Dude. The maintenance is as cool as the sailing. Proper craftsmanship.
@davecisneros52854 ай бұрын
I have yet to see a refit series where they weren't given a bunch of stuff from manufacturers or viewers. I'm convinced this is Big Sail trying to trick us into a money pit. I do love the one-handed half assed work that is saved by new product and volunteers.
@samholmessailing4 ай бұрын
You may be on to something
@justinvogt6953 жыл бұрын
Wow! Imagine being out at sea solo and fixing something in that cockpit locker and have the latch fall then... stay safe man.👍
@kevinberger56713 жыл бұрын
yea, I laughed at that thought as well but seems like some sort of latch is needed
@daneulekowski9293 жыл бұрын
I don't care for those latches either, their loud and give awesome bruises.
@luckyschierl78053 жыл бұрын
Reverse the cockpit latches so gravity will always keep the latches open unless when purposely latched
@jeremiah15283 жыл бұрын
I saw Sam way out at sea grab a little rope and jump in the ocean... 2500ft deep.... Just him.... I've actually had a nightmare where it's me jumping in.... except I was right near the ladder.... I could feel the Great White Shark tickling my feet getting ready to eat me....
@dustyjordan4603 жыл бұрын
Yeah, my first thought was "Hah! That's hilarious." My second thought was "Fuck, that's terrifying."
@p42uynot593 жыл бұрын
In this episode it becomes very clear how and why you worked for Disney. Pretty amazing Sam. 🙂 Great work on that boat. It’s gonna be a pretty special boat when you’re done with it.
@johnhanselman63713 жыл бұрын
I enjoyed watching the mom spray Sam with the water hose. They are blessed with each other. Keep the videos coming...
@jamespruett273 жыл бұрын
Super video! I applauded for $2.00 👏
@scott.wallace86253 жыл бұрын
Sam please go back and plug those holes in the battery box. Containment is what a battery box is for. Put a small plastic drain valve in if condensation is a concern I also have a free d8 tractor battery I salvaged. I use an old an old cooler as my battery box perfect fit. Great videos. Thank you
@nodakjohnsful3 жыл бұрын
You are definitely a man of many talents. Thanks for the video.
@alansmollen3 жыл бұрын
Sam, you are so inspiring and every day I see video from Sam I rest play your video the way you talk, your speed your focus on the projects and the fact that you can sew!!! You are truly a gift to those who watch. Ask and you shall receive my friend.
@sailingelectricgitana12863 жыл бұрын
I use OpenSCAD software for designing parts. It's free, open source...after 30 years of being in front of a computer, I've learned not to invest too much time and energy in to proprietary software.
@davidc65103 жыл бұрын
Sam that drogue sea anchor setup is really cool. I don't think any of the other sailing channels I frequent have ever mentioned this type of safety device for heavy sea states. You are quite talented in your improvisation skills to get projects done as well as quite skilled with that SailRite sewing machine. What a beast! Keep up the great work and thanks for sharing.
@mikedee72613 жыл бұрын
Atomvoyages on youtube explains the Jordan Series Drogue well and actually test deploys it and retrieves it. Good learning from Mr. James Baldwin's videos. But Sam is SAM!
@carlbielawski50343 жыл бұрын
You're a very handy and skilled man. Really enjoy your videos and ideas
@Kathleensailorgirl3 жыл бұрын
Sam your skills continue to amaze, I cannot wait to see you back in the water enjoying yourself . Stay safe and healthy ⛵️⛵️😘
@wallacegrommet93433 жыл бұрын
The higher you mount the flood the better. The light will illuminate mist that forms as dew falls. This is known as the milk bottle effect. The angle of incidence equals the angle of reflection. The light is parallel to, and at eye level where you are mounting it. I have been cruising the Puget Sound for 8 years, and often enter anchorages at night. Deck height illumination is little better than darkness. It is worse here as our nights are quite cool year round, so ground level mist after sunset is pronounced.
@littlebustersoysters92293 жыл бұрын
So cool. Thanks for showing this. I have plenty of projects for you when you get back.
