Great video . I didn’t know about seat lowering brackets . Thank you for sharing .
@hendersonlandworks61584 жыл бұрын
Bat cave custom did my cage and did a killer job on it y’all should look William up on Facebook he has a rock bouncer called “going postal” if he trust himself in in I trust his cage lol
@BlownBudgetOffroad4 жыл бұрын
Sounds good I’ll look into it lol
@JohnJohnson-xm2tf4 жыл бұрын
machine is so clean trails need to open up this covid b.s is getting old fast
@Hondarider354 жыл бұрын
Come to the Oklahoma dunes this weekend.
@28fitztrey4 жыл бұрын
Check out off road beast-justin peirpoint out of Tennessee
@aarenhaines15894 жыл бұрын
Reaper Cages. Best ive seen!
@ROCKINRODNEY4 жыл бұрын
Great stuff fellas. Just throwing it out there, but if you're not in a hurry for the cages, you could consider picking up a JD2 bender, take your time, and build the cages yourselves. There are plenty of channels like The Fabrication Series that you can watch prior to starting. It would make for some great shoulder content.
@justinjohnson19244 жыл бұрын
Chandy Krash? I know he does yxz not sure about others
@JoshOfAllThings4 жыл бұрын
Check out Clayton Wilson at Wilson Motorsports in Acadia Missouri. He does awesome work!
@Norm21204 жыл бұрын
If you want a bouncer style cage get ahold of Bustedknuckle
@DirtRoadBoyz24 жыл бұрын
Shop is looking good!
@BlownBudgetOffroad4 жыл бұрын
DirtRoadBoyz thanks man!
@TALENTLESSOFFROAD4 жыл бұрын
Gatekeeper Design. Austin is a super awesome guy with safety being number 1. I have unfortunately tested his cage against a truck and it held up like it never happened and I was unharmed. First thing I did when I got my new Turbo S was ordered another cage from him. Plus if you are going to run harness he will lower the bar behind the seats to the lowest it can go, so you get a better angle on your shoulder harness.
@JamesSmith-hn5rf4 жыл бұрын
Really, enjoy the videos
@nickmills35164 жыл бұрын
Those seat bases make a yuge differance! Wished I would have done them sooner.
@-CHaPPy-3 жыл бұрын
I'm still torn between nrp or the gear grabber
@TimsStackingAdventure4 жыл бұрын
Your going to like that shifter billy. I put the nrp one in my rzr saved my butt a couple times. Going to be a nice car when your done.
@BlownBudgetOffroad4 жыл бұрын
tim jones thank you man!
@stevenhoffman65834 жыл бұрын
Haven’t seen anyone mention Justin yet with RZR sharp customs. Definitely get in touch with him. He’s done a few killer can ams so far.
@BlownBudgetOffroad4 жыл бұрын
Steven Hoffman I think that’s where we will end up going
@brandonbaldwin68454 жыл бұрын
I'm ready to see this thing ripping on the trails!
@tonylemaster314 жыл бұрын
Guys, AED-Off Road in Kentucky. Just take a look at his page, the welds are unbelievable and his work is sick. Mines PRO XP is going down there in mid May.
@BlownBudgetOffroad4 жыл бұрын
Tony Lemaster will have to check him out thanks!
@jamesworkman6864 жыл бұрын
Doug from SXSBlog can build Cage's for both or bustedknuckle off-road in Alabama they build cages for rock bouncers all the time
@mcook45754 жыл бұрын
You didn’t mention how you liked the seat brackets in the video are you going to mention them later?
@BlownBudgetOffroad4 жыл бұрын
M Cook I really like them hard to make that assumption without riding with them but since I got a good day on them I like them but still going to do after market seats to hold me better.
@jordancaird80493 жыл бұрын
Did the seat base help the high up tippy feel?
@BlownBudgetOffroad3 жыл бұрын
Never rode with out them but the main thing i got them for is to sturdy up the seat and so i could run a lower cage but they are a big upgrade over the plastic ones. Billy
@jordancaird80493 жыл бұрын
@@BlownBudgetOffroad okok thanks for the reply brother
@montycaudill22074 жыл бұрын
gatekeeper design builds a really nice cage he builds all of the southern land riders cages I think he is in northern alabama he is on facebook
@BlownBudgetOffroad4 жыл бұрын
Monty Caudill yes he does build some pretty nice looking cages but we are looking for more bouncer style thanks for the recommendation tho! Billy
@jamesworkman6864 жыл бұрын
@@BlownBudgetOffroad if you want rock bouncer style your best bet is to use bustedknuckle off-road in Alabama
@Travcity14 жыл бұрын
Courious how you like them? I installed the l&w and didn’t like them at all. Sliders didn’t work and just a wire position. Took them off same day.
@BlownBudgetOffroad4 жыл бұрын
Trav City I like them a lot still need to do seats but made the stocks way more comfortable. And my sliders work great.
@ramonruybal98084 жыл бұрын
Did you figure out what wuz wrong with x3 in moab ?
@Rmz250ryder4 жыл бұрын
Dont go too low on your cage. I had one custom built for my 16 xpt and the guy made the front pretty low and its really hard to see the front of the machine when your at a crest of a hill. Same with looking up when your about to go up a hill.
@greggbernard27154 жыл бұрын
Good looking unit so far lol Hmm can't remember the name but the SxSblog guys got cages done on a honda and a X3 and they both looked real nice
@BlownBudgetOffroad4 жыл бұрын
Gregg Bernard yea I believe they used brick city fab on there units but we are looking to have custom ones built for us but thank you the build is coming along nicely! Billy
@randalsweeting6614 жыл бұрын
Ask sxsblog to build them. Doug has built many cages that have proven themselves.
