S&B 7.62x39 - Brass Vs Steel Case

In this video, brought to you by our good friends at Sellier & Bellot, Larry talks with Mike Fisher about the benefits of using Brass Case 7.62x39 Vs Steel. Go check out the video and remember to help us out by Subscribing Below.
Click here to subscribe to KZbin:
bit.ly/3qPWDw2
Click here to keep up with me:
Facebook: / larryvickers
Instagram: / vickers_tactical
Website: www.vickerstact...
Book: www.vickersgui...

[@bogo1992]

🤔 ...my AKs are on a strict COMBLOC steel diet as recommended by their Slav breeders.

[@mr.c.3760]

Goin brass for AKs is like being a vegan

[@chewbecca3830]

worry about corrosion? WESTERN SPY!

[@darkquaesar2460]

you need to play them hardbass and give them plenty of dirt to play in too, AKs have other needs than just food!

[@manganvbg90]

Dont forget the adidas outfit!

[@robsidiotcrew2]

Tip some vodka in the working parts and down the barrel once every few lightyears and your good to go 👍

[@jed4791]

Nyet! Ammo is fine.

[@bogo1992]

This^

[@GratefulDawg760]

"Gimme 2000 rounds of the cheapest shite you have!"

[@jackmeholf5565]

I shoot tula almost exclusively out of my 5.56 AR15....

[@jackmeholf5565]

@Crown royal my girl is a cheap date. I tried frontier ammo recently. It was inaccurate and over gassing my rifle.

[@jackmeholf5565]

@Crown royal if you feel the need to pick up steel cases, magnets works great!

[@richardh4469]

My man Vickers handling full auto like a champ!

[@OldManMontgomery]

Wowzers! He hit something like 70% hits on a silhouette gong at 10 yards or so.

[@Tree_Dee]

OK. Who else remembers 20 rounds of Wolf for $2.50? (sob)

[@NuclearGrizzly]

I remember when you could buy a case of Chinese steel core and an SKS for $79. When we were done we'd spear the SKS into the swamp. Then go get more.

[@budstermcgreen6360]

@@NuclearGrizzly exactly how I picked up my first SKS! I wish I would have bought about 25 SKS and about 50 AK's back then. They were Chinese and still packed in grease. Those were the days! ✌

[@NuclearGrizzly]

@@budstermcgreen6360 I keep one. A particularly accurate example with the red fiberglass "jungle" stock. All the rest are sleeping with the gators. I could kick myself now.

[@Will97675]

NuclearGrizzly I wish I grew up in those days. I always hear about it from my dad and I get jealous, I’m only 23.

[@PL-fg2du]

I remember cases stacked to the ceiling at shops and rows and rows of SKS's in 1980 Norinco steel core was 1.99 per 20 rd box copperwashed the good shit. SKS's were as follows...... Chinese paratroopers or full size $59, Yugos were$79 and racks of tula's for $99 and you could pick from 100's

[@operator1192]

I haven’t met a stock AK that doesn’t dent the shit out of brass cases making them not really reloadable after a firing anyways.

[@notyou1877]

Your loss then.

[@operator1192]

Pete Lyczek it really is...literally haha. Not saying it isn’t good ammo. S&B have definitely given me better groups during slow fire when focusing on being as precise as possible. But the vast majority of what I do with an AK is usually run and gun between 50-100yds just trying to get center mass hits on torso targets. I’ll save the brass cases for shots where I’m taking a little more time.

[@Apolloneek]

Depends if its a normal violent ejection or a adjusted piston. But for the 7.62 ars with a good mag i see these working good

[@operator1192]

Nick Levine most 7.62 AKs are overgassed from the factory to ensure maximum reliability even with poorly manufactured ammo. I’ll admit that the KNS pistons are nice especially when shooting suppressed or if your gun is violently overgassed but most of mine aren’t overgassed by much, even suppressed with the Dead Air PBS-1, but they are enough so that the cases usually end up with a small dent from hitting the dust cover or charging handle

[@maxinspace1]

...if you are lucky enough to find the cases after they have been ejected and dispatched to the county line

[@b16sol94]

If your gun won’t run steel case, sell it. Extractor is a wear item and needs replaced every 10,000 or so anyways.

[@-John-Doe-]

Brass is roughly double the price. Let’s say it’s 30 bucks to replace an extractor. You save that money in 150 rounds?

