I DONT KNOW IF IT WILL EVER GET FIXED

Check Out The Store! www.lftdco.com
Wheel Giveaway ENDS 5/31/20 at 11:59 EST
Huge THANK YOU! to our Sponsors:
- Boost Auto Parts: bit.ly/2WSfrj3
- GM Tow Mirrors: bit.ly/2QMM51C
- Eastwood Company | eastwood.com (1VD6692 = 10% OFF)
- Banks Power | bankspower.com
- New Air | newair.com (MAYER240V or MAYER120V = 15% or $30)
- Hornblasters (Lime = 10% OFF)
- Speed Pole (6.7Lime = 10% OFF)
- Jax Wax Car Care (LIME = 15% OFF) | jaxwax.com
- VooDoo Ride (Ryan10 = 10% Off)
- Pedal Commander (lime10 = 10% OFF)
- Ridge Wallet (Mayer = 10% Off)
- Retro Shop LLC
- South Bend Clutch
- Wehrli Fab Custom (6.7lime = FREE SHIP)
- Flo-Pro Performance Exhaust
- Rolling Big Power (RBP)
- Aux Beam
- VanTrue
_________________________________________
30 Days of FREE Amazon PRIME!! : goo.gl/EzssTg
_________________________________________
Links: ⛓
Detailer: amzn.to/2NZWxDB
Shampoo: amzn.to/2NZWPKH
9H Ceramic: amzn.to/2Ql5qEn
Rain X Additive: amzn.to/2xvgfg4
30'' Light Bar: amzn.to/2xnuKCM
20'' Light Bar: amzn.to/2QKvREy
Cube Lights: amzn.to/2NmIRlL
Tailgate Assist: amzn.to/2G4o8yz
Diesel Cap : amzn.to/2NALPyE
Tunes: www.alligatorperformance.com/
30 Days of FREE Amazon PRIME!! : goo.gl/EzssTg
FOAM CANNON: amzn.to/2u89qRN
GEAR WRENCHES: amzn.to/2t6FzbK
24 Pack Black Ice : amzn.to/2npbPky
_______________________________________
Music: 🎶
/ capiteeon
theartistunion.com/dyallas
/ lakeyinspired
/ joakimkarud
__________________________________________
Social Media: 📺
Instagram: Ryan2546
Snapchat: Ryan2546
Twitter: Ryan2546
_______________________________________
The Crew:
Mike: / dobronos
Ben: goo.gl/cx8uq9
____________________________________________
I am participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Products in the provided links are my recommendations based on honest use and experience with them.

[@fernplayz6369]

I like that you powder coat the small things. Not only does it look cool and no one does it but also it protects against rust and all.

[@owensubjek5090]

This has been like a routine, every night I get in bed than keep refreshing till your video comes out. Lol

[@ryan2546]

Love that!

[@Blake64]

It’s the cv axles popping, from when the suspension drops down

[@jeremywashington4889]

On this channel I've heard rap, bluegrass, country, pop, and techno. Sometimes in the same video. This man's playlist is crazy 😂😂😂.

[@danielaragon6058]

Tahoe looks sick 😎💯✌️

[@MichaelBrown-wv5zu]

Powdercoat oven: we built a 6’x 4’ x 4’ stainless steel box and wrapped it in fiberglass insulation and then took the heating elements out of two old ovens and just mounted the control panels on the outside of the box!

[@baileyolds3979]

Ryan your channel gets me so motivated to work hard and learn to do things myself. I look forward to these videos every day and they inspired me to get my own truck. Thank you for “lfting” me up everyday!

[@heyaellj1980]

Ryan, my dude... you inspire me... The Tahoe looks so great! I hate I missed seeing you in Daytona. Maybe next year...

[@susanredington4601]

Steering stable liners and traction bars will do wonders.

[@austinconverse1921]

We did powder coating in highschool and we just had a homade box with metal wrap covering the whole inside and then put heatlamps on the door and put a thermometer in there to keep an eye on temp and maybe some adjustable vents if it gets too hot

[@dominikclark8860]

Check to make sure your springs are seated properly in the struts. Have had that problem where the spring isn't set in the cup right and pops or rubs on the metal cup.

