Ryan's 10 Tips For Best Performance In SolidWorks

[@with-Aryan]

I have a great webinar that is free and you can watch it here bit.ly/SolidWorksCourseProForBeginners

[@Dredster747]

For those unaware, Tip #9 applies to other features as well (such as extruded cut).

[@dominickhansary5542]

thanks for this video, iv learned a few nifty tips I'm going to try at work. I'm currently a CSWP (+ Drawing Tools) always trying to improve my skills.

[@with-Aryan]

Glad it was helpful!

[@neatmachine]

Excellent as always!!

[@RedGloveFan]

That is a great video. I will watch it again.

[@with-Aryan]

thank you

[@tomekpeki]

WOW! Amazing, thanks!

[@with-Aryan]

Glad you liked it!

[@joubertduplooy3986]

Love the video, learned a lot.

[@with-Aryan]

thanks Joubert

[@daryoushsoltani]

I suggest to slow down speed of talking thanks for the usefull tips

[@with-Aryan]

Thank you for the feedback, will look to implement the same.

[@moamenkamal]

Hey, Really appreciate your help in providing all these information but I'm in the beginning and I will use solidworks this year in the university, could you tell me where I start or resources from scratch.. going to do a lot of tasks. Thanks

[@with-Aryan]

I'd recommend KZbin if you don't have any budget. But the problem is youtube is the most unorganized platform for information. Have you tried my course? the link is below this video

[@with-Aryan]

Pro, this is the full course

[@TheMehryar]

Great tips bro. Keep up the good work!

[@with-Aryan]

Always! Thanks pal

[@ALFURQONTAWABI]

Thanks very helpful

[@with-Aryan]

Glad it helped

[@skillup323]

sir can say about the hot rolling simulation in SOLIDWORKS💔 Like Anysis Workbench Software ??? I'm Waiting For a Reply!!!

[@vardhmanshah156]

Can you please make a tutorial on the usb you have made and shown in the rotation tip part. Great video btw Thanks

[@with-Aryan]

Yes I will

[@vasudeokatdare6530]

Thanks a lot for this video. could you please explain, how to calculate weight of any component with different material.(i.e. Mild Steel, Copper, Aluminum etc.) how to change density too.

[@with-Aryan]

On the property manager on the left, find Material, right click and select material. Then go to the top to the EVALUATE tab and find MASS PROPERTIES, then read the mass. Also, if you want to manually define or customize a density of an already defined material, it's not something I would want to explain over text as it is not easy for beginners

[@shekiba.646]

I work with solidworks. Sheet drawing, Some missing check. How I need your help for check my drawing & sheet ? Or what apps check w/ help?

[@with-Aryan]

don't do whsapp suppor bro, only here

[@nasrahmed6236]

What agreat!!!!thank you so much my engineer Ryans

[@with-Aryan]

Any time!

[@prakashaprakasha3230]

Sir nice

[@avitolourenco]

Why and when to rebuild?

[@with-Aryan]

depends on the feature you are using. For Sweeping and lofting you have to, for extrusions you don't. You should build an understanding around it by experience

[@mohammedumar6779]

Awesome

[@with-Aryan]

thank you Mohammed

[@paultamio7911]

Can I run solidworks smoothly with my vega 6 integrated graphics? Is this enough for my CAD course as a chemical engineer?

[@with-Aryan]

oh I have no idea what that is. I was a mech eng. How much CAD modeling do Chem. engs have?

[@paultamio7911]

I think 2 or 3 CAD softwares, Autocad, and solidworks are those maybe. Our professor didn't tought that yet.

[@montiegomilano5166]

@@paultamio7911 of cource you can .Ram is also a key factor. for assemblies with more than 2500 parts you need to have 8 Gb or more ram

[@skillup323]

I take these things In Daily life. And enjoying it 💔💔💔

[@abhishekbidkar1270]

I am facing problem in finding out the patch file for SOLIDWORKS 2019 SP5 .... as it is for 1 month(trial version) after that we have to activate products.... So what should I do

[@with-Aryan]

where did you download it from?

[@remypaquin7224]

Personally never like using the offset extrusion methode. I use it in one off part or throw away 3d printed parts sometimes for expediency. But I generally find it make a model harder to "read" especially if you are sharing the file with co workers or so.eone may need to go back to this file several years down the road. Yes it make the actually part file cleaner especially if all the planes are being displayed but still rather have an actual plane to work of. Personal choice I guess

[@with-Aryan]

oh no! you can read that easily. take advantage of it

[@MechanicalCommunity]

Sir i am from India and I am a mechanical diploma holder student if I learn Solidwork then where I get jobs

[@with-Aryan]

If you want to only use sw, then you need to look for CAD designer positions

[@MechanicalCommunity]

@@with-Aryan sir what type of job do you do......

[@ajmalshahar8896]

In solid works 2018..tools like mirror ,extrude cut, are not available ro operate in features..how can i solve it..anyone help

[@with-Aryan]

they are!

[@moamenkamal]

One more thing, how can I download Solidworks? And is it updated automatically.. T

[@with-Aryan]

it is not something you can download for free. You can download it but you need a serial key which you have to purchase

[@ganapatikharvi6360]

How to create plane on conical surface with angle not given?

[@with-Aryan]

It has to have another reference like parallel or perpendicular otherwise you need an angle

[@ganapatikharvi6360]

@@with-Aryan I created the plane parallel to the front plane and clicked on conical surface for next reference. Now it has created tangential fully defined plane but wen i sketch on that plane i can't take define the hole distance from edge of cone and origin moved slightly above the current sketch plane.

[@mohammedumar6779]

Make video on intermediate level

[@with-Aryan]

Sure

[@pamplonagaming]

Yoo bro how can increase my models graphic high tell some bro😊

[@with-Aryan]

Like what?

[@victormanuelflorez-y3f]

8:21 thank you man! lol

[@with-Aryan]

Thank you for the compliment.

[@prakashaprakasha3230]

Sir refer me for learn Mastercam best youtube channel

[@lancec.bunton5629]

Slow down your speaking!!!!!!!!!!!!!!!!!!!!!!!!!!

[@with-Aryan]

too fast for you?