S13 body kit and over fender install - SHOP CAR - EP 3

[@xjuicebox07]

This is just car ASMR

[@aerowolfusa]

Haha pretty much! I watch a lot of woodworking/making videos like this. Figured I'd try and emulate that type of content but with car stuff.

[@rozin3454]

Watching your videos after we talked about the "no voice/informative audio" is so rad. Your editing is the voice, no need to talk over anything... it does remind me of woodworking vids haha.

[@aerowolfusa]

Thanks man! I'm just out here trying to make car version of @Ishitani Furnitures videos haha.

[@Mltchell]

Very cool need to do this to my non drifting s14 kouki

[@quest8795]

The body kit looks sick, and you were driving well! Third gear was a bit optimistic though lol, I know the struggle 😂

[@aerowolfusa]

Thanks!! Yah 3rd was totally ridiculous but after 2nd had seen so much limited bouncing through that corner might as well try right? haha

[@quest8795]

@@aerowolfusayeah, always worth a try lol. Is it an NA KA engine?

[@aerowolfusa]

That it is! A dual cam one to be specific. Made 150whp on the dyno too! haha *FLEX*

[@quest8795]

@@aerowolfusa well, 150 wheel is enough to have fun haha I'm probably looking at 120 wheel max in my E36, but enough clutch kicks can solve any problem 😎

[@adrienmadden4462]

I know Im asking the wrong place but does anybody know a tool to log back into an instagram account..? I somehow forgot my login password. I love any tricks you can give me.

[@iftnation]

I love those front fenders

[@magaman17]

Nice run at the end

[@carterc174]

Hey man love the video. Your editing is fantastic and makes the video so easy to follow. I was looking to install some of these over fenders on my s13 and was wondering what kind wheel specs I can expect to fit. What's your advice?

[@aerowolfusa]

Thanks for the kind words!! S13's can fit pretty large wheels stock. So with these fenders you can honestly fit just about anything you want. The wheels I'm running at the end of this video are 17x10 +18 and 18x10.5 +12. And Im running 30mm spacers front and rear as well.

[@OPEK.]

You regret cutting those clean fenders yet?

[@aerowolfusa]

Not in the slightest! Stock bodied s-chassis don't interest me at all.

[@OPEK.]

@@aerowolfusa 1-2 more years it will come around😂 nice build tho goes good from what I saw in your more recent vids

[@aerowolfusa]

Haha! I cut my other S13 up 9 years ago and still don't regret it. Appreciate the kind words.

[@Rogerandersonn69]

Dude your energy when drifting is super entertaining to watch. Gives me old Adam LZ vibes. Also I’m from Seattle & moved to ATL recently, I can’t wait to come and drive Pats Acres one day! It’s a dream course for sure. Keep up the good content!

[@aerowolfusa]

Thanks!! PARC is excellent. Especially after they just recently repaved the whole track surface AND the pit area etc. But even without that the scenery makes it the best.

[@InfamousPendarvis]

Really like this edit. Subscribed for sure!

[@madunsumadunsu9368]

Zip tie gang stand up😂😂

[@mix1806]

Very enjoyable video, well done!

[@racinggamecentral5768]

Love this video, would watch daily if you posted. Keep it up

[@aerowolfusa]

Hell yah! Thanks!!

[@saleemk3290]

looks good bro, can’t wait to see it painted

[@globe6076]

Video is amazing especially sound

[@StrayzKid]

looks like youre pretty gripped up

[@vsqic]

looks fucking amazing dude, I'm installing the fenders on my S13 soon

[@aerowolfusa]

THANKS!

[@ryanescourse]

Looks good! Curious what brand are both fender and front bumper supports? Seeing the aftermath kinda makes me happy I got a kbd kit haha

[@aerowolfusa]

The brackets that bolt to the front fenders to support the bumper are made by Auto Collect Storm! Super nifty. And yah... exploding fiberglass gets old pretty fast

[@beardog4226]

What kit and over fenders?

[@aerowolfusa]

Its a PS Duce body kit and Origin Type 3 over fenders.

