Rusty Impact Driver Restoration | Makita 6919D

[@alanerickson3075]

The old Makita tools were really well built their only real weak point was those crappy Ni-Cad batteries. Because of your very excellent videos I have been cleaning up and rebuilding all of my old cordless tools and repowering them with modern lithium batteries. I find this to be just as satisfying as watching your videos, thank you sir.

[@gear_show]

I'm so happy to hear that, thank you!

[@Da_nick_]

I hope that one day they will make them as sturdy as they did back in the day. But obviously with a brushless motor

[@alexandres8846]

The nicd or nimh batteries were not bad, the problem was that there was no protection circuit.

[@markphillips6154]

Love the top to a turntable being used as a plastic container for cleaning stuff. Nothing like recycling

[@gear_show]

I totally agree!

[@roberts1938]

It's nice that you show that sometimes something is not working properly and show symptoms of faulty work and what needs to be checked.

[@gear_show]

I'm so glad this help you, thank you!

[@danieljunior2382]

I would love to hear some lowfi beats. But I allways enjoy the videos, man cheers from Brazil!

[@Austeration]

Wow that think almost looks new again 👍 Brilliant job. I like the fact that you showed us solving the problem after it didn't work the first time. Nice one.

[@gear_show]

Yes, it is. I'm glad that this video help you :) thank you!

[@stachustachu4240]

I always watch you when I have a bad day or a lot of stress and you give me soothing with your films relaxation relax greetings Polish

[@garymucher4082]

Those impact power tools are amazing little tools. They look simple but back a huge amount of torque. And they are so small for that amount of torque they have as well. Nice refurbishing project. Thumbs Up

[@gear_show]

Yes they are! Thank you very much!

[@mustafabhopalwala4375]

Bro following you from 1k subs wanted to say just one thing love you bro just keep your content up👍 appreciate your hard work and efforts❤️ ly sir

[@gear_show]

Wow, thank you so much for always visit this channel.

[@miguelacevedo5796]

.

[@ALMORACEL1]

Thank you for all this creativity and the great benefit that we enjoyed. Could you please include during the video shooting the names of the chemicals and other substances that you use in your work so that we can understand them and benefit more 😍🙏

[@gear_show]

Okay, I will tell the names of the chemicals for the next video. Thank you for letting me know!

[@gokturkgokbayrak2310]

Bende katılıyorum sonuna kadar.

[@2003comix]

Well done, I like your works. You do it flawlessly.

[@gear_show]

Thank you so much 😀 I'm so happy to hear that.

[@kret63]

Very good job, as always. It's relaxing to watch.

[@gear_show]

Glad you enjoy it! Thanks coming back!

[@lagilbertona3599]

Yess Another Makita love Makita tools From the U.S.A

[@gear_show]

Thank you very much for visiting this channel!

[@selador11]

I have two of these exact same drivers. Not all rusted up. But well worn. Batteries were getting expensive. So I gutted a battery. Ran wires through it. (20 foot "zip" type extension cord.) And ran it off of a 12v battery made for a garden tractor. Battery, cord and driver all store in a squarish plastic cat litter bucket. The bucket makes it easy to carry the battery around wherever you go. And the length of the cord gives plenty of work area before you have to move the battery. (You could even make a carrier that would hang the small garden tractor battery from your belt.) It made a huge amount of torque compared to the factory batteries, and one charge on the battery lasted for an entire shed build. (Used all screws, no nails.) Unfortunately, I got one of them wired backward and burned up something inside the driver. No idea if I could even find those parts again. This same sort of setup will run an 18v drill/driver as well. It runs slower, but has a lot more torque than the factory 18v battery. And again, one charge lasts forever. Seems counter-intuitive to put a cod on a cordless drill/driver. But makes sense if you can't afford to keep buying new batteries for it. Plus because it is still a small battery, you aren't limited as much as you might think. Plus all that extra torque, and not having to change batteries out, all day long.

[@rabk5702]

It amazes me how he remembers where all the parts go nice refurb 😁👍

[@gear_show]

Thank you!

[@tranha2776]

Thích nhất anh sửa chửa và vệ sinh về máy bắn vít

[@gear_show]

Tôi vui vì bạn thích nó.

[@ITBR_Restoration]

Good result! I recently also restored an old power tool. For the project, I chose a Soviet grinder👍

[@jaskarnsingh5053]

Very beautiful and very unique work bro God 🙏🙏🙏🙏🙏 bless you.

[@gear_show]

Thank you so much! I'm glad to hear that.

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@gear_show]

Спасибо, что вернулись!

