi guys putting the bracket on the bullbar not a problem, however attaching the control box to the bracket. It has drilled threaded holes on the back plate but no screws to attach. Pls advise
@ethanbatt55834 жыл бұрын
Looking forward to picking up my np300 in june your channels getting me excited for the navara goodness, awesome channel mate
@jpcaptured7994 жыл бұрын
Mate you are going to love it! I will be honest when i purchased the Nav i wasn't expecting to like it as much as i do! Nissan have done well with this model 🤙
@stolzhammer32394 жыл бұрын
Simple. Straight forward video with all the content. Well done.
@jpcaptured7994 жыл бұрын
Thanks mate ✌️
@sebastienwattelet24144 жыл бұрын
cheers for this, ive just purchased the winch using your discount. cant wait to put it on my uneek 4x4 bumper bar on my jk jeep wrangler. great video big fella.
@SalvoDan2 жыл бұрын
Your vehicle has a Smart Alternator and a sensor on the negative terminal for determining how hard it should work. You have connected your winch direct to your negative terminal. This will mean that your Smart Alternator will not be able to compensate for increased battery load while winching and you will flatten your battery, even if your vehicle is running. You can lengthen your ground terminal with a copper bar to provide an earth location outside of the sensor.
@iDEMONiDEVIL2 жыл бұрын
Hi Dan, very good point and I want to learn more on the smart alternators as I am about to do the same winch install on my 2021 NP300. Would't the battery drain by the winch be picked up by the smart alternator and therefore compensated?
@SalvoDan2 жыл бұрын
@@iDEMONiDEVIL The current sensor on the negative terminal is what tells the alternator to “work harder”. As long as all the loads are on the outside of this terminal, they will be detected and the alternator will provide more charge to the battery. If there is a load on the inside of this terminal, it will not be detected and the alternator will plod along, providing enough charge to condition the battery and it will eventually make up the shortfall. Having battery drain that isn’t detected and compensated by the smart alternator would be similar to running the winch without the engine running.
@krump74294 жыл бұрын
Cool video super clear instructions the runva winch looks sick. Going to be annoying if ever need to remove that grill in the future though with the cables running through the grill. Should of done it underneath it. Get ya self a number plate flip bracket, to solve the issue of your number plate being in the way, just flip it up when ever ur winching 😀
@timarmstrong24162 жыл бұрын
Great video mate , installing mine tomorrow
@shafkarim84864 жыл бұрын
Good job mate. Thank you for making this videos and your hard work.
@jpcaptured7994 жыл бұрын
No worries at all, glad your enjoying the content 😄
@jackrobertson46354 жыл бұрын
Great vid mate👍keep up the good work you should do a wiring up a light bar or spotlights install for the np300 that would be sick
@jpcaptured7994 жыл бұрын
I'm looking forward to getting stuck into wiring man, but I'm waiting on something special to rock up before i start 😁🤘
@joshtaylor60033 жыл бұрын
Cheers for the video mate, made installation a breeze 🤙
@jpcaptured7993 жыл бұрын
No worries 🤟🏻
@shanejohnson57Ай бұрын
Also ime lookin at a dominator for my 100 series with an arb bar so appreciate the install info
@mikehenry5961 Жыл бұрын
Thanks. Super easy to follow :-)
@jpcaptured799 Жыл бұрын
No worries, thanks for watching! Don't forget to subscribe 🙂
@petermiller86342 жыл бұрын
Great tutorial thank you. Subscribed & looking forward to more videos 👍
@twake344 Жыл бұрын
Had this winch installed a few days ago, but they didn’t install the isolator switch (installer said “you don’t need it”). So obviously this switch allows you to power the winch only when you want but my question is - what is the purpose of doing this and is it really needed or not? Great video mate, cheers.
@Ooi-bi3yn4 жыл бұрын
love your video...good job mate👍👍👍
@jpcaptured7994 жыл бұрын
Thanks man, hope your Nav build is going well 🤙
@Luca-jv1gp8 ай бұрын
Hey mate just one question it’s all installed do I need to wend the cable under pressure or just let ot wend it itself? Thanks
@dustycups2 жыл бұрын
I want to hide the control box inside the bull bar (Opposite Lock). My 11XP premium was installed years ago and the mounting bracket to attach the box onto the winch is long gone, I just have the V bracket on top of the bar. What does that bracket look like, and where does it attach to the winch? I can't find it on the Runva website to buy.
@tristanloveday52402 жыл бұрын
Thanks for the wireless remote instructions! Runva seems to be a bit skimpy on included instructions. Just a comment regarding the wiring. Have you cable tied any of it? You mentioned cables rubbing through but didn't mention securing it from moving. A lot of auto electricians I have talked to recommended every 20-30cm or less securing it. I also watched a video recently on installation tips and split conduit is a cheap and easy way of protecting all the cables from running through.
@jpcaptured7992 жыл бұрын
no worries at all. Funny you say that i recently went through all of the winch wiring and re-did it with split sleeve all the way through and a few P clips holding everything down.
