RUSTY CHAINSAW RESTORATION - Stihl 017 GASOLINE CHAINSAW - PART 1

RUSTY CHAINSAW RESTORATION - Stihl 017 GASOLINE CHAINSAW
In this video i will restore my 22 years old Stihl 017 gasoline chainsaw. It was coated by rust and dust. Have fun...
I hope you will enjoy with my content. Please like, leave comment.
You Like My Original Video. I would appreciate if you support me by sharing the video.
Turn on subscribe and forget to be right now from the videos uploaded to our channels
SUBSCRIBE MY CHANNEL FOR FREE► shorturl.at/tMUV7
My Next Video ► • Video
My Previous Video ► • Video
And If You Want To Check Out My Other Videos ►
/ @masterwork
Thanks for watching
#restoration, #gasolinechainsaw, #chainsaw,

[@MasterWork]

İzlediğiniz için teşekkürler. '' Abone olmayı '' unutmayın Thank you for watching. Don't forget to ''Subscribe''

[@ruziybs3168]

Abi turkmusun

[@alexcronkhite9404]

I think the funniest part is the chain being on backwards

[@MasterWork]

Yes, definitely. Just carelessness ahaha 😁😁👍

[@darrellpickering8535]

Over the years I've been working on saws, you'd be surprised how often the owners would come in with complaints of the chain won't turn, it won't cut or it won't start. The 1st is the chain brake's on, the 2nd is the chain's dull & the last is usually they didn't read the manual on starting. Some people shouldn't be allowed to use such equipment, no mindset for it. I know people who have used saws for many years & still got hurt. I know of cases where they used no mix at all & then wanted warranty. If there was warranty performed, the dealer did it on his own. That led to problems b/c anything from that point on was expected to be fixed free. Then there was the chain's on backwards & IT CAME THAT WAY! Sure it did! I could go on & on but it'd be boring. Some were legitiment complaints but but the ones that weren't far outweighed those.

[@darrellpickering8535]

Many years ago a guy came in & set his saw on the counter. Never saw him before & the more he talked the madder he got. The saw was an Xmas present from the year before & had never been started. As he pulled it out of it's case, it was covered with mud. His son had used it, w/o permission, to install an electronic dog fence & it came back to dad this way. Dad wanted it fixed & the bill would be paid for by the son, lol! It took a new chain, bar & sprocket plus a thorough cleaning. Never saw that man ever again. Btw, it should've worked fine for the dog fence.

[@sandorfeher5757]

perfekt

[@OmeqLeHackeR]

Part 2 yi bekliyorum canavar gibi çalışr inşallah

[@mus6765]

Umut kardeşim eline sağlık Bunun toplama videosu var mı

[@burakergun4669]

Daha çok video gelsin 👌🏻

[@farukcevik9626]

Devamını bekliyoruz 👍

[@chriscole1480]

Why is it the first thing i see if the chain on backwards?

[@leolean1517]

Perdón, presioné dislike sin darme cuenta, pero ya lo corregí y di like 👍

[@darrellpickering8535]

The 017 is the older version of the 170. 30CC & with a 16" bar which put it @ the end of it's power band. Better with a 14". They were the entry saw of Stihl back then. Cheap was the word & they weren't great on longevity. If you find 1 used that has compression above 130, it'd be a good saw.

[@bilalyilmaz4740]

Tm

[@MasterWork]

thanks for nice info :)

[@darrellpickering8535]

It's a common practice for some brands, especially the smaller & cheaper saws, to come overbarred with a skip-tooth chain. Marketing ploy, that way the customer will think they're more saw for less price. Poulan used to do that & it cost 'em in the long run. When they manufacture something so cheap that it looks too good to be true, it usually is.

[@andyprice5882]

I just picked one of these up for free, it has good compression and spark but the only trouble I have with it is that it floods every time I try to start it and the exhaust fills with petrol. I'm gonna have to find a manual online and see what I'm doing wrong... interesting comments though.