[@gprasadbelandur7876]

Sir your vedio is really supab and your makitha impact screwdriver is also so good where its available sir pleace tell me

[@TheYpavon79]

Excelente trabajo mi estimado!!!... Te Saludo desde Venezuela

[@Rezawithjesus]

Lo mejor que hay bro la restauracion y limpieza. saludos tambien desde venezuela

[@gear_show]

Thank you!

[@HelloAdam_]

Fantastic restoration, very technical! Thanks for sharing :)

[@yukioeto7070]

Excelente trabalho! Comprei uma idêntica aqui no Japão em loja de usados, paguei 50 dólares está praticamente nova, veio com duas baterias a caixa e o carregador, só que as baterias como ja tem muitos anos a saúde ja ta fraca, mas o resto tá tudo como novo.

[@scottgates601]

Wow beautiful restoration job! I'm about to restore some old makita electric drills myself. What did you use when cleaning the plastic parts? Some kind of washing powder and hot water?? Thanks!

[@황외수-l2b]

역시 오늘도 존경스럽네요 대단하십니다 👍👍👍👍👍👍👍

[@sivadigital1011]

hi my name siva from india Your videos are great Showing in detail .I ask one How To Clean An PC Motherboard, Due to cleaning well I think that would work better.It is very useful all over the world

[@levandinh3026]

Thật tuyệt vời,cám ơn bạn đã chia sẻ ❤

[@mehmetnurceylan380]

Very good working, İ'm very happy when i watching your videos. Thanks....

[@gear_show]

You're welcome, I'm glad to hear that.

[@RestorationAustralia]

Cool, well done Makita is my favourite tool.

[@gear_show]

Mine too!

[@markphillips6154]

It would sure be nice to know what you sprayed on the plastic parts. Was that some sort of clearcoat or something special for rejuvenating plastic

[@gear_show]

It is a flat clear spray.

[@kubikaza]

@@gear_show mate or gloss?

[@Amperekaefer]

👍, Schalter immer testen vor dem Einbau!

[@TruDu89]

Đây là lần đầu xem video kênh này, nhưng chỉ cần nhìn chiếc đầu khía cũ này, và cách tái chế này là tôi đoán kênh này của 1 người thợ Vietnam

[@duniaelekteronik2631]

hadir saudaraku pengiriman paket telah tiba.biar pun lain hobi tetapi video saudara sangat menghibur sekali lanjut mantap. salam sehat selalu.

[@amirrezazadeh906]

Excellent job i thought armature was the problem at the first second but you find out the problem like you always do I have a problem is there anyway to assemble the battery except welding device?

[@gear_show]

What kind of battery you want to assemble?

[@pp9856]

Hey, another great video. Can you please tell me the camera you use for filming? the quality is very nice!

[@justarideout]

Super Job Well Done, will the new battery still charge on the old NiCad charger???

[@ichbaumalwas5615]

no it wont. you have to modify the charger too

[@gear_show]

No, the new battery need to charge with lithium charger.

[@aldrinalejo1810]

Cute Armature BTW I love your videos

[@gear_show]

Thank you!

[@r-prorestoration9570]

You are on the next level Mate !

[@gear_show]

Thank you!

[@re-fix9678]

good restore👍👍

[@gear_show]

Thanks 👍

[@claudiozuniga9268]

Excelente Video y una hermosa restauración

[@gear_show]

¡Muchas gracias!

[@fallingwater]

You only need protection rings on the positive side of cells; the negative doesn't carry the risk of a short to the outer shell, so you can omit them.

[@funtoytoyschannel5676]

So amazing restoration, it is so perfectly

[@gear_show]

Thanks

[@robertonicolosipiva2646]

Top service. From Brazil

[@hamditarakci8063]

Kolay gelsin Türkiyeden yazıyorum. İlk etapta Bms seçimi aslında normal ama yine de anlık voltaj düşümü yaratan şeyin 18650 pillerin eksik oluşu oldugunu düşünüyorum. 6 adet pil eklemiş olsaydınız bu Bms devresi ve morotun anlık akımı için yeterli olacaktı diye düşünüyorum 👏👏👏

[@gear_show]

Evet haklısın. Ancak bu pil kutusu yalnızca 3 hücre yükleyebilir. Neyse öneri için teşekkür ederim.