@tristanloveday52402 жыл бұрын
@@jpcaptured799 it's good peace of mind 👌
@alexshapter2 жыл бұрын
Great guide ! Helped a lot
@xgw4412 жыл бұрын
Good video mate, looking at getting one of those Runva wireless winch remotes. Do you find theirs much lag/delay using that opposed to the wired hand piece?
@jpcaptured7992 жыл бұрын
Not at all, the wireless remote seems to actuate the winch as soon as i press the button.
@IIGrayfoxII2 жыл бұрын
I have been helping a co-worker install this winch. The solenoid ground wire gets hot and the winch clicks while releasing or spooling up the cable, the solenoid ground wire is connected to the winch ground point. The winch has the 35mm2 ground cable connected directly to the battery. The battery is a 810CCA. I checked all ground points and they're tight Resistance from winch ground point to neg battery post is about 0.3Ohms I cant figure out what is causing this issue
@frazhussain9195 Жыл бұрын
such a clean and unscratched bash plate, do you even do 4wd?
@jpcaptured799 Жыл бұрын
You should see it now 😂 it's not so clean and definitely scratched.
@CameronKennedy234 жыл бұрын
Arb number plate flip bracket 👌
@jpcaptured7994 жыл бұрын
Sounds cool! Do you have a link?
@CameronKennedy234 жыл бұрын
JP Captured sorry no just walk into arb it’s a universal fit $90 from memory
@jpcaptured7994 жыл бұрын
@@CameronKennedy23 nice one mate cheers.
@user-te2ob7jc4x3 жыл бұрын
Hi mate I have fitted Arb Summit Bar On my Prado 150. If I want fit this winch in, Do I need to take the whole bullbar off or I can just mount like you did. Thanks
@donpaterson23974 жыл бұрын
I'm surprised it's not fused off the battery
@SalvoDan2 жыл бұрын
You are correct that you shouldn’t have an infused cable running though your car, especially in an impact/crumple zone like in a bumper or bull bar. The problem is that winches pull a lot of current. Even a 300A Maxi-fuse may blow under normal usage, and since a winch is an emergency device, it is usually subjected to abnormal use. The isolator switch serves the purpose of a fuse, but needs to be managed by a human. You need to have your winch isolated when not in use. Some people still install with fuses, some use remotely controlled solenoids and some people use Anderson Plugs. Runva, Carbon or Warn should manufacture and include a sealed unit fused, isolation switch capable of handling the current, but that would increase the cost of the package by at least another $100.
@madelyncameron78833 жыл бұрын
Did you have to put new heavier rated shockies on the front of the car to cater for the weight of the winch?
@jpcaptured7993 жыл бұрын
yes, my suspension is setup for the weight I carry and accessories.
@heathp73783 жыл бұрын
Very helpful video 👍
@jpcaptured7993 жыл бұрын
Cheers mate 👍
@bradneville20214 жыл бұрын
Awesome
@1234talf3 жыл бұрын
Hi mate, great video. I had my Runva 11XP winch fitted last Monday. I hadn’t used it at all. I crossed a creek wheel height. 30 mins after crossing the winch activated on its own and pulled against the fairlead to the point that it twisted my brand new TJM bull bar. Have you had any issues using this winch while going through water at all? Cheers
@Billy-te9lm2 жыл бұрын
Best to isolate when not in use mate, I had problems with my winch with water. Wasn’t a runva but my wired controller only worked going out not in, and my wireless control worked fine. Also on the day it happened the winch would randomly spool my cable out, I let it dry out and didn’t happen again but that’s when I had the controller issues
@gonyg53162 жыл бұрын
It still blows me away that companies waste time and money offering a normal and premium version of the same winch with the main difference being water proofing. Why bother. There should not be a choice. It should just be the best most waterproof unit that the company can produce and for anyone tight arsed enough to buy the cheaper version just because they want a winch on the car then these are the people that deserve to get stuck and have the winch fail at the he most critical of times. A winch is not one of those items that should be determined purely by budget as it can be the difference between life or death.
@lachlangray20384 жыл бұрын
Do they have a breather like a diff breathet
@mattyj32114 жыл бұрын
Hey mate any reason why you didn't take the multi coloured cables through the grill so there out of sight?
@jpcaptured7994 жыл бұрын
Hey man! The cables were too short to reach around. I think after i put some conjute over them it should hide them a bit better 😁
@mattyj32114 жыл бұрын
@@jpcaptured799 I have same car, bar, and winch and went through the grill just thought there maybe a reason that you went the other way that I should know about. All good mate keep up the good work👍
@jpcaptured7994 жыл бұрын
@@mattyj3211 true! Did you have to lengthen the small earth wire? Or did you earth it on a other spot? That was the cable that was limiting me.
@steviebee19893 жыл бұрын
@@jpcaptured799 *conduit
@zahirzakarya4716 ай бұрын
Price sent to country
@smurik13 жыл бұрын
I bought today 702$ 11xp-s 😃😁
@jpcaptured7993 жыл бұрын
mint 🙏
@maxsky34433 жыл бұрын
Hi do you have workshop? If yes i'll drive my hilux for you to install