[@chriswyattpandemic_silvera5088]

Ryan, you’re the guy that got me into doing this powdering. Did my whole kit myself with the same setup you have except I did buy a HF blast cabinet and I built an oven. If you want to check out my ig @pandemic_silverado there are pics on there or on fb @pandemic_silverado for even more pics. Bought the cabinet at Sam’s, insulated outside with rockwool and covered with plywood. A simple smoker vent from Amazon and propane top hat for heat. The top hat isn’t the best option, use a torpedo with digital temp controller. There are quite a few KZbin videos on how to set up the torpedo heater. Not huge but big enough to do everything you’re wanting to do. I did crossmembers,leaf springs, sway bar, compression struts and those big honkin’ spindles in it. And best part, the thing is on rollers! Feel free to dm me any questions. I know you’re all about DIY to save $. I decided to tackle my build completely myself & my Son from watching your channel. I’m in Fayetteville,OH so yeah...Go Bucks!

[@SMOKED.BRICK.PRODUCTIONS]

Changed my mind on these things. Look killer

[@johnnyhopkins7297]

10/10 on the shaft grab and shake

[@joshuamartin7443]

There’s also a bushing on the silverado lower steering column inside that goes bad. Like 20$ part. You disconnect the shaft inside and knock the bushing out with a screwdriver. Push the new one in and reconnect the shaft

[@TheMadPumpkinKing]

Also redo the suspension 100% lol that looks killer man!!😍

[@brandispencer9435]

Put some custom speaker pods in the door panels

[@taylor2613]

Try to tighten up the upper shock mount bolts I had to do that on my 2012 f150 with a 6inch lift

[@zacharyjordan7339]

I have a 2006 Colorado and the abs light has been on for years nice work I will be looking for that ABS fix vid it’s kind of annoying I want to have that satisfaction of not having any lights 😉

[@NORCALPYRO_]

When i rebuilt my front suspension. I did strut assemblies, upper control arms, upper/lower ball joints sway bar links, inner and outer tie rods. As well as brakes and rotors and wheel hub assembly all for around 900$. Installed myself .. thats atleast the minimum of parts you should change if you wanna get that steering right especially with those rims n tires. Pop on turns sounds like bad bushing somewhere or sway bar links maybe

[@mackdaisley4844]

Hey Ryan, double check the torque spec on your sway bar bushing bolts. Bushings are different because they need the right compression and if they are too tight the bushing is useless

[@SR5JOHN]

Don’t forget your rear sway bar end links. Those are maxed out now as well.

[@BrandonGoodine]

It’s your wheel bearings bro! My Silverado done the same thing and that’s why your abs light is on.

[@kerrfu]

When you get to the audio, don't forget to check out Skar Audio, definitely gonna be my next system setup. I've been looking into em and the power output is respectable and perfect for everything you've done already; not to mention the prices and application options are perfect for anything you want, from automotive/two wheeled automotive to marine usage, everyday use and competition. Even if you go small and single sub enclosure you still get a huge bang for your buck, as well as their component setups are killer. I can't stress em enough.

[@gspadez]

I did illusion rose gold on my zone lift kit on my 05 6.0 build ... its was an awesome choice ... and as a ode to it I’ll do the same on my oxford ram

[@tylerperlenfein]

Still not fully sold on the tailights, but the rest of the tahoe looks absolutely killer.

[@ethanlarrea7258]

hey ryan i just order my own 14 wides because i saw how god damn good they look on taho i’m running 35x14 tire and wheel 24x12 with -44 thanks for inspiration

[@trentonudovich6294]

Please put boost auto parts tow mirrors on it 😍

[@CG4Ut]

The ABS and service 4x4 lights start going off on these Rams when the wheel bearing is going out. When it does you'll lose a tire and truck depending on speed. I've seen way to many guys have this happen after asking about those warning lights and letting it go.

[@anthonytenhoeve5611]

Should deff be able to do round led pods . I did a swap like that on my old dodge and fitted em to look factory and also wired em into factory wiring harness . I used wide beam work lights so they still had same wide angle like factory fogs do .

[@1320Official]

Can’t let my man hold anything 😂 he’ll end up powder coating everything

[@PoisonSpyder038]

I would double check your struts make sure the coil is seated properly and all the bolts are tight that might be where your popping sound is coming from, just my 2 cents 🤣

[@billyokley5470]

You need a blasting cabinet for things like that unless you like the sand mess all over your yard

[@24sflossinon]

Dont know if you have checked it. But check out the bearings in the upper strut mounts.