[@hamditarakci8063]

@@gear_show Ben teşekkür ederim verdiğin cevap ve göstermiş olduğun ilgiden dolayı. Ayrıca çalışmaların çok güzel ve başarılı, devamını dilerim. 🙏😇

[@warm332]

Incredible craftsmanship as always! Glad to see you using the hot water again! Also, wet flattening the primer is always a good idea. Thank you sir for you terrific videos ☺️ I have a question, what is the name of the Japanese site you use to buy these old tools? Thank you again.

[@gear_show]

I bought those Japan tools from Japan recycle shop in my country.

[@avrel820]

Good job as always. You are the best :-)

[@gear_show]

Thank you for choosing this video!

[@avrel820]

@@gear_show i always watch what you do. I'd like to fix battery's and stuff like you do :-)

[@Yorumcu63]

Master I wrote a long comment that may be commercial ideas, it has not been published now I am writing a short one 1-You can also find cheap parts and non-working drills on auction sites and buy them. 2-In some regions, for example, carpenters and furniture manufacturers' shops are concentrated. You can easily find battery conversion jobs here. 3-You can get the authorized repair service of the big sellers of the big drill manufacturer brands (Dozens of videos on your youtube channel and more than 550K subscribers are more than enough for your reference) 4-You can try new LiFePO batteries in the process of renewing electric wheelchair and car batteries. When your business increases, don't quit sharing videos on youtube.😀

[@gear_show]

I'm really appreciate with your sharing with me. It is excellent business idea, again thank you!

[@shubham160r]

Hello love from india ❤️

[@gear_show]

Hello ❤️

[@barriewright2857]

What's the compound used to clean the plastic body of the power tool , could you tell me thank you. A Great show 👏 and very educational.

[@gear_show]

It is a detergent powder. Thank you!

[@barriewright2857]

@@gear_show Thank you very much for the information, and a great show more.

[@lion-e-nl]

I love your content :-) I would like to know though where you get the Makita battery sleeves or kit, I could use them myself

[@gear_show]

I'm glad to hear that, I bought Makita kit via this item.taobao.com/item.htm?id=600224439262

[@yeagerxp]

Excellent work 👍👍👍 . Thanks for sharing

[@gear_show]

You're welcome! Thank you 👍

[@jasonhuhare]

Great video. What brand of the grease do you use at 9:30? Thanks.

[@dendyfebianto4157]

great job 👍👍👍..I want to know what is the brand of battery cell, you use..?

[@gear_show]

You can find it in the description. Thank you!

[@dendyfebianto4157]

@@gear_show okay thank you so much

[@домовой79]

Great! Where do you get so many old tools???

[@gplusgplus2286]

Please make a video with rebuilding common old 12 14 and 18V batteries. Will they work with original charger?

[@gear_show]

No, it won't work with the original charger.

[@Yorumcu63]

Master, I have two questions. How many years have you been dealing with drill reconditioning? What is the approximate USD price of this refurbished drill?

[@gear_show]

Hello Pathfinder 1963 I have been dealing with drill around 2 years. I can sell a drill for $50.

[@Nguyent2477]

@@gear_show $50 ⁉️😱

[@Yorumcu63]

@@gear_show Amazing knowlodge level master Congrulations

[@Nguyent2477]

@@Yorumcu63 😇

[@dennywildann86]

very nice from Indonesia

[@buijantjung8401]

Good job 👍👍👍

[@LoftechUK]

Enjoyed that. Thank you

[@warlenmaldonado9978]

Observando seus vídeos, não pude deixar de notar, os equipamentos mais antigos tinham partes mecanicas mais resistentes, apesar de terem motores com menor voltagem, ou mais fracos... os mais antigos são mais simples, mas, bem mais resistentes ao tempo.

[@mingliao4312]

Nice works!

[@yufadanpratama4011]

Saya sangat suka restoration Cordlessy

[@gear_show]

saya senang mendengarnya

[@PyroBudestiofficial]

Good job bro 👍👍👍

[@gear_show]

Thank you so much 😀

[@selador11]

What is that powder that you use? Laundry detergent?

[@mas_ter92]

Very fun I hope you post a video showing how to connect the battery charging card 3, 4 and 5 cells in a simplified way. Thank you.❤❤❤❤

[@gear_show]

Great suggestion! thank you!

[@mas_ter92]

@@gear_show I will wait for it 😊

[@geraldtraub6917]

Hi good work , ilike your videos. What kind of Spray do you use to renew the plastic? I have an Bosch GDE 18V-LI HT and i wanna renew it. Thank u for your answer.

[@Yorumcu63]

Please watch older videos of master.He had describes all details in older videos

[@geraldtraub6917]

@@Yorumcu63 Sorry but he have so much Videos, it need too much time to search the right. Can someone help me please??

