Rusty Angle Grinder Restoration | Ryobi Angle Grinder

This is Ryobi brand angle grinder restoration video. The machine is very old, stuck and no longer works. I bought it at a thrift market and had the idea of ​​​​doing a restoration. So i'm very happy to receive your feedback, advice, suggestions to improve myself.
--------------------------
Like and subscribe to support the channel ^^
Thank you so much for watching !!
Have a nice day ^^
#restoration #restorationvideos #anglegrinder #cuttingmachine

[@garymucher4082]

Any time you can refurbish an older power tool, it is a great thing. You get to use the newly refurbished tool and it doesn't end up in a landfill... Thumbs Up!

[@hbrestoration]

Thank you 🥰

[@JonnyLionMan]

I had a lot of old pipes and rebar to cut up and from what I read kzbin.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.

[@hbrestoration]

Although I haven't used it yet, I find it really a good tool

[@vladimerdarjania7157]

Good video.👍👍👍👍👍

[@hbrestoration]

🥰🥰🥰

[@user-it6of8yo4x]

Товарищ, прежде чем вытаскивать эту часть электро инструмента, надо прежде было вытащить щётки и открутить от механики электрику, тогда бы и корпус ломать не пришлось бы.

[@hbrestoration]

Да, спасибо за ваш комментарий. В следующих видео постараюсь сделать лучше ^^

[@alexeyminkov2366]

> 12:50 На зубьях шестерни явно появился отпуск, частичный. Ресурс зубьев будет немного снижен. > Проверка ротора и статора (17:20-18:00) тестером насмешила - поспешные замеры с различающимися в разы параметрами 🤣 Ну блин - куда спешить?? Выглядело, как будто "для галочки". > А что это за состав на винтах, крепящих статор к корпусу (18:48)?? Смазка?? Тогда это - верх дилетантства - винты при вибрации ослабятся или вообще выкрутятся - с этим нежелательным эффектом конструктора борятся как могут.. Фиксатор резьбы? - Только если лёгкий - чтобы такую длинную и тонкую резьбовую пару потом при повторном ремонте можно было раскрутить. Надеюсь - это не смазка... хотя по виду очень похоже на тот состав, чем был набит подшипник (22:00)

[@hbrestoration]

Спасибо за просмотр видео и комментарий. Это ценные комментарии. Я постараюсь сделать лучше в следующих видео ^^

[@tolyn8060]

Ну что тут можно сказать?.Колхоз-дело добровольное.

[@andrzejporeda7281]

Przepiękne jest ta cała kontówka odrestaurowana ale mojom bym szybciej bym przecioł pozdrawiam serdecznie 👍👍👍👍👍👍

[@hbrestoration]

Thank you 😊

[@user-ft2cb6ds1f]

Де захист на ріжучому диску....?????????

[@hbrestoration]

Я їх не встановлював 😀

[@user-li8pg9kf7o]

учебный фильм, как не надо ремонтировать электроинструмент

[@hbrestoration]

Thanks for your comment. I will try to do better in the next videos ^^

[@tombarlow6176]

Only good for scrap

[@qaoukbeautycenter8515]

Hello my friend I have a question and I would like to know the answer from you because you are the best I have an Angle Grinder made in China that was working fine Suddenly, the metal section in it heats up a lot and in a short time I changed the Romans and lubricated it well But it still gets very hot I would like to know the reason and how to fix it please Thank you very much

[@hbrestoration]

Thank you for watching the video and asking me questions. From your description I think the cause of the heat is the rotor and stator rubbing against each other. You should check the bearings or the bearing housings, they may be worn

[@mertsmayor]

Hellow sir can i bring to you my old angle grinder to restore. But stil working only maintenance and paint

[@hbrestoration]

where u?

[@mertsmayor]

@@hbrestoration philippines

[@abdulwahid8579]

Good job 👍

[@hbrestoration]

thanks ^^

[@hoanghuybui40]

good job 😍

[@RestorationAustralia]

Well done.👍

[@hbrestoration]

Thanks you very much ^^

[@thepoopsoup]

I removed the head of a brand new Porter Cable angle grinder to drill and install a zert fitting so it may be greased during its life.

[@hbrestoration]

♥

[@user-ys8os6hj9d]

Performance evaluation in cleaning internal and external parts was only 70%.

[@robertobezerra8376]

Trabalhos top Adóro tmj 👏👏👏👏👍👍🇧🇷🇧🇷🇧🇷🇧🇷

[@hbrestoration]

Thank you very much ^^

[@abdultahsin6414]

Utt j t f see too j to for a while now I yyyyh. Ppu distrustfully jujhhytd the o

[@sounasamdy8303]

You damaged the Mini pignon. Should not use Hammer just open the little screw closing on the little pignon

[@hbrestoration]

If it continues, it will be damaged. I just tried to restore it with the tools I have

[@gearstory1697]

great ❤❤❤❤

[@hbrestoration]

Thank you very much ^^

[@Cetrifuga1945]

O piacere x la ragazza con la progenia la vedo felice speriamo che un domani vicino ci siano almeno dei miglioramenti 🙏ci vuole un miracolo chissà

[@hbrestoration]

Grazie per aver guardato il video, buona giornata ^^

[@user-akwaisrael]

С одной стороны ты чинишь поломанные инструменты,но пользуешься собственным запущенным грязным и ржавым.Видно что это делаешь только для контента,ты не любишь свой собственный инструмент

[@hbrestoration]

Maybe you watch other channels and get cheated but this is the machine I bought at a junkyard :(((

[@user-akwaisrael]

@@hbrestoration you didn’t understand me, your own tools with which you work are very neglected. You are a professional!

[@Vlad-ob2ts]

3-й сорт - не брак...

[@hbrestoration]

Спасибо за просмотр и комментарий. В следующих видео постараюсь сделать лучше

[@user-xc6xk2dc3w]

Не ремонт, а так, скидав до купи одним словом хлам

[@hbrestoration]

😂

[@andrewgeorge5805]

I wouldn’t even use it cause you not replacing old parts on it 👎🏿👎🏿

[@hbrestoration]

there are some parts that still work fine so I don't replace it

[@hbrestoration]

I still use it in all my work now

[@billgeorge7804]

Been an engineer for over fifty years and I’m satisfied that this is a good rebuild. You don’t put a new engine in if all that your car needs is a head gasket, the same applies here. If parts are serviceable, they can and should be reused.

[@user-me6eo2pv6m]

Покрасил и потом молотком по ней.. 🤦

[@hbrestoration]

i"ll try to do better in the next videos 😪

[@latakasa1759]

👍👍🫶🫶

[@latakasa1759]

🖐🖐🖐🖐🖐

[@latakasa1759]

👍👍👍👍

[@hbrestoration]

@@latakasa1759 hiii

[@jHammad3]

I don't like your methods of opening machines. And with what happened in that video in minute 3:20 I felt a rage, I think I hate you. .

[@hbrestoration]

Thank you for watching the video and commenting even though you don't like it. I will try to do better in the next videos

[@safadischone1956]

You should removed the cover

[@hbrestoration]

Why???