How to install a Facnor Headsail Furler on your boat

[@BillB23]

My surmise is that people who argue against furlers don't have to sail short-handed. Nicely done!

[@Antipodean33]

whats their argument against furlers?

[@BillB23]

@@Antipodean33 One argument is that they fail at the worst time. Hell, everything on a boat fails at the worst time. If a furler fails then strike the sail just like a hank-on.

[@Antipodean33]

@@BillB23 I've been looking at a little boat to buy, a ketch cutter and I said to the old fella "pity there's no furlers" and he looked at me like I was a heretic. He said "this boat is built to cross oceans, without all the stuff that breaks" he's a purist

[@jasoncreed6396]

Feel sorry for the Canadian,little rude to publicly state that her was only second choice .id not be helping this guy again after that

[@lesabre1972]

That's great glad to see the upgrade Plucky.

[@joboyjo]

Couple of tips for Facnor and sta-lok fittings. Use anti seize on thread prior to tightening wire terminal occasionally there will be galling of the stainless to stainless thread and it will literally weld together unable to be undone. No need for thread locker on that one it gets done up FT as plukka said. But do use screw thread lock on furler joining screws they will work loose and disappear. Good choice on Facnor I love the gear they build.

[@markbailey6051]

I had this problem of seizing and found it was caused by the sharp end of the wire cutting into the receptor, easy fix is to take the edge off of the end with sand paper, file or grind wheel so it does not bite but slides.

[@clivestainlesssteelwomble7665]

@@markbailey6051 Ive seen one other channel take care to make sure strands dont get caught in the groove.. so they fitted once undid it checked nothing was jammed in the grooves and then retightened it to full Torque.

[@stefanieobermeder2065]

I love these instructional vids. You’re a natural teacher

[@marklapierre5629]

Just one of several hundred things I need to buy for my C-25 resto-mod.

[@davidfisher268]

Congratulations for not loosing one of those screws in the dock or overboard!

[@stephenlucier]

Great to see improvements happening!

[@christinasimpson7750]

Good job guys. Congrats. Now you can clean and paint the inside of your boat.

[@jimlofts5433]

and install a white rocks storage system to keep the sheilas happy

[@nealchristensen1793]

Just fun adventure wisdom no DRAMA load of pineapple's and amazing information ! Thank you !

[@mattparker9726]

NOT ENOUGH PINEAPpLes Also No LiSa REEEEEEEEEEEE!

[@sailor-rick]

Thanks for the expert info... and all the other high quality content.

[@jacobfirst2365]

Nothing wrong with a bit if bromance with the Facnor. ❤️⛵❤️

[@carlvandenberg140]

What a good idea that was.Making life easier and safer.Even with crew it is a great idea.......yes upgrade where and when you can.That eas very positive.Nice Marina too.

[@odysseyofjason]

Hey Plukky 😃 I like this one. Nice work. Top Stuff People !! Cool how you can access the turnbuckle. Never seen that before 🤙

[@arimmer2356]

This is now officially number one sailing channel on YT people.

[@richardcranium8408]

Hey, thanks for taking out the time to make this video. I reviewed it a lot when setting up my LS100. It took me 5 hours total alone.

[@SAILINGintoFREEDOM]

No problem

[@5minpick-me-upswithlorenwa496]

Great information. My Roller Furler needed some TLC & this vid was very helpful

[@andysimons9226]

My ancient Rotostay furler has the track, or foil, which slides up and down. The whole track slides up the forestay, then you turn the furling drum to loosen or tighten the forestay. There are "D" sections sauged on the stay top bottom and centre, the stay has a big bearing at the top so the whole lot turns. Kinda weird, but it works. Although, I'm a bit jealous of your new kit!!

[@markbailey6051]

Very good design. I like to use a good paint instead of sunbrella for my UV protection. It is lighter so not to wight heavy on your sail when it is raining, cheeper and no holes.

[@oldjack3023]

That's very interesting Mark, what kind of paint do you use?

[@timnoneya811]

i agree with jack, that's very interesting. and yes im also very curious to know what paint you use.

[@markbailey6051]

I use a quality opaque wood stain. BEHR premium solid stain 5011 white snd this can be tinted to any color. I also use it on decks. Roll on and shake sand into wet paint, let dry for second coat. Paint the sail cover and Bimini top. Cleans with water and dries fast.

[@oldjack3023]

Thanks Mark I'll give it a go

[@timnoneya811]

@@markbailey6051 Thanks for the great info. I think I'll give it a try on my old 130 Genoa.

[@NearlyNativeNursery]

I truly appreciate you Plukky posting the how to vids. Sure wish you would do more.

[@kevintwiss3495]

That's a nice looking furler!

[@deborahmiorgan829]

It looks like good chromium but we will have to see. I remember Plukky saying that stainless steel and chromium has took a serious nosedive in quality! But I hope for the best always! I love it, step by step, complete install steps. WooHoo!