[@danielhet6286]

@@-John-Doe- and if you run it in an AR, the barrels are 150 to 200. Also. Cheap

[@michamichaowski8375]

My friend has a KAC SR15 and it wont cycle steel cased 223 barnaul ammo. Should he sell it?

[@badcholesterol]

@@michamichaowski8375 yes

[@tbonilla6922]

This is some of the most accurate 7.62x39 ammo in my AK’s. Good stuff, but you pay a premium. For hunting or self defense, this is a great option. But if you’re using it for target practice, don’t, save it for a rainy day and use cheaper ammo for the range.

[@tbonilla6922]

Joseph M. In all of my years of shooting, your statement is the first I’ve ever heard a mention of this claim. My personal experiences with S&B do NOT support your accusation.

[@ramzankadyrov6035]

@@josephm.6453 S&B is fantastic! You’re also the first person I’ve heard drag S&B.

[@kdcustoms1272]

Brown bear always did best in my WASR. Sub 3moa every time. Now I can't get it.😭

[@bearjew05]

The magtech guy looks like a Command Sergeant Major at a Hail and Farewell.

[@brianborell4469]

I was thinking he was a gunny for sure. 😎👍

[@Omnihil777]

The slo-mo shots in this channel are absolutely PRICELESS!

[@roul3688]

Reloading 7.62x39 for an AK was an epic failure for me. My Hungarian under folder, my Arsenal SAM7R, and my Vepr (in 7.62x54r) all tore brass cases to shreds. Cases came out badly dented and damaged, something I don’t see with steel. The Vepr struggled with any brass, especially any heavy ball ammo. It loved light ball with steel cases.

[@spacedredd]

I have a Robinson Arms XCR-L w/both the 5.56 and 7.62X39 kits. When I'm using the x39 kit. I discovered a few years ago the S&B was the best choice of ammo. Reliable and consistent. Affordable.

[@tylerbenson993]

I'm good with Tula, shoots fine.

[@chrisrogers4242]

Not anymore. I would order some brass case

[@maximilianfranz2158]

last time I was this early you could still get surplus ammo for a couple bucks lmao

[@dexm2010]

That milled Zastava is a work of art.

[@budstermcgreen6360]

That AK was slinging the brass into the next county! I've always had good luck with Mag-Tech ammo. Thank you for everything you do LAV! ✌

[@wombatstriker]

Glad to hear there's another option out there, I can definitely appreciate the soft points and just more options in general; generally love Czech firearms related stuff (and have even met some great Czech girls, love their beer too); LAV brings us a lot of cool content also- but this is really just a straight up commercial trying to solve a problem that mostly isn't there IMHO

[@CaspersCave]

Looks like S&B is offering ammo tailor made for the Mini 30 owners. I was surprised the factory rep didn't mention that platform since that group would make ideal customers for this product 🔫🇺🇸

[@7gerez]

“Offer people a higher grade option” Laughs in SKS

[@regularfather4708]

*Laughs in WASR-10*

[@Bearclaw_Jake]

*boogaloo noises*

[@rudder727]

steel case is 1/2 the price end of story.

[@regularfather4708]

But it's bad, because reasons.

[@hoffmiermp]

@@regularfather4708 Not really, especially with shooting the stuff through combloc weapons. My Romanian SAR 1 and micro draco fire it just fine with zero issues whatsoever. My prissy ass RAS 47 pistol is another story, doesn't function all that reliable with steel case stuff, but is perfectly fine with brass case stuff. I'll never shoot steel case stuff out of any of my ARs or mini 14s because the stuff is really hard on the extractors and broke a few. Besides that, I had a few cases get stuck in the chamber as well.

[@regularfather4708]

@@hoffmiermp I was being sarcastic. Steel is about 80% of everything I shoot. AR, AK, glock, keltec, sks. Everything eats steel.

[@hoffmiermp]

@@regularfather4708 👌

[@sieve5]

Not any more

[@duroisgawd]

Keep the brass x39 coming. I love it.

[@MrRebar15]

*Vickers tactical* Very nice, thank-you sir for taking the time to show us. God Bless.

