Today, Mike replaces the door window seals on his 1987 Chevy S10. He also talks a lot and teaches us a thing or two.
Пікірлер: 93
@michaelpetersen789010 күн бұрын
EXCELLENT video for the s10!!!! Thank you!!!
@B9643 жыл бұрын
One of the better step by step instructions I've seen. Thank You.
@peterlukasch85793 жыл бұрын
great video, straightforward and covers everything to do the job, and no annoying camera shake. one of the better instructional videos I've watched.
@coreybailey4173 Жыл бұрын
Thanks a lot your video was great he was telling me I need a window regulator and it's just a channel I took the door part and looked at it thanks a lot for being really in-depth on your videos and keep up the great work sir 😎👌👍
@israelaustin94956 ай бұрын
dude, excellent video. Easy to follow, great camera angles, good explanations. 10/10
@TheApostlex4 жыл бұрын
Great Job...Love it educated me on some minor repairs!
@alexisgranados5144 Жыл бұрын
Thanks for the video!! The shower curtain was a great tip!!
@JulioCesar-pz2mb3 жыл бұрын
I'll save this video for my future 1992 chevrolet s10
@GhostBit85 жыл бұрын
Yes finally found a video so I can fix my 93 s10 window seals, thank you so much
@landonrenigar84882 жыл бұрын
Same
@ifabforfun Жыл бұрын
@@landonrenigar8488 same
@WVgrl598 ай бұрын
Same, 2000 model
@moejoe935 жыл бұрын
Hey Mate! Great Video! I want to restorat my 83 S10 to! Looking forward for new videos!
@rockhaus430855 жыл бұрын
Great video. Just bought a 91 Sonoma. Please post more tutorials. 👍
@kramnull89625 жыл бұрын
Thanks man. My driver's side window had gotten a catch in it about 1/4 the way rolling it up. Well after a year of, "I need to look into that", the window to my surprise ended up cockeyed in the door yesterday.
@BWDriven3 жыл бұрын
I don’t know if you even still use this account but I’d love to see more about this I’ve got my own 84 s10 that I’m gonna start fixing up and turn into a project truck with my dad and stuff like this is nice to watch in general and extremely helpful for me
@JohnLee-ui5gd Жыл бұрын
Thanks man. Going thru the "new to me" 92. S-10. ✌️
@vwmountainman97016 ай бұрын
Very well explained !!! Nice work !!
@philham35055 жыл бұрын
Great vid let's see more of your s10 those ole square bodies are eye candy
@sternthemern70143 жыл бұрын
Agreed my gut. Love my 91 s10
@nickflores3882 ай бұрын
Im respraying the inside of my gmc s15 thanks man
@ceridwenluna3 жыл бұрын
What adhesive did you use to put your moisture barrier up? Thank you for this video. My little '91 S10 is still trucking, but has had trouble with the windows! Your video will be very helpful for my next little project in restoring him (his name is Hugo.)
@dirkmitchell51043 жыл бұрын
Where are all the other parts? This video was well done. Was hoping to watch more of it.
@cat2011o92 жыл бұрын
Me too didn’t realize this was 3 yrs ago 😅
@miguelguevara10893 жыл бұрын
Great video, where did you get the seals?
@evyam.gooberhere2 жыл бұрын
Helpful video. Need to do this soon, truck is so loud on the highway cause all my seals are rotten.
@jimmysullivan61183 жыл бұрын
Very good video .start to the point doing mine next week thanks a lot buddy love the video
@donaldmassaro72764 жыл бұрын
Gently my friend excellent video you have did a magnificent job
@jkane2 жыл бұрын
Carmine red, same as my 86, great video
@3Wheels1Block5 жыл бұрын
I don't know what type of camera trick you used to get that passenger window glass back in, but I'm gonna try it tonight on my sons truck. If this window doesn't break, I will give you a shoutout... it's been 3 days of wrestling with that thing to no avail... LOL
@musclemanmitch33805 жыл бұрын
I did mine without taking the windows out.Just roll it all the way down.
@3Wheels1Block5 жыл бұрын
@@musclemanmitch3380 I got it back in, I will be sure to give you a shout out when I post the video! Thanks
@musclemanmitch33805 жыл бұрын
@@3Wheels1Block on the passenger side it didn't go as easy as the driverside.I spent a couple hours trying to get the front part in then I realized if I took the channel run back off when I rolled the wondow halfway it rocks back and forth.I tilted the window forward towards the fender installed the new window channel then rocked the window back in the channels of the molding and it went fast.I probably could have done it on an hour if I knew that.
@holyman78204 жыл бұрын
Hey man cool video! where can i purchase all the parts that i need to fix my window. i have the same truck. My truck is missing that small peice that connects to that small hole on the window.