@pataulson3 жыл бұрын
Sam ... I just love how you just move on through each project ... no pretentions ... just go ahead and get er done! Great content ... whatever method you choose I will be a fan.
@jdub63343 жыл бұрын
Been here since around 15k subs 100k is comin soon the trip will probably get you there
@joelw20233 жыл бұрын
Things come easy to Sam and Sam takes it easy. Coo Coo Kachoo. Thanks for keeping us updated man. Looking forward to seeing you back out on the water.
@larrydeforest36933 жыл бұрын
I was not able to see clearly, but you may want to have shut-off valves on either side of the filter for saltwater in case you need to change the filter over water?
@cbthomas95773 жыл бұрын
I was right, Sam is a master savant genius! There is nothing he can’t do!
@mammaholmes3 жыл бұрын
In those sappy senior ads parents get to put in the yearbook, I wrote "Sam, we can't wait to see where your creative genius takes you". Agree?! This mom is having so much fun. #i have coolest kids.
@ronaldbeck17623 жыл бұрын
I enjoy your easy-going style. Interesting and informative. I imagine you would be a wonderful teacher ...
@UBRLND-X3 жыл бұрын
nice vid. dig that the light setup friend is sporting a pair of Xero Shoes! very cool.
@327365hp3 жыл бұрын
Great work Sam! I can only imagine how much you could accomplish if you would use both hands! LOL!
@spider08043 жыл бұрын
I like that you show us the filling of crusty wood with epoxy, not just the before and after. Might encourage some people to take on a project or two.
@mammaholmes3 жыл бұрын
Sam, that was a great video. You make things look so easy and are doing a great job of explaining things. I never really knew what a "series drogue" was before, but now it makes complete sense. I learn a little more sailing vocab with each video.
@daneulekowski9293 жыл бұрын
Sam Holmes your a Legend, no one comes even close to holding my attention like your channel.
@joesgaragedoorservice75063 жыл бұрын
Hey Sam how are you. that latch could have been catastrophic at sea alone, so glad you caught this. All the best hopefully i will see you before your passage.
@benlindner52853 жыл бұрын
Hey Sam you are really talented on the sewing machine, great work!
@davidgadbury18323 жыл бұрын
I am really enjoying watching all of the projects and progress. Thanks.
@timharris32033 жыл бұрын
Another great video Sam. Your sewing skills are amazing.
@NatetheAceOfficial3 жыл бұрын
Just some advice on Fusion, you should consider using the "Hole" tool rather than drawing them into your sketches. The Hole tool is just a bit more flexible than having to go back into your sketches to make adjustments later.
@halibut12493 жыл бұрын
Always amazed at your diy ingenuity and resourcefulness. No project is beyond your ability. Also appreciate that you point out your mistakes and do-overs. I had never heard of a drag rope to keep a sail boat from somersaulting, but glad you're preparing for all jic's. The paint on the hull looks great. Really coming along!
@claudeelliott39933 жыл бұрын
Sam, you continue to amaze me with your skills, imagination, and ability to create things on your computer and CAD/3D printer!! More power to you as you continue on your voyages hither and yon. Stay safe but continue to have fun!!
@roadboat92163 жыл бұрын
Sam, your skill set is really impressing me! And your attention to detail. Super improvements.
@Eric-em9qw3 жыл бұрын
Great stuff, Sam. You deserve a few more hundred thousand subscribers - there's lot to learn from here, even if you're not sailing.
@noneofmynameswork13 жыл бұрын
I already know how to sail, but now I feel like I ought to learn to sew an 3d model/print. Seems very useful to be able to do these kinds of things yourself!
@spindlespringsranch31083 жыл бұрын
Your projects are so interesting and you are so talented. Your mom must be so proud of you as you should also be of yourself. Keep the videos coming as you can clearly see that we all enjoy them immensely!!
@dbentley21953 жыл бұрын
Love the 3d printer. Also loosen the tension on your sewing machine a little your stiches will be more uniform and stronger love your channel man ⛵❤👍
@7dalglish3 жыл бұрын
Straight into the content, love it.
@theresedignard42673 жыл бұрын
Ah! Another great knowledge session. What did we ever do before 3D printing? lol You rock, as always! Thanks for sharing.
