Tap to unmute

RUTC50 Vs RUTX50 - Teltonika 5G Routers

  Рет қаралды 3,213

Solwise Ltd

Solwise Ltd

Күн бұрын

Пікірлер: 13
@patrickdemarcevol
@patrickdemarcevol 6 ай бұрын
Hi Louise, good to see you. We haven't yet received the RUTC50 here at Mhz, planning to do an unboxing soon, in French of course. Enjoy your summer!
@louisebarrett5813
@louisebarrett5813 6 ай бұрын
Look forward to seeing that Patrick, nice to hear from you.🙂
@gcam474
@gcam474 5 ай бұрын
Thanks! Great treatment
@christiancossmann330
@christiancossmann330 Ай бұрын
Use-Case Motorhome: The RUTX50 can be set up with one Wifi Antenna as receiver for external Wifi coming in and the other in access point mode to connect devices to the RUTX50 - So two Wifis in parallel. How does it work with the RUTC50 with three antenna connectors? Can I pair lets say two antennas for Wifi internal and one for external to connect to an outside Wifi and get the external Wifi into my motorhome?
@solwise
@solwise 29 күн бұрын
Yes you can either have 2 of the RUTC50's WiFi ports connecting to indoor antennas and the 1 remaining going to an external antenna, or you can do it the other way around and have 1 used for internal and the other 2 used for external. If you would like to discuss this further by all means contact tech - support@solwise.co.uk / 01482 644938
@TreeWorksUK
@TreeWorksUK 6 ай бұрын
Can I pair the RUTC50 to my poynting MiMo 3 7in1, which has 2 WiFi connections, will WiFi 6 work? Fab overview of the latest kit, thank you.
@louisebarrett5813
@louisebarrett5813 6 ай бұрын
The 7 in 1 has 4 x LTE connections and 2 x WiFi connections. As you say, for proper wifi6 the C50 needs 3 wifi antenna. You could just use 2 of the wifi connections on the router but that would knock the speed back since it would now operate as a 2x2 instead of a 3x3. However, even as 2x2 it would still have the potential to go damn fast! Assuming the other end of the wifi is good enough!
@b1lleman
@b1lleman 6 ай бұрын
@@louisebarrett5813 You can always use one of the factory delivered wifi antenna's as third antenna if the physical setup supports it.
@robtheplod
@robtheplod 6 ай бұрын
I was waiting to buy the RUTC50 but the price is significantly higher at Solwise than the RUTX50 for little more.....
@louisebarrett5813
@louisebarrett5813 6 ай бұрын
That really was the purpose of this video, to give you all the information as to whether it was worth the extra cost to you. Only you can decide that ;-)
@b1lleman
@b1lleman 6 ай бұрын
Indeed, excellent point. I have the RUTX50 and the wifi isn't too great compared to other 802.1ac routers, so if you need high performance wifi or need IPSEC on the box the RUTC50 MIGHT be worth the money, but if not , usually the 5G reception is the limiting factor. I get up to 700mbps on my RUTX50 using it as a simple router and I think the CPU can go higher. I might try bridge some day but since my mobile provider doesn't allow inbound sessions I'd rather use Teltonika's RMS function if needed. 5G wise, it's an absolutely great device. [EDIT] I use the 5G Combo MIMO antenna (PR1KC640) from Teltonika , it's much cheaper than the poyntings and works fine
@GreenHavenFarmStay
@GreenHavenFarmStay 4 ай бұрын
what is a best matching Antenna to suit? i am currently looking at a 7 in one, but is this enough and is there better?
@solwise
@solwise 4 ай бұрын
Hi, both the RUTX50 and RUTC50 are compatible with 7-in-1 antennas such as the Poynting MIMO-4-17 & MIMO-3-17, the RUTC50 however would have 1 remaining WiFi connector on the router left unused due to both of the mentioned above antennas only having 2 WiFi cables, you could however use a “rubber duck” antenna provided with the router for this remaining connector. All router connectors on the RUTX50 would be used and match up perfectly with the above Poynting antennas. The Poynting MIMO-4-19 is a 9-in-1 antenna that would connect to all connectors on the RUTC50, but this would have the opposite problem of having an antenna cable left unused due to the MIMO-4-19 having 4 WiFi cables but the RUTC50 router having only 3 WiFi connectors. Dependent on how and where you wish to mount your antenna, you could consider a QuWireless QuSpot in which the router is placed inside the antenna enclosure. The AC50S antenna is made to house the RUTC50 and the AX50S is made to house the RUTX50. These antennas are made specifically for particular Teltonika Routers and would connect to all connectors on that router. If you would like advice on products for your specific set up feel free to get in contact with our support team: support@solwise.co.uk / 01482 644938.
Enabling Sustainable Manufacturing Through Engineering Workforce Development, Iana Aranda, ASME
35:25
Every team from the Bracket Buster! Who ya got? 😏
0:53
FailArmy Shorts
Рет қаралды 13 МЛН
The Lost World: Living Room Edition
0:46
Daniel LaBelle
Рет қаралды 27 МЛН
Teltonika's Remote Management System (RMS) Explained
14:49
Solwise Ltd
Рет қаралды 305
EP18 - Internet on a Narrowboat (Part 2) | RUTX50 Setup + Security Recommendations.
18:44
Teltonika RUTX50  5G Router - Test und Einrichtung
24:27
Machs gut
Рет қаралды 20 М.
Internet Solutions for your Motorhome
25:08
Solwise Ltd
Рет қаралды 1 М.
Dietz 2024: Geschwindigkeitsvergleich Teltonika RutC50 mit RutX50
10:16
AudiotechnikDietz
Рет қаралды 2 М.
THE BEST MOBILE ROUTER & ANTENNA I've used for over 4 years
31:54
Gadget John
Рет қаралды 106 М.
Every team from the Bracket Buster! Who ya got? 😏
0:53
FailArmy Shorts
Рет қаралды 13 МЛН