[@ckh2815]

Nothing wrong with stainless or chrome, unless it was made in china. They have no quality control, no consumer protection and no regulation. Stainless chinese chain has been known to last a whole year, sometimes. All stainless builds corrosion in salt water.

[@troublekaliman]

Awesome! Keep up the greatness that is the pluck meister.

[@harrineher2481]

Nice to see a technical video for a change. But no snorkeling, spearfishing and no girls. comon people.

[@MegaTriumph1]

Good place to tie up to the dock and stay awhile. Explore it looks like a great find in Panama.

[@NZL50505]

I never got your email asking for help! 😊 Well done and good choice on the extra halyard guide. See how you go with furling at normal halyard tension. If the angle is good that should work fine. If you find it catches the halyard (and tries to turn it) and jams at normal tension you can normally ease the halyard a touch to get furling again. And then take a fresh look at the angle adjustment.

[@SAILINGintoFREEDOM]

Thanks NZ champ...

[@tomwilliams8675]

That's going to be a lot safer for you, good to see Peter.

[@jaylindsey7943]

Good day people nicely done plucky that will be a great addition to your boat and all the adventures over the next wave 🌊 cheers sailor friends 🍻

[@SV_Ruli]

I've instal a harken MKIV unit, works simmular, slides up and I can ajust the trunbuckle too.

[@stevethurlow9059]

If you put one wrench on the dock and the other one above the lower one then you can put on more force

[@leadreviewer3257]

Great video beautiful out there

[@willphelps6715]

Good to see you doing some repairs and upgrades on your boat. Smooth sailing, Lad.

[@sonnylange3051]

WOW! Plukky is actually doing some work and not just surrounding himself with pretty girls and fish. :)

[@SAILINGintoFREEDOM]

Harsh

[@danieloliver20]

Great furler install Plukky, I must admit I got a little nervous with that beautiful shiny drum sitting @5:35 at the edge of the dock! 😁

[@SV-DEDICATED]

Thanks Plukky, Just what I needed.

[@pontoonrob7948]

Awesome video. The ones where you teach something are great.

[@Wedontwantnowarnomore]

Very educating people! Cap is a master in furl forestay installations! Rock Hard 🤘

[@KennyP88]

I could have sworn I left a comment this morning. Anyway, nice piece of gear for the boat.

[@roadboat9216]

Very nice. Reminds me of a Pro Furl. Similar design. Great rig! Thanks for the demo. Will look into it.

[@ianh2674]

Very educational pee pol, that will be a great addition to the boat Peter, definitely will be much safer for you when going solo.

[@ulliezaubitzer4752]

Really exciting and very good lession. Thank you! 🙂

[@comfortablynumb9342]

I grew up fishin' in boats but hearing you talk about sailboat stuff is like listening to French, but I'm learning. However FT is pretty easy to understand 😂.

[@nooneanybodyknows7912]

Glad to see you getting quality equipment. 👍

[@eamonncoady9823]

Bloody Norah, telescopic sections, great idea.

[@andrewcarroll2277]

Do the fastnet lighthouse. Will meet you out there, love your vids plucky.

[@markshenstone508]

Very Educational Plucky ! Thanks for sharing 10/10 greetings from 🇦🇬

[@kevinsearle4761]

I like this ! Good to see you building up your home !!!

[@larryoutdoor]

He once flirted with danger, but danger got to clingy. He normally doesn't question himself but when he does he likes his answers. Happy Valentine's day my friend. Stay thirsty🍻.

[@paulb267]

Nothing but quality as always plucky, cheers mate.

[@benlindner5285]

Hey Plucky thanks for the vid, it was of great value to me because my boat came with Stayloks all around and it was great to see your tips on installing them. Ben S/V DAWN

[@63bigmac63]

Great Job Plukky 👏👍👌

[@ctrader6]

Five stars on this video, Captain!

[@Gerard6235]

Excellent work cousin cheers mate.

[@braithmiller]

Keep this up eventually you'll get to painting again.

[@SAILINGintoFREEDOM]

I have to wait till rainy season first

[@Spoon279]

Look who's moving up in the sailing world. What's next, an espresso machine? 🤣

[@DurinSBane-zh9hj]

Nothing dodgy about that install, nicely done

[@SOLDOZER]

I prefer hank on as a solo sailor. Yes they are more work but theres nothing to break or go wrong at all. Furler is fine of you have 3 people to help you unjam it as the sail violently flogs.

[@SAILINGintoFREEDOM]

Sometimes yes...i had to do it by myself once without an autopilot in squally conditions close to reef and rocks....it wasn't good

[@hamishesslemont3705]

Great job - very informative ( and you still managed to inject plenty of humour ) 😊

[@dongeary2219]

Sent you some rehab money, enjoy your videos !

[@SAILINGintoFREEDOM]

Thanks Dub...I need all the help I can get

[@lancesmith7235]

The new intro music is nice.

[@nfinitymarine4466]

You're going to ruin your reputation putting new parts on that boat. 😁 Bonus points for doing DIY videos.