@dash88964 жыл бұрын
Brick City Fab
@96dodgeram4 жыл бұрын
Need to do a safety sticker delete , while its fresh an new . Makes look so much better.
@billydehaba60194 жыл бұрын
When are ya doin rzr hoodies
@BlownBudgetOffroad4 жыл бұрын
Hopefully soon!
@dieselguy41924 жыл бұрын
Wrong turn fab in roots town Ohio look him up on Facebook he does amazing work on both can am and Polaris cages. He has the best full doors for a Polaris out of anyone. He uses a spring loaded pin that’s tied into the front of the cage so the door will not fold in. His name is Dennis great dude
@darylluebrecht40474 жыл бұрын
Hey Billy when I installed l and w bases I moved the bottom seat cushion 2" forward, re drilled the factory seat frame 2" forward makes a huge difference.
@fenderguitar354 жыл бұрын
Reject Fab , the only fab shop u need.
@BlownBudgetOffroad4 жыл бұрын
Danny Smith I’ll have to look into them! Thanks buddy! Billy
@dominicflorea38604 жыл бұрын
Is the seat lowering kit still adjustable??
@BlownBudgetOffroad4 жыл бұрын
Dominic Florea yes they are.
@KnownSender14 жыл бұрын
Yee yee 💯👍
@jimhorton41184 жыл бұрын
Enjoying the videos. Hope to be trading my pioneer 1000 on a rzr xp 4 turbo s soon
@gregrogers23394 жыл бұрын
anyone have an opinion on "demon" axles? i'm thinking about having spares! not sure if i should stay stock, or get something aftermarket? any thoughts? Only a matter of time eh? lol...
@BlownBudgetOffroad4 жыл бұрын
We haven’t ran them, what machine do you have?
@Hondarider354 жыл бұрын
I will message a guy I know. See if he will reach out to you guys. Tqr cages. They are great cages.
@jackfirth34754 жыл бұрын
Check with clayton Wilson its Wilson motorsports he I'd out side st Louis he did zack nash's cage and built the enemy and war pig chase
@BlownBudgetOffroad4 жыл бұрын
Jack Firth that’s who I wanted to go with personally cause we have met all those guys but he hasn’t done any x3 cages as off now. Billy
@phillipmcr4 жыл бұрын
I sent y’all a link on fb messenger for a cage builder here in middle Tn
@darrylreed91014 жыл бұрын
Hit up Justin Frasure at RSC RAZOR SHARP CUDTUMS. WARSAW KY...he does awesome work
@BlownBudgetOffroad4 жыл бұрын
Darryl Reed we are leaning towards him as off now he does awsome work!
@jrsue4 жыл бұрын
Ticky and "Buzzy"
@cliffvalentin35644 жыл бұрын
I’d recommend JG Fabrication for a custom cage in Cincinnati OH. Check Jeff out on Facebook. Couldn’t be happier with mine.
@josephrogers29604 жыл бұрын
Check out rzrsharp customs on face book out of Kentucky best cages ive seen
@BlownBudgetOffroad4 жыл бұрын
Joseph Rogers that’s who we are leaning towards!
@jrhaymond8814 жыл бұрын
Hey check out 859 off-road or reaper fabworks. My friends and I got work done from josh over at 859 off-road and he dose amazing work check him out. He has a Facebook you can see his work
@BlownBudgetOffroad4 жыл бұрын
Jake Haymond will be shure to look into them thanks buddy!
@kolbeherron34384 жыл бұрын
ORB fab justin Pierpoint he can hook you up
@BlownBudgetOffroad4 жыл бұрын
Kolbe Herron got a bunch of goodies on the way from him already! One off the best in the business for shure!
@michaelpowers64334 жыл бұрын
Blown Budget Offroad definitely go with orb Justin Peirpoints customer service is top notch I’ve had two cages from him they are great
@bobreynolds81844 жыл бұрын
Check out nineelevenfab.com he has fb and ig accounts that he replies to all the time. He is in Ohio and definitely has no problem working with the customer on the design of a cage.
@matthewlundrideordie81514 жыл бұрын
Two vids now... you need to tell your gardner to stop mowing the lawn when u filming.......
@BlownBudgetOffroad4 жыл бұрын
My wife was power washing the deck lol but yeah we had some videos in the middle of building the shop that aren’t ideal but what ya gonna do. They’ll be good now
@101rotarypower4 жыл бұрын
What is the actual outside width on the rear of the X3 with the stickies? Have a "narrow 6'-4" between the rails"" trailer and really hoping they will fit outside to outside of tread block in the rear with a bit of wiggle room? You guys measured the fronts at 72.5" wide on the roxxzillas. kzbin.info/www/bejne/qHzFiJKDqdugd8k Any chance to get help with conformation on the rear with stock wheels also? Please and Thank You!
@BlownBudgetOffroad4 жыл бұрын
101rotarypower I believe it was 72 in the rear we will double check this weekend and get back to you! Billy
@101rotarypower4 жыл бұрын
@@BlownBudgetOffroad Thank you, I am guessing they are ok, but it would be great to get conformation my assumptions are correct! Are these the tires on the X3? 32-10R-14 Congratulations on the Turbo S, can't wait to see what you can do in it once you are comfortable pushing on it.