@uski3 жыл бұрын
I would encourage you to 3D print a cover for the positive battery terminal, so that no accident happens if you drop a tool on it. Also, you could put some ACF-50 (or even Corrosion Block from the same company) in various places to prevent or stop corrosion.
@samholmessailing3 жыл бұрын
Good idea
@jaimeparra273 жыл бұрын
Dude let tell you this.....you are a very talented person. Congratulations and happy sailing😀
@CaptKwame3 жыл бұрын
The cockpit locker hatch latches usually mounted upside down so when the hatch drops, it can’t accidentally close the latch.
@toby41873 жыл бұрын
Always great to see another Sam Holmes video. :)
@dooleyfussle86343 жыл бұрын
Re the daily blog: we'll really miss watching your hair grow out from scene to scene, then get short again! Love the vids, Sam, any way you show them. Keep up the good work
@phlanjo3 жыл бұрын
I don't know about you but I have to hold my remote with my finger on the volume button adjusting from scene to scene whilst grinding my teeth during the one handed drilling sessions ;)
@riftvalleyking95453 жыл бұрын
I'm a new subscriber and I'm hooked. I am a Navy man, my longest trip was from St Thomas USVI to Alexandria Egypt. What you are doing I find far more interesting
@xfoxtrotwiskeykilo9953 жыл бұрын
You have a sweet operation bud ! CHEERS!!!
@xnarcovelero3 жыл бұрын
Very inspiring, a huge hug from Spain ❤️
@bnbailey3 жыл бұрын
Loved the video (as usual). I recently purchased a well-used sailboat that needs some work, but because I am not terribly experienced, I'm nervous about getting out the saw and/or drill. Seeing you do your work helps give me the confidence to dig in to the the jobs that need doing. And I love that you're willing to show your mistakes (like installing the snap backwards). One question on the Series Drogue, though. Once you make it through the storm, how do you retrieve it? With a conventional sea anchor, you can use a trip line to collapse it and bring it in -- that doesn't seem practical with something as long as a Series Drogue. Thanks!
@BostonFishstix3 жыл бұрын
Love watching the progress! Have a similar situation with the hatches on my new-to-me 1975 CD25 and will try a similar solution.
@JohnnyRizon3 жыл бұрын
always great Sam, keep em coming! and thanks for making such great entertainment for us
@thomasweatherford51253 жыл бұрын
Obviously the projects are never ending, but can you go over what projects are left on your list? Great content as usual!
@MarkRyanAB3 жыл бұрын
This would be great. A list of what needs to be done before it's back in the water and then the plan for after that.
@johnhanselman63713 жыл бұрын
I suspect the list of projects and potential project that are left are so many that Sam does not have the time to mention or explain many of them. And then there is always emergency unplanned projects that popup daily like trapping a rat that makes noise at night in the attic.
@thomasweatherford51253 жыл бұрын
@@johnhanselman6371 - I’m sure you’re right. My aunt and uncle had a large sailboat for a long time and I remember them saying, “there’s always a project to do on a sailboat!”
@RobHaren3 жыл бұрын
Can you explain Pantrion website, I’m not familiar with it. I’m still fascinated with the 3D printer and how easy you make it look. I can’t wait to see Pickle back in the water! Rob
@RechargeableLithium3 жыл бұрын
Hi Robert - I can handle this question. Patreon is a Membership/Sponsorship platform that gives us a way to support Sam. Patreon.com/samholmes
@vinceglauser47703 жыл бұрын
My parents had a large foot locker in the garage. I decided to climb in to determine if it could hold me and the god-dang lid fell shut and the latch locked. I couldn't get out for few seconds. I was scared.
@andrewfergcorpcom3 жыл бұрын
Your caliper should have a depth probe/rod at the end that you can use to get measurements like you did in the beginning...probably a bit easier than trying to get the inside jaws in there.
@doninhawaii44333 жыл бұрын
A ton equals 100 projects left before sailing date!!! Yikes!!!👍🤙
@stephenkillick58123 жыл бұрын
The life of a sail boat owner - the list of projects never seems to get shorter! Fix something and one or two other things go awry!
