🤜 S P I N D L E __ S A N D E R 🤛

This video is about oscillating spindle sander build from old car parts.
Time code:
00:05 base build
05:32 oscillating mechanism
16:29 legs and wheels
22:08 tilting mechanism
24:39 table top
30:41 sanding drums
33:24 review
Free PDF workbench plans:
drive.google.com/file/d/1-KbT...
More free plans I ever made:
drive.google.com/drive/folder...
Support GRINwood:
PayPal: [e-mail]
Thanks for watching and hope this video was helpful.
GRINwood shop:
www.etsy.com/shop/GRINwood
Follow GRINwood:
/ grinwoodprojects
/ dakhnogregory
/ grinwooddesigns
/ grinwooddesigns
Music:
Parasail - Silent Partner
#woodworking #diy #GRINwoodtools .
Would you like to use my videos in your media projects?
Please contact me: [e-mail]

[@GRINwood]

I made this oscillating spindle sander from old car parts and soviet washing machine motor As always put "+" in the comments if you watched the video to the end - I will know that my work was not in vain👍 Time code: 00:05 base build 05:32 oscillating mechanism 16:29 legs and wheels 22:08 tilting mechanism 24:39 table top 30:41 sanding drums 33:24 review Thanks for watching Free workbench PDF plans: drive.google.com/file/d/1-KbTZ99F6z3vshXUf6iCo3YGpgVU-D90/view?usp=sharing Support GRINwood: PayPal: [e-mail]

[@DickvanZanten]

+ Inventive as ever! Hat's really smart use of existing parts. Where do you live? Soviet stuff is very hard to get here in the netherlands😉 I can only wish I could be as good at metalwork as you are. The ony way to get the big spindle to run smoother is by turning it straight on a lathe. That can be s simple construction like bolting it over an axle with bearings n both sides. Then sanding it round doesn't vibrate as much. Those vibrations give a larger movement at the top of the spindle than at the bottom. That's why you can't get them out with running it from a single sided bearing.

[@user-qx3zc6qn3o]

Ударниі інструменти

[@user-dm6vk1up9f]

Бь? Ътьтю то ТБ то тот ь б Ъ Ъ в Березовки Ъ нъъ от доброе Ъ Ъ отдоброе утродоброе

[@user-gl1dn2ps3y]

Наждачку смолой забивает.

[@franciscolopezarriaga1221]

P

[@jentom6565]

Awesome book that gives you step-by-step photos kzbin.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!

[@mvn128]

Даже если оставить в стороне само изделие. Восхищает профессионализм в самом видеоролике. Режиссура, ускоренные фрагменты повторяющихся операций, акцент замедлением на важных моментах, звукоряд. Просто наглядное пособие КАК нужно снимать видео, чтобы зритель просто не мог оторваться

[@sergeyguryn3876]

талантливый человек во всём талантлив...

[@igorgrif3454]

100 процентов согласен !!!

[@frederickwood9116]

Nice work. Thanks for sharing.

[@user-fv3lm6uf1s]

Только с вжухами лиханул слегка 😊

[@MrTestovTest]

Не знаю, зачем я это посмотрел - точно никогда не повторю. Но не мог оторваться от видео. Суперкласс!!!

[@megavolt0674]

С самого начала думал, оно, не оно ? И таки да, дилдо. Женское счастье. Шутка конечно. Мастер красавчик.

[@tinycuisine6544]

I don't care what you build, I will always watch your videos It's such a pleasure to see you work.

[@user-ct4dz2yc2j]

Вот Вы заморочились! Пусть служит долго и радует надёжностью и удобством!

[@VladimirKajarda]

Гут, сказал бадзёра немец...

[@user-gl9li4ru8z]

Приятно смотреть, когда работает мастер своего дела и занимается любимым делом.

[@dougthomson5544]

Great job, well done. I know I am in a minority and I understand multilingual audiences, but I still like talking in my videos.

[@user-ju1xm5sx2m]

Почти до конца ролика, не мог понять, что это будет. Получилось красиво!

[@user-qu3vm1dy6v]

Отличная работа!👍получился классный станок, все материалы доступны, Браво вам мастер, инженер-конструктор 👍👍👍👏👏🤝

[@valeryshebaldenkov9326]

Особенно станки и инструменты с помощью которых сделан этот станок...

[@keith_hudson]

This dude is freaking remarkable. Seriously one of the most gifted people I've come across on KZbin.

[@ralfkramden9291]

Every time I watch your videos, I think you can't out-do yourself, then you prove me wrong. Great build!

