Rusty Exhaust Pipe and Muffler Replacement on a Citroen Saxo (Plus Rear Reg Plate Bulb Replacement)

Citroen Saxo
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done at your own risk. I will not be held liable for any injury to yourself or others or damage to your firearms or any equipment resulting from attempting anything shown in any videos.
#manifold #catalyticconverter #automobile #exhaustpipe #muffler #exhaustpipe

[@Baudilio269]

I need to dismantle the steering and repair it, mine doesn't work, it's very hard, thanks for the video, it will help me a lot.

[@EdAtoZ]

Car repair, My American Standard furnace uses 11/32 hex allen screws to hold down the blower motor. Well I finally got a 11/32 hex bit socket. The Koken 4010A.60-11/32 Bit Socket 11/32 Hex 60 MM 1/2 Sq. Drive. I have two 3/8 drive body ratchet with 1/2 dr heads. So If it goes out again I am ready. One thing mention the Koken hex bit have a sharp corner on the hex, no small radius, I really like that.

[@carrepairandtoolsvideos]

That sounds interesting. Now I am thinking to get some more of Koken tools. Thanks bro for sharing your experience

[@EdAtoZ]

@@carrepairandtoolsvideos if your looking for the very best hex allen socket it would be the RBRT bit. They have teeth to cut into the screw. the Ko-ken hex I have is just this one size, but no micro radius in the corners.

[@EdAtoZ]

Car repair, What was that black thing you attached to the muffler at the start of the video before breaking that first bolt ? Last time I did this type of work I broke all the bolt and rubber hangers.

[@carrepairandtoolsvideos]

It was flash light. I was prepared for the broken bolts. I had all my spare bolts and brackets.

[@EdAtoZ]

Car repair, At time index 5:45 it looks like your back jack stand is not touching anything. So I assume you have the jack on this side and one jack stand on the other or was it two ? I have had two jacks give out on me in the far past. I just don't trust them.

[@carrepairandtoolsvideos]

Yes, I had 3 jack stands. One was not touching due to uneven surface. But I was bit scared 😃. It started to rain so I kept going to finish up the job.

[@HAYYANHani-ql1jo]

where is gloves

[@carrepairandtoolsvideos]

Some time I do that