Safety clutch on Singer/Juki/Consew industrial sewing machines

[@1TAZbug]

This video just saved my sanity, no joke. Thank you.

[@charlesdaniels7672]

I can't thank you enough for the videos that you produce. I have a new console and your videos have proven invaluable.

[@michelegraziani8674]

That's exactly what I was looking for. Thankyou! I'll watch everything you do. Please don't stop! Italy needs you!

[@fishfuxors]

I have a Singer 144W 301. It will not stay in time. I wish I knew how to adjust it so it would. LOVED your video! Thank you so much!

[@lc3585]

Extremely helpful. Outstanding presentation!

[@caddi70]

I've probably watched this 20 times and just now understood exactly how the clutch works. It only made sense when I put on a new spring and it still didn't work. Apparently I wasn't resetting the clutch right and couldn't figure out why it wouldn't spin. Once I understood how the clutch lever popped into the shaft, it made total sense. Taking the machine apart to change the belt was easy. It was the clutch I wasn't understanding. Thanks for the video

[@daniellecarbajal1309]

Thank you for this video! I came on KZbin searching for 2 answers... how to attach the safety clutch spring and the best way to slip the timing belt back on! I love your videos!!

[@magicwandwoodworks591]

At 1:29/7:14 the Clutch is shown where it engages the grooved shaft. Video talks of "synchronization" with thread take-up being at highest point. Question: at what point is the "clutch-key" in the shaft loose enough to cause problems with the fine tuning "hook timing" between belt and upper shaft controlling the Thread take-up? My JUKI 563 is getting old and "clunky" with noise from clutch and "backlash" between clutch->Belt->Thread Take-up chain of events? (About 2-3 Degrees at the hand wheel)

[@optionalbeliefs8734]

oh thank you, saved me a ton of time and money. My little spring is a bit bent but I dont see a big deal. cheers!!

[@juancarlossoraire5205]

gracias por sus videos yo los veo a todos asi areglo mi juki gracias san miguel de tucuman arguentina

[@niole2113]

Thank you! Your You-tube videos are excellent. I suddenly have hope of learning how to get my Consew 226 going! (presume it is similar) I hope you will consider adding to the description a menu-list /play list? of your other related videos, because navigating You-tube is such a spaghetti mess, imo.

[@3000ararat]

Thank you so much for this great 👍 video.

[@vernleeper299]

Very useful thanks for sharing your knowledge.

[@thewhitetdn]

Thank you very much Sir !. You are a life saver!

[@SteveLiddell-z1p]

GREAT ADVICE ,THANKS

[@hosseinhayati9820]

Thank you for sharing your knowledge :)

[@andrewh5988]

Excellent video, thanks so much

[@cassiopeia78rpm]

Great video and info. We really appreciate it

[@deltajohnny]

Excellent video, as always. Thank you very much!!

[@juanrivas6649]

tank you mr Uwe Grosse for your answer

[@mattv8731]

Hello Uwe! Your videos are all very helpful, but I have an issue on a Juki 563 I recently purchased. When I am trying to adjust the stitch length via the "button/cog" method, it is stuck at 14 on the indicator. I cannot turn the wheel. The only time it will turn is if I engage the safety clutch. Do you think it is seized somewhere? I oiled the bejezzus out of it before I even ran it. Any help would be greatly appreciated! Thanks!

[@markjefferis825]

Thanks for the video.

[@wewe365]

I have a juki lu 562. The bobbin keeps getting wads of thread underneath the bobbin case can you tell me why ?

[@ibsoarin]

I am restoring a black Singer 111W153. The lower timing belt pulley is solid and does not have the safety clutch. Would you recommend changing to a safety clutch to protect the hook?

[@challenbertrand8828]

It has been very helpful to me. Thank you.

[@danielavasilcai8]

Thanks very much you helped me God bless you

[@asghardastanai1008]

Hi Grosse ,i have singer 112w115 i am tring to change timing belt,the problem the problem i have,the stitch knob wound not come out.Is it possible to tell me how can pull it out without damaging the parts. thank for your help .

[@johnbartlett9449]

Hello and thank you. What a relief. John McLaren Bartlett

[@cbstrdst4892]

Was very helpful. Thanks.

[@juanrivas6649]

mr gross please do you can to me what kind of tread I can use in my singer 111w155 please

[@enriqueestrada4526]

Muy buen tutorial

[@juanrivas6649]

mr Uwe Grosse I have a singer 111wsv77 I got a question ( if I can use the parts from singer 111w153 to the 111wsv77 please

[@UweXY]

I'm not familiar with the Singer 111wsv77, sorry. In general if the Singer part numbers are identical, then the parts are identical. Compare the parts diagrams/lists for both machines to see which parts are interchangeable. "SV" machines are "special versions". Often there is no documentation available for SV machines. But you can always look at the parts on your machine. Most parts will have a part number stamped on it. Use that part number to search for replacement parts.

[@caddi70]

Bought a clutch spring for my Singer that wasn't even close to being right. Have to do some creative bending on it

[@fishfuxors]

That is the same mechanism on the Singer 144w and the Juki 158

[@hakansensoy1820]

❤❤❤❤❤❤❤❤❤thank you

[@cancelik]

excuse me. Singer's is not adjustable but it is 2 level actuation force clutch. If you engage swivel plate to wider notch which has lower angle, it will trigger with less force. but, after that, catch finger will be functionless, you have to do re-engagements manually. I'm running the machine this way.

[@cristinagonzalez4761]

Hola.. Como hago para ajustar el mecanismo .. Esta suelto y no ajusta..para luego enganchar el alambre pequeño que se salió.

[@TheDenimIndustry]

This helped me. Thanks.

[@thomford100]

Great video! I decided to look here before going to Leatherworker ;-) When describing the Consew clutch you say excenter, is it possible you mean eccentric?

[@carlosdiasdeoliveira4388]

very nice, excelente seus vídeos, comprei uma máquina de costura Columbia 430 para concertar!!! inspinrador seu trabalho, tanks

[@deyanirarodriguez8413]

I need look this vídeo in spanish ,thanks