Ryobi Hedge Trimmer Repair - How to Replace the Fuel Line and Filter

[@alexandersaucedosr7124]

Thank you Mark you thought me every thing i know about weed eaters your the best Mr Saucedo Sr from west side verdugo San Bernardino Ca

[@facereader99]

Excellent. Professionally made video.

[@nutrocker62]

excellent video

[@vatar57]

Nailed it

[@jimmidan59]

Why not change both fuel lines?

[@finnichglen]

I have found it impossible to push the filter through the bottom of the tank, I cant even get the angle to push it through with a screwdriver due to the diameter of the filler neck, what an absolutely awful design, have given up now.

[@jonnysnipes3123]

I rebuilt over a dozen of those ryobi trimmers. Most simple engine to work on and repair. Fuel lines are easy. The trick is to take a 12 inch line and cut about 4 inches of the line slim so it fits through the tank and then pull it with needle nose and the job is complete

[@Xergthes]

I am in the same boat. Gonna keep at it till I figure it out

[@NCXerxes]

Same! Found it impossibly hard to pull the new filter with hose on barbs through the hole. Screw driver won’t work, the angle is wrong.

[@thisisyourcaptainspeaking2259]

My solution is a filter that's weighted and lays in the bottom of the tank.