[@northerndarklight5305]

Brilliant. Quality work. Wood. Metal. Welding. Electrical. Mechanical. CNC. Design conception and esthetics. It's all in the details. You sir are an excellent engineer.

[@billi10a]

Стараюсь не смотреть Ваши ролики, Шайтера, Адвоката Егорова по утрам, перед работой, во время завтрака, обязательно всё остынет и на работу опоздаешь!

[@kiankian1588]

Absolutely mesmerizing. If I found a motor that has a cover, I'm afraid to even think about taking the cover off, to make an oscillating sander comprised of old parts and a mixture of wood and metal, hats off to you sir.++++++++++++++++×+++

[@user-hh8gt3jo5s]

Молодець! Гідний проек. Приємно дивитись твої відео, багато чого в тебе можна повчитися. Стрімкий розвиток твого каналу. Здоров'я, і всім нам миру.

[@GRINwood]

Дякую!

[@user-nl9ps6ti5i]

Поражает наличие всякого инструмента. Аж жаба душит. А мастер красава! Долгих творческих лет.

[@garymucher4082]

Nicely designed and manufactured. The reason the large diameter is vibrating is because your only attachment is below the table. So any irregularities will be amplified. Other than making the support shaft solid and balanced perfect, you will just have to deal with it... Thumbs Up! My Grizzly spindle sander has the motor shaft (armature) extend all the way up to the top of every diameter spindle setup. So that helps control the vibrations of any of the diameter spindles installed.

[@karlknatter1462]

Sehr Professionell gearbeitet. Und auch das Video so aufgebaut das es zum Ansehen anspricht.

[@arturlend2297]

No Panie, elegancko to żeś wymyślił i wykonał. Brawo Ty 😎

[@zahracadda3943]

10:35

[@zahracadda3943]

😅ح

[@zahracadda3943]

نع

[@d__dunbar9123]

Love your work, and this one did not disappoint!! Fantastic Job!!! That satisfying grin you make when you see it worked was classic!! Thanks for keeping that clip in there when editing the video!! You rock my friend!!!

[@ianvicedomini2648]

This is beyond amazing, To have the knowledge you have to build something like this makes me terribly jealous to say the least. Building your own is far better than a lot of the ones on the market and the beauty is it's all to your own specifications too. Awesome work and fantastic video mate 👌 👏 👍🏽+

[@user-rj4id9bv5g]

Пятёрка за испольнение. Мородец, желаю дальнейщих творческих успехов.

[@raulsoto2088]

Un placer poder ver tus trabajos, tus videos... Un capo, siempre, gracias, un abrazo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱

[@amana8528]

Идеально, качество сборки на высшем уровне. Работать будет долго. 👍

[@carloshernansalgado2581]

Podría patentarlas y sacarlas al comercio. Sería de gran ayuda para los que trabajamos la madera. Sencillamente espectacular

[@tinom.2455]

Hi Gregory, very Impressive! I realy would to start to rebuild it immediatly, but unfortuately, I dont have enough space in my little workshop. For the wobbly spindle, I think: Threaded rods are mostly not exactly straight and the weight on the end of the spindle (the added wood) let the tiny wobble of the rod rock up tho this shaking. Also the wood could be not exact ballanced. I had this Problem with a homemade disc-sander. The disk was made of Plywood and was shaking too. the only solution with this problem was to make the disk from a more uniform material. I took MDF, and the shaking was done... EDIT: Also if the Pipe is'nt cut EXACTLY 90°, then this could also result in this wobble... Keep going...

[@GRINwood]

Hello, thank you for your comment. Yes, I checked the big sanding drum and it's totally unbalanced plus it's not perfectly round. First I will try to fix the geometry on the lathe, if not helps - will have to change the plywood to more uniform material as you said. Thanks

[@user-ji3cf8fs4l]

Молодец. Мастер. Золотые руки.

[@MCsCreations]

That's just brilliant, Gregory! Fantastic work!!! 😃 Stay safe there with your family! 🖖😊

[@abdullahali5039]

Hi The work is amazing, very wonderful, in the full sense of the word, well done, and totally worth watching Greetings to you and I wish you success and further progress Abdullah from the State of Kuwait

[@tinkersdug1969]

Your skill level is jaw dropping for such a young man !!!

[@alanr745]

Very nice! The vibration with the larger spindle most likely has to do with the laminated plywood circles having some inconsistencies in the layers (voids, denser wood in some places, etc.) creating the vibration when spun. If you have any MDF laying around, that might make for a more balance material for the larger spindle.