[@johnbeyer7100]

The Tahoe doesn’t even look lifted

[@Jerms995]

So your saying Tahoe’s don’t look different when they’re lifted?

[@281skunk]

Try upgrading the stabilizer shock. If you have one.

[@dominicksorise5660]

Industrial vertical bread oven you can get them in gas or electric pricey look for a used one.

[@tbss_vince2191]

Thats a sign of hubs ... the abs/stability trac ... my rwd trailblazer ss did it ... my silverado 1500 4x4 did it ...

[@burke_brothers]

Have you considered doing a starlight headliner in the Tahoe? It would be cool to see that in such a large vehicle.

[@arevalo8789]

Might be your rear control arms, that’s what was causing my popping noise over bumps as well. All I did was tighten the nuts and that fixed it. 2017 Ram 1500

[@jeremyrooks6911]

If you have spacers on your front struts, pull one top nut off at a time and see if the stud is sitting on the edge of the hole. It will cause a pop sound also. Just reposition the strut so the studs are close to center and tighten good

[@gspadez]

Damn gas handle sits about where my tow mirrors lol

[@Jake_Jordan66]

My fathers 2018 Larimie 2500 has the abs and traction control lights that comes on and off. It come on and goes off when the truck hits bumps or hits standing water. It’s a common problem with the 4th gen rams. I believe it’s the wheel speed sensor.

[@jeremyrooks6911]

The problem with the shafts aren't play up and down. Usually its in and out which u wouldn't think but is common

[@Matthewdennis1]

Just had the same issue with my truck, check the steering gear box in the rack

[@superdwarf]

Colorado weather right now 45 in the morning 85 in the afternoon. Moderately obnoxious but still manageable.

[@nothing_but_gm]

Kryptonite products for the steering and hub stuff for the tahoe

[@kovemakesbeats7545]

get the Flowmaster American Thunder Exhaust, or if you like crazy loud without going straight piped, Outlaw series also from Flowwmaster

[@Lawson4450fire]

Make sure you replace the plastic bushing in the steering wheel as well since you will have it apart easier to do it now. It will also take a little persuasion and patience, ask me how I know lol

[@donavanwalterstubbs3294]

Do the inter and outer

[@wyatthelm1856]

You should get some boost auto toe mirrors

[@firestancegang132]

CV axles and tie rod ends or pitman arm and idler arm is toast. And use moog parts. Also check wheeling bearings and hub

[@jakeorsak5136]

You should powder coat tumblers to sell on your website.

[@colbymartin2747]

I have the same year and mine did the same thing it was my motor mounts

[@apprentaapprenta7682]

It’s common on mopar products for the wheel speed sensors to fail, and it causes the abs light, and traction control light to come on, sometimes if you don’t fix it your vehicle will go into limp mode. The reason I know this is because I do work for a dodge dealer and see it the wheel speed sensors fail on V6 chargers/challengers and excessively lifted trucks and keeps

[@ryan2546]

Thank you!! Will look at it!

[@joshbotello4792]

It’s a wheel speed sensor on the front for your ram. Happens on mine like once every 3 months

[@Walrus50]

You should get some Circle pods and color match them as well

[@daltonlunn3515]

You should powder coat the cross member black

[@nsubira]

Try steering stabilizer assist bar

[@grantmeyer03]

Instead of a powder coating oven what about a kiln for baking clay pottery it's bigger than an oven but you could probably get a used one from a college or school.

[@levipenn8596]

It looks like it’s pretty low on brake fluid. Might want to possibly check into that. Love the vids hope you the best.

[@shawn_baker]

Should've did the sway bar too! or just painted it black

[@lameravergota9481]

Buy Tow mirrors for the Tahoe

[@zachf1951]

Steering shaft bearing. A lot of people don’t even know about it. I did the same wild goose chase on my truck and that ended up fixing it.

[@jimcross1061]

Rust belt did a video on it.