[@SheppardOfDeath]

Nice to see brass cased 7.62 to use in indoor ranges finally

[@drunkpolack7612]

every indoor range I've been too allows steel cased so idk what your talking about

[@SheppardOfDeath]

@@drunkpolack7612 At least in Eastern Michigan there are no ranges here that allow for steel cased ammo. From Detroit upward to Flint I have not found a single indoor range that allows it

[@drunkpolack7612]

@@SheppardOfDeath ok central texan here

[@timbaskett6299]

Gee LAV, Are you reading my mind? Saturday I just bought a Ruger American Ranch in 7.62x39mm and am looking for brass cased, and soft point options. Thanks for the timely video.

[@aliasje2snj731]

Very ironic, I’ve been looking into steel vs brass a lot more lately, and here is one of my favorite KZbin channels talking about it.

[@TheSuburban15]

Isn't "high military standard" an oxymoron?

[@rzr2ffe325]

Depends on what the other baseline options are. Normally the military will go with the lowest bidder if it's buying in quantity and if they can still meet the requirements. Alternatively, if it's something more specialized, the inflated military industrial complex normally offers the best available. While there is still bidding for contracts, the Pentagon may purchase quality if it offers a considerable advantage. Case in point, the stealth bomber.

[@SALTrips]

@@rzr2ffe325 What quality, like $10,000 hammers and that Flying Spade that the Serbians shot down with an old Soviet ZPU?

[@mitchjames9350]

I guess the ammo etc special forces use.

[@greyhoundTex]

Sellier & Bellot, my favorite ammo manufacturer!

[@hekkenschutz]

We needed this ammo 20 years ago

[@InTheYear]

And we still do. Great for midsize game.

[@regularfather4708]

No. We really didn't. Wolf makes sp ammo. Have for years. Get some Wolf and go kill Bambi.

[@drunkpolack7612]

my ak eats up steel cased wolf all day and its not corrosive

[@AnontheGOAT]

slow 2v ya Larry is shilling a bit here. None of the modern steel cased offerings are corrosive. Milsurp and earlier commercial stuff was, but not anymore for for the latter.

[@AnontheGOAT]

Marcin Faron every box that I’ve opened says non-corrosive. Where’s yours saying otherwise l?

[@AnontheGOAT]

Marcin Faron Again, where is your proof? You’re saying that Tulammo, Wolf, RAS, Golden Tiger, Silver Bear, etc etc all lie? You might as well apply that logic to anything you purchase. So far all you’ve done is gotten emotional without a single shred of proof. I have 3 Izmash AK’s. No corrosion on any of them and I don’t clean them very often.

[@regularfather4708]

My AK gets nothing but berdan primed, steel case, bimetal jacket. I only clean it on leap years, and the only rust is on the disused bore brush. My mosin nagant, however, still gets fed some corrosive ammo that I have left over, and if it doesn't get cleaned the second I get back from the range there will be corrosion before nightfall. Y'all haters have obviously never fired corrosive ammo, let alone noncorrosive Russian ammo, or you would know the stark difference.

[@nikolanaumovic772]

Hi Larry.This is a regular army M-70B1, not a civilian copy. How did it ended up in US? By the way I used to have been issued a rifle just like that,only with a different muzzle brake. Much better than the one with a folding stock.

[@MeKnotChu6651]

I'd love to see some brass cased s&b 154gr sp. My lar47 shoots 154 gr tula like a laser

[@rottdad775]

For some reason my 10" Zastava M92pap loves that same 154gr SP as well.

[@raidaz7557]

Whose getting a new gun once we get our stimulus checks also which should I get ar 10 or ar 15

[@ts1905]

If you already have a few guns and a moderate amount of ammunition, i would recommend you buy some non perishable food and other essential items. Guns are important, but so are other things.

[@michaelmarkle5133]

Shhhhh don't tell my wife bro

[@raidaz7557]

@@ts1905 true true

[@nickrhodes4619]

Night vision brother..... having the ability to operate 24 hours of the day is a massive force multiplier

[@raidaz7557]

@@nickrhodes4619 any u can recommend

[@Will97675]

Tula, Wolf, Silver Bear and Brown Bear is all I shoot. No need in wasting money on brass for a gun that will eat anything you throw into it!

[@chrisrogers4242]

Lol. So about that Russian steel case

[@Will97675]

@@chrisrogers4242 this comment aged well lol

[@jimbean7431]

I have had this exact brass rip In half in the chamber . Took me a while to remove . Made to shoot steel case ammo

[@robertwilliams7876]

I had to take my sks to the gunsmith.. First and last time I used brass in her.

[@regularfather4708]

Don't question the corporate shills!