[@luisenriquetorres5962]

Pp 1qpqp

[@jujcman]

I think if you take inox screw or hard steel (long screw ) it maybe more stable the long screw in your machine is very week she have durability 6-8 you must take inox or steel who have durability 11 and up

[@landhopper]

First of all, nice job! You can clearly see from the video the big one is spinning out of center. Most lickely due to unbalance and long but thin spindle axle. No (wood) lathe around? A way around it is to make a "brace" for the spindle with a bearing to stabelize the spindle and then sand it with your blok to make it more consistent. After tbat you can balance the big one on the axle! This should take care of most or all of the vibration. Hope this helps

[@user-xl2nv8df2o]

Не учи учёного

[@JohnSmith-ud9ex]

Another beautiful build ! Hopes that you and your family are keeping safe and well in these troubled times. = )

[@luiscarlossuarezmarquez264]

Great, great & great ‼️👏👏👏

[@tokayfeyzioglu3235]

Bravo. Ellerin dert görmesin.

[@naderakhzari7969]

Hello, dear teacher, very beautiful and excellent service in the world, very delicate and accurate, and of course, very solid and practical. It can't be better than this.

[@juanignaciocaino]

great idea! and flawless, no-nonsense execution. The vibration it's due (most likely) to the coupling and using a threaded laminated rod for the extension of the motor spindle. Maybe use a turned 1 piece shaft that has a register taper on the table side so it centers the drums, and has a counterbore for assuring better concentricity at the motor end.

[@fabriciohernandezlopez849]

BUEN DIA.....K HERMOSA MAQUINA A CONSTRUIDO UD.....DE VERDAD K ME A DEJAO IMPRESIONADO.....MUCHAS FELICIDADES.......GRACIAS POR SUS VIDEOS.....BENDICIONES......REYNOSA

[@kellyjones334]

Excellent build. I really enjoyed your craftsmanship.

[@MrZeedine]

I thought my work was good ,but looking at your standard i think better i learn to bake bread instead. My workshop here in Thailand is messy when i look at yours. Thank you. most enjoyable. From an old English guy who is 86 years old.

[@cbcarper9681]

Excellent excellent excellent

[@everythingtv1910]

Thank you for bringing this video to watch. I watch to the end . I read all comments .its interesting. Thank you

[@hokaidosax]

Excellent build! So satisfying video thank you for posting!

[@andifich1]

Absolutely amazing 👍🏻 Thanks for this Video

[@user-lu4px5mr5o]

Отличная идея и прекрасное исполнение!

[@davidwacker1925]

very nice design and as far as the vibration goes, maybe a bushing to center the all thread inside of the tubing. I'll ask my wife, she know everything ;-)

[@hessainaied9039]

ايه الجمال العبقرية والهندسة دي ياسلام ياسلام عليك والله انت مهندس عظيم وممتاز وفوق الممتاز

[@user-dg2fj6fo6b]

Очень благодарен за идею создания шпинделя для шлифовки. Решил повторить ваше изделие, но у меня есть двигатель с длинным валом на двигателе. Купить дорого, я на пенсии. А сделать самому себе будет приятно,тем более что всё есть, и покупать ничего не надо. Спасибо вам и удачных новых поделок.❤❤❤❤

[@djondou1597]

Хорошо, когда руки прямые и голова светлая. 👍

[@KennyMcKornick]

Hello! Pozdrowienia z Polski 👋🔥👋🔥

[@philhunt2031]

👍

[@paulbignell6977]

yet again another worthwhile video to watch

[@woodywood1951]

splendid! maybe the best DIY spindle sander I ever saw

[@captainmort]

GRINwood, all I can say is WOW.👌

[@user-vc5yi6zu7u]

Оппа, побачив, що вимкнулось світло - думаю, певно, Автор наш, українець... Заглянув "Про канал" - так і є! Ну, хто б сумнівався. Удачі Вам, Майстре і миру!

[@Oztripoli]

Another masterpiece! Good job Gregory!!! 👍🏻

[@dariushmilani6760]

It is always a pleasure to watch your videos.👍👍

[@luisguitierrez-yg4jz]

Tu trabajo es extraordinario, todos los detalles resueltos con sumo cuidado, el resultado final, un trabajo con excelencia y una máquina para años. Gracias, te sigo. Saludos desde Costa Rica.

[@tuncerulay7950]

This is a great working . There is innovation, planning and practice. Congratulations.

[@johnmcdonald9977]

A very enjoyable watch! I agree that the vibration has to do with the discs, but it could also be that the spindle is not seated deeply enough! Thank you!