[@lifewithcourtland7943]

I wanna see some wheel lights on this thing

[@tannerhall7056]

Check your abs or speed sensor wire on the front end. It’s probably cut in half and that’s why those codes r there

[@justinrabon1581]

Try doing a hyme joint conversion

[@buffalobmf]

Yea its getting colder. Drove to work at 6am this morning and was 37 and needed all the heated things on 😂 then i drive home at 3 i needed the ac on

[@thatwidecateye]

It’s still to hot here 😂

[@kevinbryant6459]

So trrue it was 46 then 78 in the afternoon , summmer is over😳

[@elvaquero3030]

Change the lower ball joints. That makes a clunking sound too.

[@m0nsterenergy99]

Had a popping that I couldn’t find on an old Jeep after rebuilding the front end. Ended up being the shaft on the strut the center nut was loose. Also the lower control arm bolts were loose from the alignment shop. Hope it helps.

[@grantjensen9158]

Looks good

[@zachs9817]

You might have to pull a little bit of lift out of the front those CV axles at maximum angle just riding down the road

[@codyscarborough3127]

Should powder coat the inner tire rod cherry red

[@mattward330]

Should go to 1A auto and order all that stuff. Can normally get packag deals pretty cheap.

[@jonathantantillo5138]

do a cold air intake and an exhaust, make it sound a lil better and give better acceleration

[@keithsaylors3818]

Invest in a set of chassis ears.

[@sgjackson1992]

I built an oven out of a stand up deep freezer.

[@susanredington4601]

Disconnect the battery for a couple minutes and reconnect that should reset the brain box, that might reset everything.

[@colinwaldron1295]

I’d take a look at the wheel bearings with the popping and clunking when turning and bumps. My old f150 had the same symptoms and my front driver side wheel bearing ended up blowing apart

[@mstarn00]

Loosen all your suspension bolts while weight is on the truck bounce it a few times then re-tighten and torque it all down

[@Ls_swap211]

That rack is normal movement I thought same thing but it moves a lot If your getting poping on bumps in the road then you need to go over your shock tower bolts and the bottom buschings on the shock I bought bilstiens 5100 10-12” adjustable and the bottom busching was shot after a few months Went out and bought some cheap mcgaughy 7-9” and set em at 9” with 2” level spacer under the bottom and the poping went away lol

[@obs.on.40s86]

Tahoe needs silverado tow mirrors

[@ryanlaw7474]

There is a guy down by me that does powder coating. Everything from frames to bolts.

[@sterlingfishingandoutdoors6784]

Yea

[@robertswenson727]

The Cummins light problem might be the wheel bearing because that’s exactly what happed with my Silverado then thinking it was fine my wheel bearing went out a couple days later

[@jadenbishop7240]

To fix some of the play in the steering pop off the top plastic piece above/behind your steering wheel and you’ll see two T25 (I think) bolts and you’ll have to turn the steering wheel to get to one. Snug those up good and you’ll be surprised at how much it’ll tighten things up as far as your popping issue it sounds like a cv axle to me

[@jadenbishop7240]

kzbin.info/www/bejne/hWq7dH1jeJpsmpY

[@power9529]

That red color is fire 🔥

[@bradleygaspard8198]

Had same issue in my 2014 ram... It ended up being the ABS control module. Had to have it done at dealership because it needed to be flashed to the new part. Good luck

[@nsubira]

May have modify

[@laurenjames3440]

My truck did the same thing and I still can’t figure out what makes the little noise but I found out my strut shock was a little loose. If you still have noise after your rack fix that might be it.

[@backwoods_outlaw7108]

I wish mine only had 100,000

[@joeysawyer7572]

Wheel speed sensor on the ram check to see if sand got in there

[@ryan2546]

Will do!!

[@JerryandJack]

Get longer cv axles for the front . Front Popping will be solved . Good luck

[@andresapodaca483]

Check out eastwoods 4x4x6 oven and booth

[@brandonsoto6925]

The ABS might be because the tires are to heavy because that happened to my truck

[@darrencajka8872]

I'd beat its your cv axles. But nice work

[@nsubira]

Steering stabilizer bar dude I’m trying to get on for my 99 Durango probably try the one for 1500 or Dakota for Durango seems not made for it feel-me where I’m at

[@JDR1661]

I ordered my hoodie this past Sunday! Can’t wait for the cold time cause those green one looks amazing

[@FLSanchez93]

How about a supercharger

[@williamclifford8042]

Pull the suspension off and powder it