[@BCalderon009]

Where did you get that bracket you use at 7:25? Great video btw

[@aerowolfusa]

Thanks! That little bracket is from @autocollect_storm

[@BCalderon009]

@@aerowolfusa thanks. But they're currently sold out 😫

[@xxmegabadassxx1137]

What size wheel do you use I’m new to the fitment game

[@henry.mccormick]

Love it

[@azmiii4432]

I like this

[@xapjna2901]

326power🔥

[@EastSlideKillah]

What are those lugnuts I need some for my og racingharts

[@aerowolfusa]

I'm not sure, they were included with the VS-SS when I bought them.

[@nnooe_mk226]

Were you get the sidemirrors from?

[@aerowolfusa]

I scored those Ganadors off of YAJ 4-5 yers back! They were much cheaper back then.

[@driftingbrandonc.6480]

4:16 did you trim the overfender at the glass or elf the overfender sit on top of the glass seal?

[@aerowolfusa]

Yes! I did trim that edge and in many other places as well. I just didn't include any of that in the video.

[@driftingbrandonc.6480]

@@aerowolfusa Nice. I trimmed literally every side. I won't say they fit bad just too much material which is WAY BETTER than not enough. Trimmed trimmed trimmed. Came out super good. The front skark era duct fenders however are no good hahaha

[@escovfx]

would the bumper fit without a fender swap?

[@aerowolfusa]

Yes! You could run that bumper with the stock fenders if you wanted too. It would probably mount up better honestly. The Origin fenders dont fit the best.

[@escovfx]

@@aerowolfusa awesome!! thanks so much incredible video! ❤️🙏

[@A..._Girl_Vacationland_HBIC]

Are the front fenders 50mm?

[@aerowolfusa]

Yes. They are the Origin Type 3 fenders front and rear.

[@miguelcastillo3253]

What overfennders are you running?

[@aerowolfusa]

Origin Type 3 +55mm

[@A..._Girl_Vacationland_HBIC]

What size front fenders are those?

[@aerowolfusa]

55mm!

[@JDeeszzy69]

Where can i get those brakets at 7:58

[@aerowolfusa]

At the time those were sold by @autocollectstorm BUT now @englishtune sells them. www.english-tune.com/product/180sx-bumper-guides

[@korosuchimu1479]

Are you selling the pignose bumper?

[@aerowolfusa]

Are you local to Portland? I would totally sell it.

[@korosuchimu1479]

@@aerowolfusa yes I am. Milwaukie Oregon. Do you have a Instagram? I'll dm you

[@aerowolfusa]

Yup! Hit me up at @aerowolfusa/@jakewolfmiller

[@abymondesir23]

Incredible build and the best quarter panel cut and done right Ive ever seen . Stupid fukn track tho why would they not cut the trees on the outer edge on a damn drift track 🙄

[@aerowolfusa]

THANK YOUUU!I And haha! Those trees are my favorite part of that track! I was just driving like a newb. Parc is seemingly done offering drifting(issues with the county) too so... RIP. The Ep9 video is the last event they ran and the first event I did with the turbo on the car. Glad I was able to squeeze that one in at least!

[@jeremynazario3971]

What is your wheels spec?

[@aerowolfusa]

In this video I'm working with 17x10 +18 Work VS-SS up front and 18x10.5 +12 57DR in the rear.

[@nelsonace14]

what mirrors are these?

[@aerowolfusa]

They are ‘Ganador’ brand mirrors.

[@Strof621]

@@aerowolfusa Hello, where did you find the "deflectors" for this mirrors or for the original mirrors ? Thanks :)

[@nelsonace14]

@@Strof621 it’s their own brand

[@joevdl197]

What wheels are those?

[@aerowolfusa]

F: Work VS-SS R: Rays Gramlight 57DR

[@joevdl197]

@@aerowolfusa thnx man🔥

[@azmiii4432]

This is modification

[@Ben-xp9ft]

Not a s13

[@adamthomas4638]

Idk if you're drifting got better but you're doing way too much hand movements too big go watch fd drivers they make very little adjustments more throttle control than anything I call it hand fricking the wheel your getting a work out with how much work. On the wheel concentrate on that