[@jenseggertsen2198]

Lyckely I have a furler, maybe I should have a look on it, very good instructions. see ya Plukky.

[@LoremIpsum1970]

Nice job! Good to see it worked out well and you've now doubled the price of your boat 🤣 Time for a well earned pineapple I think 🍍

[@melinda5777]

How to. I love these kinds of videos. Thanks Capt. P? LOL. ❤🇺🇸⛵🎬🤙

[@mattpovah5952]

Nothing but quality people! :)

[@mariescott9853]

Enjoyed watching your expertise. Thanks!

[@waynecummins9713]

Nicely done mate 👍 👌 👏 🇬🇧

[@dgregor1000]

Job well done 👍

[@markperrins9485]

Great tech film plucky. Luv yu

[@earlsnapp5209]

4th... Great install info.

[@GunShot101]

love watchin plucky you grill and smoke fish the best

[@kimfoots1288]

Great video educational thanks waving hand for Maryland👋

[@geraldinepluyms5935]

Just hearing your voice is good with me. And something substantial. thats up to you , but whatever LOL. Thank you!

[@garrickmartin7707]

Good work laddy. Now. what I would like to see. More sailing. The chickies and the wreck diving are all well and good but are you stuck in Panama? Let's go somewhere!

[@SAILINGintoFREEDOM]

I am stuck without a jib. Saving up so I can move

[@sailingcitrinesunset4065]

Nice video hope it all works well.

[@stephen8086]

don't forget to locktite the scrubscrews

[@RockDodger]

Nice when you can put your engineering degree to good practical use 😉 Hope this comment finds you safe well and happy mate

[@ianprice9005]

Great like the new furler

[@davidfield4432]

Enjoy these plukky. 👍👍👍👍💪💪💪💪👌👌👌👌

[@thomasg1323]

Nicely done.

[@helluvatime4562]

So easy a cave man can do it!!! Nothing but quality here people.

[@gordonclark1711]

Much more single handed sailing? Plucky the fun you have with your crew makes your videos much more entertaining. There is only so much spear fishing and beach barbequing you can do on your own before it gets samey. That said I have no idea for the reasoning behind the decision so we can only wait and see although I do have one observation...not one tongue in cheek comment about your engineering skills. You are slipping mate.

[@SAILINGintoFREEDOM]

Nobody wants to come to my boat ha

[@davetaylor8858]

Very interesting Peter. Hope you don't have to do much sailing single handed.

[@jacksbackable]

Very interesting to see! Thanks for sharing! 😎🐬🏖🌴☀️🇦🇺

[@Corrvision]

Cool Good to know!

[@willslever8112]

super vid

[@63bigmac63]

Plukky do you still get to see your daughters ?

[@Cptnbond]

Excellent episode. Facnor has mixed reviews on some cruiser forums. I guess they have fixed the issues with new models. What model did you install on the boat? Cheers.

[@hughrodgers5171]

Nice job. Safe ⛵

[@billkaroly]

I'm guessing this is close to real-time? No crew?

[@jamesdaley1852]

i loooove reggae music

[@ZipJoy]

Good video? Do you need to change the headsail to suit or just use the existing one already had?

[@thenorseman2804]

This is how you install Facnor furler. DON'T! But if you do, then you have to install a HALYARD LEAD, just like you did. Nice to see you did that. If not, the reflecting wheel gets wear from the helyard that makes grooves. Then you will experience that the grooves hooks on to the helyard and twist it around the forstay profile and jam it. Then a lot of sailors try to furle the sail with the winch. Result: forstay gets twisted the wrong way and brakes the wire cords slowly one by one or all in one big................! . Not fun! But plucky knows a thing or two when it comes to sailing.

[@SAILINGintoFREEDOM]

lets not go overboard with 2 things...occassionaly i know something

[@thenorseman2804]

@@SAILINGintoFREEDOM 🤓

[@patriksandberg338]

This was much better than the zingo.. blah blah shit, thanks

[@kevinh2048]

Happy Valentines Day "People"

[@davidfinley14]

I was watching the interview you had with James (sailing Zargio) and you mentioned the names of the better catamaran's to own for blue water sailing. I didn't catch the names of the manufacturer's because I'm not use to your accent. Please rename those for me to help narrow my search for a quality boat.

[@ConvergTV]

Awesome! Let us know how it performs.

[@TheTandeddu]

oh no! what happened to the new crew?

[@raunomasing4632]

Thank You for the interesting in-depth video. I have exactly same furling system to be installed - but the question is, is it possible to use my regular foresail (genoa) or is a new special sail type required? Thank You in advance!

[@SAILINGintoFREEDOM]

Was it hanked on? You need to get a bolt rope tape sewn on of appropriate diameter... Usually 5 or 6 mm but check

[@andrewthompson2380]

Noticed you didnt use locktite or sealant with screws really need to as they can shake loose!

[@johndodds7949]

I think you need a video sponsor for New Zealand 🇳🇿 sailing champ to bring you un-duz-it deck cleaner for him or her to scrub your deck and clean off the rust marks!😂😀