@williammurray80604 жыл бұрын
That batwing plastic guide can be found on Ebay
@JoseTorres-oq4dx4 жыл бұрын
bro i been waiting for a video like this thanks
@miguelbariasheredia56503 жыл бұрын
Hello, thank you very much for sharing this video, it has been really interesting and very instructive. I have a s 10 from the year 1985 and I need to buy several spare parts for it. It would be so kind to tell me where I can buy them. Thank you for your attention and kind regards from the Dominican Republic 🇩🇴
@sternthemern70143 жыл бұрын
Hey my man more videos on this maybe?? I have a 91s10 and I'm finally in a place to start slowly restoring things
@miguelbariasheredia56503 жыл бұрын
Hi gentleman! I hope you are well. I have a 1985 s10 pickup and need to purchase several parts for it. You would be so kind to tell me about some stores where I can buy the accessories. Thank you for your attention. Kind regards from R Dominicana 🇩🇴
@danmekeel7758 Жыл бұрын
@@miguelbariasheredia5650 LMC, both doors 178.00 all New, better than Factory,
@tc75843 жыл бұрын
Great job man helped me a ton
@scotteckard8725 жыл бұрын
Where did you buy the seals
@emiliopacheco11767 ай бұрын
Thank you! where did you buy the run chanel for the window
@JesseRomanelli Жыл бұрын
Great video thanks 🙏
@armyblouvet545 жыл бұрын
Hey did you replace the window locking clips? I have yet to find any clips that clip into the window molding and stay. The tabs seems to not hold on the rubber like there to short
@lastplacegarage59255 жыл бұрын
If you are referring to the black clips on the sides of the glass, then yes, I did replace them.
What kind of adhesive did you use to seal the edges of the moisture barrier? (And thank you very much for this. Well done!)
@zacharybolden745310 ай бұрын
Best video ❗️❗️
@JonarRoman4 жыл бұрын
Great video with helpful info. Quick question. When it comes to replacing the vapor barrier, what do you use to adhere it down? I have an 89 s10 that needs the exterior door handles as well as the window seals that you replaced done. I figure I'd get it all out of the way while the door panels are off. I've not poked in so I don't know what the condition of the barriers are. But I'd rather be prepared to replace it than rush around mid project picking things up.
@DVDBLDS4 жыл бұрын
Butyl tape. 3M makes the stuff I've used before.
@JonarRoman4 жыл бұрын
Thanks! I was just going to use Gorillia Tape but that looks like it'll be better.
@HardCoreGarage3 жыл бұрын
Great video!
@brucenichols5402 жыл бұрын
Best version I've seen! Hope you do many more projects...
@Joe_Blo2 жыл бұрын
Was there felt or flocking on replacement rubber?
@southernracing2468 Жыл бұрын
No we just did one and that was the whole reason we ordered it lol it didn’t come with the metal strips to lock it in or nothing like that
@porigense673 жыл бұрын
Nice. Have you done the ones that go across the door
@lilcrots15214 жыл бұрын
Do you have a video on how to lift a 1989 s10
@abramtelligman15892 жыл бұрын
Dope vid
@danielmiller60788 ай бұрын
Thank you
@dano45723 жыл бұрын
very good ,sir!!!
@mikelgarcia2737 Жыл бұрын
Easy work😊
@grntchstrmdws Жыл бұрын
It's very interesting that most of these window channel felt replacement vids for GM trucks do it without removing the glass. It actually looks easier with the window out. But I understand that removing the glass seems scary. Break the glass and you're in a heap of hurt.
@danielcenteno44774 жыл бұрын
Thanks a lot
@ronmann2755 Жыл бұрын
Where do you order your parts? I have a '93 s10.
@ScreamingEagleFTW2 жыл бұрын
what does the moisture barrier protect from moisture?
@rextwelve3 жыл бұрын
Where can I get the metal channel brackets that you said not to damage? Mine was damaged during the disassembly. The channels are pretty easy to find, but I can’t find the metal brackets.
@joshescalon15543 жыл бұрын
LMCtruck.com I think has them, I did however but the whole new kit for this project. Worth it
@jake12.483 жыл бұрын
You can always go to the junkyard, I get tons of small parts like that from there
@ScreamingEagleFTW2 жыл бұрын
what is the purpose of the shower curtain?
@leandrohernandez66573 жыл бұрын
Where is Part 2.
@alonsogutierrez3437 Жыл бұрын
We’re can I order the seals.
@jw65613 жыл бұрын
Hi i have a 91 s10 Chevy blazer an i am putting a new window in the drivers door can you tell me where i can get the glass guides i can not find them any where thank you
@joshescalon15543 жыл бұрын
Try lmctruck
@Acejunior78 ай бұрын
That LMC Truck is awesome. They have hard to find stuff. @@joshescalon1554
@rogelioaguirre4308 Жыл бұрын
Where can I buy the window seals for the 93 s10 please if anyone know please let new know
@isaiazarce54973 жыл бұрын
Hey amigo! Necesito esos hules y no los puedo conseguir aca en Mexico. Que numero de parte son y donde los compraste?
@sinful57043 жыл бұрын
Parts numero 1AWSS00121 por 88 s10
@isaiazarce54973 жыл бұрын
@@sinful5704 muchas gracias amigo! Bendiciones!
@juggsforlife13 жыл бұрын
link to the seals please >.>
@The2step115 жыл бұрын
Link to buy new window seals?
@lolohernandez5455 жыл бұрын
LMC truck for your S10 parts
@Vandalvisuals3 жыл бұрын
Anymore videos?
@daltonm.3793 жыл бұрын
What soundtrack is this
@HazardWolfCorp3 жыл бұрын
Where would one find brand new door panels for a 92 s10?
@keithjohnson26023 жыл бұрын
You can try eBay. I got a pair of used ones for my 93 pretty cheap. You can also try LMC truck for new ones. Just remember to match your color closely. Good luck!
@robertmarsh57862 жыл бұрын
Definitely tell this isn't your 1st install.
@dano45723 жыл бұрын
you should've play some deep purple music in the background instead
@ajf10062 жыл бұрын
Anyone do this and have an issue with the doors shutting?
@belongs_2_the_grave7 күн бұрын
As if the door bushings are out of alignment?
@raulburgos60834 жыл бұрын
Fuuuuuuck i super glues the window lever in when i was mad at the heat now i think im fucked