[@MsBrommel]

Top Work,Top Machine

[@andrej.babichev]

Звлипательеое видео. Очень много разных полезных штучек применялось)

[@norbertgallice168]

Super présentation pour une super ponceuse maison ! Bravo et merci du partage....Amitiés de France

[@VORONM]

Высший пилотаж! Аплодирую стоя!!! 👏

[@antonioreinaldodelimareina4527]

Parabéns pelo grande projeto perfeito gostei muito mesmo

[@user-yy7ju3cp5r]

Хорошо мастер, браво! Поклон и уважение.

[@VladimirKajarda]

А-то... о-го-го...

[@user-zm2xj4fg7s]

Лучшее, что я видел за последнее время.

[@user-gv3wu8ld5v]

Absolutely Amazing build.

[@MrWhisper05]

Хорошая работа

[@pitdornhuber750]

Absolut der Hammer 😮👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️

[@allanadams9214]

You’re a genius

[@user-pg4ii1ef8d]

_Відео проковтнув на одному диханні. Як завжди: без води, чітко, лаконічно, зрозуміло, доступно. І пі-пі теж є 🙂.. ну а як же без них. Лише одне запитання, а хід шпинделя не замалий, десь на око 80мм, бо не задіяна верхня частина? Хоча це можна змінити більшою шайбою. Здоров'я і най Бог помогає.

[@JEYD220699]

Excellent work! You can try a solid shaft instead of the aluminium tube for the big spindle. I think it will solve the vibration issue.

[@aldoonoratoberetta2751]

Il genio umano non ha limiti. Bravo

[@ronmurphy9819]

So well done! Thanks for the great ideas.

[@cabman86]

The vibration could be different densities in the stack of the wood pieces. Or there could be a slight bend in the pipe.

[@arvidpaulius7816]

Very cleverly designed and neatly done work! 😉 💙💛✌

[@robertsteele5976]

Very very nice. I watched a video while back where another guy built his own all terrain vehicle, literally from idea to driving it. I like that you took some old car parts/wash machine to make this Oscillating Spindle Sander, let along one would have had to understand and have knowledge that parts you used could be converted for another purpose. Great Job Sir! You done well🙂

[@adilsonbarbosadevasconcelo8966]

Excelente trabalho, parabéns.

[@stekiboy]

Још један одличан видео! ❤️

[@terrystover7365]

Fascinating project and your talent is amazing. You might try balancing the large spindle by drilling holes on the ends.

[@acerjuglans383]

ANOTHER amazing build! + Always impressed, over here in Canada. Stay safe over there.

[@derekisrow1453]

Amazing as always, great job

[@catchulater7483]

Aint you just the smartest thing! 👌🏻 Really… thanks for sharing.

[@renateen1]

Muito bem feito e simples. Funcional e eficiente. Gostei muito. 💯

[@toddkennedy7623]

Amazing job and great craftsmanship

[@jeanjacquesmaillet1258]

très beau travail, pour un petit service. Mais seul le plaisir de fabriquer cette machine compte.

[@evrohouse5626]

Гарна робота 👍

[@Het.Totresh.01]

Просто и четко! Красава!!!

[@dariopeiretti1546]

you are truly a genius

[@user-gr3vt1ow3r]

Смотреть можно долго как все получается легко, мастер своего дела. Вёрстке класс!

[@Andrushka76]

Полезная штука в мастерской, спасибо за видео!

[@user-lg3du4xg8d]

Отличная работа! 👍

[@suparmahadiaji583]

Luar biasa ... Karena dinamo dan sok bekas... Seluruh kemampuan tehnik dan peralatan lengkap dan bagus... Jadi lah hasil karya...

[@user-pn9ft8sl3m]

You are a genius and amazing to watch

[@kevinlt69]

Excellent 😊

[@reutilps]

Maravilha! Saúde, muitas alegrias, mais realizações e muito mais sucesso!

[@Alex_Zakharoff]

Это ж сколько мыслей в голове....а главное, прекрасная нейронная связь их с руками....👍

[@christopherlinger1554]

Awesome project. New subscriber I watched 2 of your videos and now I’m hooked. Can’t wait to see what your building next.

[@christopherlinger1554]

Sorry I forgot the +

[@dejanmilos2301]

This is the best spindle-sander I have seen so far! Good job, man 👏 +

[@GRINwood]

Thanks

[@michaelnovak9766]

Very neat work. In regards to vibration issues. In your shoes I would seriously consider ... Fitting a support guide for that long spindle in the spindle drive box Or I would consider a composite material like nerathene used for bushing with a metal sleeve. It might be better to simply get a suitable sleeve quide made up at a engineering shop. And as another guy said earlier... Try MDF board. But ...do yourself a favor....mill it on a wood lave. Hope this helps 🙂

[@jean-claudefonvieille4555]

Très ingénieux Honneur Monsieur. BRAVO