[@bentheenigma1913]

S&B is good stuff

[@col.cottonhill6655]

Just get some spam cans rifle is fine

[@kristjonpedersen9342]

My only problem with reloading 7.62x39 is my sks and aks chuck the brass into orbit and I have trouble finding it at the range.

[@Chris_Garman]

I could get 5 cases in the air at one time easily with my SKS they went so high. They would always land in a pile too, except for the Winchester, they landed all over my LEFT side.

[@kristjonpedersen9342]

@@Chris_Garman my sks tends to shoot my cases straight up probably 10+ feet in the air like we're talking a perfect line up from the floor and tends to spin the cases. We'll see how the vz-58 does and the next couple aks once they're built.

[@Garandasaurus]

I love that yugo AK. I love Larry too. Cool vid.

[@mannym5692]

Yap M-70 with gas cutoff

[@DestroyER82]

@@mannym5692 Actually even the quite rare variant with forged receiver.

[@AString95]

My Mk47 has devoured 1000s of rounds of steel cased ammo with zero issues. I have some of this S&B, looks pretty but Barnaul wolf is far more accurate ammunition.

[@Skullbee50cal]

You will hit issues with steel case in a new Ak break in period, either too dry, not holding the weapon tight enough. But steel case is a great break in round bc brass will always work well after the break in with steel.

[@pale_2111]

Any chance of S&B making 5.45x39mm?

[@yorkyleefairbank]

When I was in the French foreign legion we used the famas and that used steel case ammo never really had any problems with it.

[@lorq3370]

Sept. 2020 - yeah, have fun finding any.

[@PaintedSkyDweller]

Let’s be real about available ammo right now!

[@gabrielcarkhuff2670]

I hate the whole AR vs. AK battle. You have what you have, it doesn't matter whats better, I got both. I love them equally, each have their pros and cons, don't judge a gun cause it can't give you every little thing you want, cars and women for example, not to be sexist. You can buy all you want, and you could make it the best, except for women, but it's not your decision to choose what sucks and what doesn't. We like what we like, don't be a pessimist cause someone enjoys what they got.

[@rzr2ffe325]

I have both and I think the AR is superior despite its drawbacks

[@polduseri909]

Next week I’m planning to stimulate the gun business

[@mikethorson4031]

Nothing but respect for SFOD-D As for ammo, there are reasons AK's use steel cased corrosive ammo. Its designed fir it and prevents FTE's and problems with cold weather engagements. The AR system was designed for brass. Using steel cased ammo causes FTE's because the coating will stick to the chamber wall. As such, only brass in AR Only steel in AK Its never a good idea to operate a weapon outside of its manufactured specifications

[@zman9415]

Seems like a waste for an AK or SKS, which I believe Larry hints at. Maybe worth looking at if you have one of the few bolt actions in the caliber, like the CZ or Ruger, but otherwise I don't see much point.

[@FWalshingham]

Indoor ranges... all the ones near me don't allow bimetal jacket ammo. Real annoying.

[@jaredgreen5840]

Great ammo but far too expensive for my AK... Maybe if I had one of those CZ 527 bolt guns in 7.62x39 🤔

[@Fire0warrior182]

Amazing channel, always good stuff👊

[@jhsilverstar5292]

Nice seeing a Milled Receiver on that AK!

[@johndonovan5521]

If my guns can't run steel case I don't want it!!!!!

[@regularfather4708]

Yup. All my guns can shoot Steel. If it can't cycle garbage ammo, then what good is it?

[@InTheYear]

Got lots of the S&B.. SP.. great stuff for any 7.62x39.. mini 30, CZ, ak.. great for hunting midsize game

[@everyvillainislemons8712]

All i need is a balaclava & Adidas tracksuit to complete my AK-47 *Heavy Slavic Breathing

[@leejiugs9657]

tri poloski

[@Damonjager09]

Cheeeeeeki breeeeeekiiii!

[@user-ol5mn9np9q]

Stalker game?

[@leejiugs9657]

@@user-ol5mn9np9q yes, cheeki breeki runs in our veins

[@regularfather4708]

Cheeki Breeki, blyat!

[@richardmartin3243]

I would like a 6.5mm Grendel with a hollow cavity like the 7N1 with a Magnum primer for all weather burn

[@wemcal]

Great muzzle control!

[@NuclearGrizzly]

Does the S&B use a harder primer to prevent slam fires with floating firing pins?