[@veyselaltundag47]

İşe yarayacak video 👍

[@josecoelho5581]

Sthill melhor motosserra do mundo

[@alexdurama3112]

Husqvarna igualmente...

[@juraijmohamed1293]

Hi ,bro,

[@raimonchannel]

good job

[@onurozturk1363]

👍🏻👍🏻

[@vanmuoitruong3758]

great

[@MasterWork]

Thx for comment, cheers.

[@mustafakulah3706]

Başarılar

[@ikikafadar8043]

Başarılar efendm

[@Mechanicalcircus]

The reason most people can't operate equipment is because everything they need to know is in the owners manual.

[@juraijmohamed1293]

Ms 170 & 017 are same ?

[@Motospas]

Мені попалась така, розібрав на запчасті

[@martins4769]

how many rollers are at the rod bearing

[@전자발찌삼촌]

퍼갑니다

[@ІванТатарин]

Ляше я замітив що ланцюг не тою стороною заложений😂😂😂

[@misaisak1347]

Не ти один

[@DedPalovskii]

Все заметили как цепь установлена?

[@MasterWork]

Да, это вверх ногами. Беспечность. 😁😁

[@jamessikes3288]

Csan I get a 25 year old McCullough Titan 57 repaired? Impossible they say ?

[@phoenixbleat]

Так только олухи разбирают ...)

[@savassavrum8623]

Zincir pasını çıkarmak için Ne kullandın

[@OmeqLeHackeR]

Coca Cola kullanmış ustamız

[@LifeinVillage]

çok güzel bir çalışma olmuş. buarada izleyen arkadaşların benim kanalıma da bakmalarını tavsiye ederim, ben de güzel içerikler yüklüyorum.

[@francechabot8529]

omg please on the video you show us very clearly the coil but it's dirty i can't read the number ..... it would be nice if you can take a second to pass your finger on there and show us the number. meanwhile does anyone have it ? i can't find it on the internet anywhere and that's the part I'm looking for.. please anyone and thanks

[@Евгений-т9ъ7е]

Руки просто вырвать хозяину пилки!

[@dizzeller]

Хозяин пилы тут не при чем. Посмотри видео Доктор Дью " всратые рестовраторы " и все станет понятно про такие " восстановления".

[@sergeimironov29]

@@dizzeller Согласен недавно про таких горе рестовраторов на канале Евгений Белгород тоже было

[@sorochenko499]

Сцепление так просто открутил без усилия 😂😂бензопила перед записью видео была неоднократно разобрана и собрана !

[@soulfly9021]

Türkler restorasyonu beceremiyo aga amerikalilar daha guzel cekiyo videolari

[@MasterWork]

elimizdeki imkanlarla anca bu kadar oluyor.

[@NONAME-tb1ss]

apparently they hadn't seen what a 22-year-old saw looked like

[@J4D97]

I have one of these that I found in my grandads garage after he passed looks like it’s only been used a handful of times starts up like new

[@yunuskarakus6105]

Güzel makina ama zinciri kim takmissa ters takmış

[@MasterWork]

bozulunca bir kenara atmışlar ben de alıp bir restorasyon yaptım şimdi canavar gibi makine oldu benim aldığımda o haldeydi

[@РадикГиматдинов-ж8г]

Можно было просто отмыть хорошенько и всё! И свежий гсм! Видео ни о чем

[@misaisak1347]

Я один замети что здесь не хватает запчастей?

[@bilalyilmaz4740]

Amin

[@suelibarbosa3804]

Algum br kkkkk

[@gibmelson7628]

good video, good job ! but it s not necessary to show every part....

[@Викторлаббар]

180 штиль😂😂😂

[@ozgurnohut1037]

saw is wrong on it m anfanf. no wonder it was lying in the corner, dusty.

[@knatterkiste2440]

Ist cant be 22 Jears old

[@jameslakes5019]

Not worth rebuild o17

[@NONAME-tb1ss]

Pure lie is so old

[@danielpetit2059]

Zzzzzz

[@gagharutyunyan27]

Հիմարություն😛