[@gear_show]

I use a flat clear spray to renew the plastic.

[@geraldtraub6917]

@@gear_show Thank u for the Info, Master^^ :-)

[@nathkrupa3463]

Weldon Bro I Am New Subscriber.

[@gear_show]

Thanks and welcome

[@hardiannugraha4100]

Another great job

[@gear_show]

Thanks!

[@danielsteenhoudttv3064]

Nice video.

[@DaftOldMan]

My channel only has 600 subs so you are the master but do you think the 20Amp BMS is good enough for the drill. 20A BMS does not work well for me. The wires for BMS look a little thin as each must carry maximum 18650 current which can be quite high.

[@gear_show]

You should check the battery cell discharge rated. I think this BMS is good enough for this drill.

[@حسين-ج9ط7ي]

Great job, thank you brother. You are so talented

[@user-Kovka999]

Спасибо дружище!!!

[@ArsalanKhan-bh2tz]

sorry for irrelevant question to the video... is there any way to charge Milwaukee m18 battery without having any official m18 charger?...

[@hamidrezasadeghi9267]

next time try to plating aluminium part to nickel or chrome paint remove easy great job

[@gear_show]

Okay, Thanks for the tip!

[@commercemagnified2495]

What you do with all these repaired equipments ?

[@مهدیایوانکی-ض2ح]

Hello, good morning, engineer Excuse me, my cordless drill has locked all three systems and the drill inside is broken How do I drill and fix three systems?

[@myrestorations]

Top work

[@MrMahmood74]

Thank you 👍 I have such a 👆 problem the battery can only accommodate 3 batteries 🤥🤥🤥

[@Yorumcu63]

Old batterys Ni-Mh batterys and voltages 1,2 volt and 10 pcs used .New battarys are Li-On batterys and voltages 4,2 volt .So 3 pcs used for same voltage(12 volt) also new batterys have more power also more use cycle too (Sorry master I was reply this question)

[@gear_show]

@Pathfinder 1963 never mind, thank you so much!

[@abdolmdani952]

Love ❤️❤️❤️❤️ gaer show

[@Pirotechnicgod]

Verry good

[@gear_show]

Thank you!

[@aarjavunnikrishnan5213]

Great job

[@gear_show]

Thank you!

[@nybpx96]

Hi! Can you tell me what kind of spray do you use at 8:15? Thank you!

[@gear_show]

It is a flat clear spray.

[@anangwidiasmara717]

Mantabs..... 👍👍👍👍👍👍

[@phongtrantv7624]

good job

[@gear_show]

Thanks

[@davidepiccini9254]

Nice bro yies 🤙

[@valentino_govoni_official]

amazing!

[@gear_show]

Thanks!

[@restorationconstantines7731]

Super👍

[@gear_show]

Thank you 👍

[@AbrahamsCircle]

Can you tell me how I can make a charger for the battery

[@wearsjorge55]

What spray did you use at 8:15?

[@gear_show]

It is flat clear.

[@markphillips6154]

Very cool

[@gear_show]

Thank you!

[@ziyamutlu]

master, can you please write the purchase link of the BMS card you are using?

[@gear_show]

I bought it from china. Taobao.com

[@КровожаднаяУлитка-ф9б]

Так заморочится, ещё и аккумулятор на литий переделать 👍😊

[@gear_show]

Но для меня, я знаю, что это li-lion, я добавлю наклейку на батарею, чтобы избежать этого.

[@КровожаднаяУлитка-ф9б]

@@gear_show Вторая жизнь инструменту 😊

[@Yorumcu63]

Master average 50 USD very low selling price for this drill .If you add any second hand or auction web sites in your country I think you can won more money.

[@gear_show]

@Pathfinder 1963 that is great idea, thank you so much!

[@d.r.p.electronic4931]

550K😃😃👌👌👍👍👏👏550K to 1m👍👍

[@gear_show]

I hope so, thank you so much!

[@efektmurowany]

What are the greas parameters you use?

[@stefanallgauer7276]

Top-Job. ;0)) Grüßle

[@gear_show]

Thanks

[@arturlend2297]

🇵🇱 perfect 👏👏👍😎

[@gear_show]

Thank you!

[@muradinfinity3939]

عمل رائع وجميل

[@gear_show]

شكرا جزيلا لك

[@Gggggjjyg]

can I buy it back from you?

[@RishabhBhagat]

awesone

[@congluan18]

Don't use that BMS,use the 30A BMS and six 18650 battery cell

[@gear_show]

Okay, thank you for sharing!