[@2549Discovery]

S&B slam fires in my My10X

[@2549Discovery]

Should read "my M10X."

[@NuclearGrizzly]

@@2549Discovery I was concerned about that. My Polytech has a spring loaded primer so there isn't any issue. My other dozen or so AK's will occasionally slam fire with Winchester white box. Even though their firing pins occasionally leave a mark on a steel cased ammo they have never had a slam fire.

[@nathanlewis5682]

Keep the firing pin and firing pin channel clean

[@NuclearGrizzly]

@@nathanlewis5682 The issue is with inertia.

[@OldManMontgomery]

Video dated "Apr 6, 2020. Comment on 8th December 2021. I reload 7.62x39mm to shoot in my CZ bolt rifle. I recently tried to load some S&B brass. After decapping and cleaning, I found primers (Wnchester or CCI) would not seat fully (primer a little proud of the head) UNLESS I deepened the primer pockets with a tool. Could be just one lot, but it is a pain.

[@ceasarjacquez1192]

Larry Vickers a badass,keep up the good work.

[@Chris_Garman]

Canada needs some too, please. And if you think your Soviet rifle is overgassed using surplus, beware the Winchester white box.

[@regularfather4708]

Soviet weapon is not over gassed. Soviet weapon is gassed or it is not gassed.

[@bradborgelt60]

Oh boy looking forward to buying this stuff from sportmans guide for MK211 prices!

[@tacomas9602]

Dad's SKS loves steel case.

[@2Aknight762]

I've chronoed the fmj ammo at 2500 fps from a 16 inch barrel, 1.25 MOA from my AR build.

[@TheVinceZampella]

Reloading AK would be pretty cool

[@hamletthaus3046]

Always love your full auto AK vids!

[@danielmeyer3847]

Seems more like a commercial rather then insight

[@joehelvey5794]

Finding brass in 7.62x39 used to be really rare. Today in 2022 even amid an “ammo situation” it seems pretty plentiful. I’ve seen it on the shelf and quite a bit online.

[@sgt_malice4521]

Brass ammo is rare now, I been stocking up on steel

[@williamryan9195]

Not cheap though.

[@KDX420]

for what its worth, my Ruger American Ranch loves chinese corrosive un-lacquered steel case, no problems extracting.

[@tm1182]

This will be great for yugo pattern rifles, simply because for whatever reason the yugo patterns typically don't have chrome lined bores

[@viggenguy4411]

S&B FMJ is what I've been using in my Valmet M62/S TP. Next best thing to spending $1.50/rd for Lapua!

[@adamak47miller90]

It sucks that Yugoslavian brass ammo was corrosive. I purchased a crate back in 2002 and never opened it to this day. Both tins are still in the wood crate and I only paid $140. Same as the 7.62x54r I still have a Hungarian crate and a crate from Poland. I love collecting ammo its so cool what used to be out there. Now it's all gone and the stuff you can find is so overpriced its sick. I have some great 8mm and 30-06 from Ethiopia that is dam near match grade stuff.

[@bejare2]

I got a 1000 9m FMJ of this S&B for $179. Great performance at a great price!!!

[@saltaddict685]

Boy I miss those prices 😢 I remember about a year or 2 ago I saw the same exact case for 800$

[@smokey90]

the availability of cheap ammo is what makes an SKS or AK desirable to me.

[@Drew-lf4mv]

I would by some if i would ever financially recover from it

[@rzr2ffe325]

"I will never financially recover from this" -Joe Exotic

[@lockedon8953]

I've always been told that running steel in an AK platform is more of a safety thing than a performance thing. Due to its violent action

[@kdcustoms1272]

Never heard that I don't believe. It's been 10+ years since I really looked into it. From what I remember, it was just about cost. Steel case was always way cheaper. I've never had a problem with either in my WASR tho.😁😉

[@retiredafce3373]

I love S&B 45ACP!

[@scfcan5886]

Great ammo for the platforms , the soft point were more accurate than the Hornady SST. But as said in the comments sks or ak just destroys brass casing Take care mister Vickers

[@pakistanzindabad2908]

Hi plz make a video on chinese type 56-2 .... as i listen that thick barrel of chinese aks are reduce the effective rang during firing after 3,4 mag used what do u think??? Becsuse u r the gun expert....

