Singer Safety Clutch

Adjustment of safety clutch on Singer 111, 211, 112, 212 sewing machines as well as the Singer 153 series. Many clones and other manufacturers use this same basic mechanism to prevent damage to the components on the lower shaft.

[@frankk8018]

This is an old video, and I think the author hasn't posted in many years. I would like to thank him, wherever he is, for posting this. Helped me work on a very old machine. Cheers

[@caferjhonson3852]

Thank you very much . I have brother ls2b837 sewing machine and I had exacty the same problem.From a forum site I found this video .. you saved my life..God bless you

[@alvinseaside790]

9 years later, thanks for the video

[@ramloganfracic5761]

Thank you for this important information. I have a sewing machine with this type of mechanism. I never had any problems.,and I am for your explanation .God bless you for IMPARTING your knowledge to the world.

[@ramloganfracic5761]

An error in my writing." I am happy for this explanation ",-

[@shaunsmith9526]

I bought a brand new Consew 339 with a few odd behaviors from the Factory, this video was a good resource.

[@michaelmis]

Thank you so much for taking the time to post this excellent tutorial.

[@hosseinhayati9820]

Thank you for sharing your knowledge :) Learned some thing new today :) I have a Singer 212W140 double needle without this safety mechanism, but the other Singer 145W204 long arm has this safety mechanism. Both have walking foot.

[@thesergeant3524]

Great video! Thank you! I just picked up a 40's (??) 111WSV71 (needle feed) machine and have been going through everything. This video was a great resource, thanks!

[@alexguajardo8352]

Thank you very much. My Juki Lu 1560N safety clutch keeps disengaging for no reason so I will try this and hopefully solve the issue.

[@strangeplanet8313]

You sir are a genius.

[@unit44b]

Saved me taking it miles down into Yorkshire also the money.

[@LuisRodriguez-yi1cc]

Yo conosco esta maquina y es de las mejores con las que yo he trabajado la recomiendo

[@dhscts]

Appreciate your simple straight forward videos. Do you have tips for cleaning gummed up stitch length adjustment? Thanks

[@sswcustomsewing4276]

Thank you

[@nicolehamilton4976]

Do you have any idea where to get the screw that goes in the curved piece that you took the set screw out of in order to tighten the clutch. The one that adjust the play in it I have the 111 any info would help alot

[@thebootmaker2]

is that the same for a 111w103

[@domingogarcia6029]

esta bien es aplicado tengo una makina de poste nolesirbe el remate como le ago

[@GregoryPoche]

Can you show us how to replace the spring?

[@gamaroff100]

Can you help with a problem I have with a Juki LU 563? The clutch does not re-engage the main shaft after resetting the clutch ( I cannot sew). I have tried pressing the right button while turning the belt drive wheel, in the opposite direction ( away from the sewer) according to the instruction manual. The wheel seems to be locked when pressing the button and does not correct the problem. In addition the the stitch length mechanism disengages the clutch each time I try to change the stitch length. Thank you in advance.

[@fishfuxors]

That's also on the 144

[@alvinseaside790]

145-w-205

[@user-tn3iv2hu5l]

Hello sir