[@twoworldwars4633]

Perfect timing! My dads getting his first AK today! Well, the next ten days :/

[@kelmendi]

just loving that select fire Yugo M70... or is it a M70B?

[@Mmyers1177]

Will they get into the Steel Case Game now that JB banned Russian Ammo Importation?

[@michamichaowski8375]

Who? S&B? They have zero bussines in starting a steel case production line. ZERO. Not economically viable. They are a major NATO and hunting ammo maker. No reason to make cheap combloc ammo.

[@richwhippersnapper]

I have not seen much if any S&W ammunition available on the market for many years. It's good ammunition, and competitively priced. Now that Russian imports were cut off, other Eastern Bloc ammo makers should take over that market

[@minuteman-RN]

Tula or Red Army is where it's at. I just shot a 1 inch group at 100 yards with steel cased Tula last weekend.

[@regularfather4708]

Stop contradicting the elitist gun snob narrative!

[@sqr2024]

I prefer brass but steel case 7.62s works fine in my AR10 and AR15s. Having sad that I will never use corrosive in any of my firearms.

[@mannys9130]

Corrosive ammo is not harmful to the gun in any way as long as you clean it after you shoot it. You can shoot 10,000 rounds of corrosive and non-corrosive ammo side by side in identical guns, and they would wear the same as long as you cleaned the corrosive gun with water based solvent after each session. It's not scary, it's not extra wear, it's not worth any worrying over. I have shot TONS of cheap, corrosive milsurp in 8mm Mauser, x54r, x39, x25, and 8x56R. It all goes bang and it all cleans up just fine. No rust anywhere on my guns. 👍

[@regularfather4708]

@@mannys9130 only thing is, it's a pain in the ass to get out the hot, soapy water after every range session. As long as you're down with that, corrosive is nothing.

[@user-fj5wn9iq5r]

Isn,t the ak variant in video yugoslav one (zastava)

[@megastriker26]

is it possible u made one video about the type blowback, close bolt, delaye those kind of thnig???. i would like to understand that.

[@hambone7777777]

Just bought a bunch of 6.8 SPC. Please keep it shipping. Thx...Soft Point?

[@1982rrose]

My question is about bullet diameter re bolt gn (CZ). I've heard there is difference between US vs Eastern Euro diameters in 30 cal. That CZ prefer the Eastern spec re accuracy. Is this true LAV?

[@m7mikim]

That stuff runs great in my VZ58 and CZ527.

[@chrisedwards9156]

Personally I believe every gun that you own should be able to run steel ammunition, but I'm never disappointed to see someone making ammunition period.

[@paulschab8152]

It is good stuff. I run steel case in my Draco but have run this also. I run brass 5.56 in my SLR106 though.

[@claytonbonds2579]

By far my favorite and I can’t find it anywhere right now.

[@-John-Doe-]

Brass is roughly double the price. Let’s say it’s 30 bucks to replace an extractor. You save that money in 150 rounds?

[@crazymonkey459]

I don't like using brass in my ak because for some reason my rifle will fire with no problem for about 30 to 60 rds and then the nose of a case eventually breaks off inside the chamber and I will have to jam a sreel case round in just to extract the broken piece

[@jerryjohnsonii4181]

S&B ammo is great quality for the price point !!!!!!!!!! I use it a lot in my CZ pistols an other handguns that i have. Absolutely awesome ammo |!!!!!!!!

[@devashishsathe7927]

Hey Larry can you make a video on 7.62*45mm ammunition? Why did it got extinct. And also if recreated can it be used again? Thank you.

[@michamichaowski8375]

Because Czechoslovakia was a part of the Warsaw pact and they had to adopt soviet 7.62x39 ammo. No other reason really.

[@Gun_Talk]

Bruh, 40 rounds of Tula costs 10 bucks though.

[@theblackcock6607]

I don't know about any other caliber but I've used this brand for 303 Brit and the diameter of the bullet is slightly smaller then the 311 that the 303 is supposed to be. And because my Enfield is made in 1916 I'd rather use the best ammo I can find for it even if I do have to pay a little bit more for that ammo. Unfortunately this brand isn't quite it

[@985shane]

Soft points are In stock at sgammo

[@MrSergio608]

Turn up production please. We’re gonna need it now 😂

[@BigFishLittleLake]

Bro every box of 7.62x39 in steel case literally has “no corrosive” on it now a days. Unless your buying some super old ammo your ak will be fine but still always clean it after shooting.