@davewestner3 жыл бұрын
I always seem to have questions, and I can't help but wonder if I missed something as I was watching this, so apologies if this was answered in the video 1) Using seawater for dishes. Wouldn't that corrode the plumbing extra quickly? 2) how many gallons of water is max capacity for this boat, and how much of it is drinking water compared to general use water (it was mentioned that the tank that was being cleaned wasn't used for drinking water)? thanks!
@tednottodd3 жыл бұрын
All of the plumbing is plastic, except for maybe the faucet and the brass sea cocks. Having one fresh and one salt water faucet for the sink is really common, my little 27’ boat had both, until I took the salt out because I never use it. If you are going on long passages, you could never carry enough fresh water to was dishes, so you would have to was them in the cockpit if you didn’t have a salt water faucet. Fresh water tanks on boats are notoriously dirty so many people don’t drink the water from them. They use it for cooking. His is probably 40 gallons, which doesn’t go far on a passage
@davewestner3 жыл бұрын
@@tednottodd Thanks for the info! So what do you use for drinking water? Bottled?
@tednottodd3 жыл бұрын
@@davewestner Many times you'll see boats with the blue jerry cans on the rail. That is water in those cans. we just do short trips, so for us carrying water is no big deal. We will actually drink out of our tank, we don't have any issues with the taste, and we filter it.
@davewestner3 жыл бұрын
@@tednottodd awesome, thanks for the info! I know next to nothing about the sailing world.....fun seeing a glimpse into it from time to time.
@richardbohlingsr34903 жыл бұрын
The Sailrite has plenty of power to sew heavy layers of fabric. Jobs are getting done.
@douglasparvin27803 жыл бұрын
I like watching your boat project videos. It shows what owning a boat really entails.
@kehenabeach44183 жыл бұрын
Also shows that boating & yachting isn’t just for millionaires!
@greggromack83193 жыл бұрын
Sam you make it look so easy:) Enjoy your videos. Thanks for sharing.
@mammaholmes3 жыл бұрын
Anyone else old enough to remember the "HI BOB" drinking game? How about a rendition of "I'M JUST GOING TO OVER-DRILL AND FILL THESE HOLES". I've said it before-- his next boat should be called "swiss cheese".
@dustyjordan4603 жыл бұрын
When you said you locked yourself in your locker, at first I laughed and thought "that's hilarious," then "wait, that's pretty terrifying actually." Another user in the comments suggested reversing the latches so gravity always keeps them open. Great idea.
@Sp3ktral223 жыл бұрын
Sam. sorry to be a pain as you have just packed the Series Drogue. I would love to see the system laid out in your yard so you can see the length and size of the whole system. Do you think you could do this and show us please?
@karpiedewlap36543 жыл бұрын
Get real...
@bake1623 жыл бұрын
The arch pads were slick
@fredziffle68433 жыл бұрын
dont forget the Never Sez for your bolts
@liamkelly46843 жыл бұрын
How you put the rope in the bag is how you stuff throwropes for whitewater rescue.
@SethVanHuss3 жыл бұрын
Thanks for showing us Fusion!
@johnoflegend15293 жыл бұрын
More frequent videos - YES!
@Nik-gh6gz3 жыл бұрын
Sam you should make canvas bags to sell to patrons and subscribers!
@imagiossailingandgaming9405 Жыл бұрын
Hi Sam, one question, how reliable are the PETG prints after a year? I see you are using 3D printing a lot, great tool to have. I'm just curious how the prints are holding up after time, I mean you can always print new ones, just not on the sea, as the motion would get the printer quite crazy :D Seriously how are they holding up?
@williambromley54513 жыл бұрын
You are a jack of all trades..👍
@frankhoran27943 жыл бұрын
Hey Sam great work. A couple videos back you 3D printed some shutters for your port windows. Would you be willing to share your files for that print, or do a video showing how you did it. I have been trying to do something similar but with no success. Just thought I would ask, keep posting vids and looking forward to watching you get back out on the water soon.
@samholmessailing3 жыл бұрын
I still need to make a few tweaks to the file and print the rest of them but I will release it once it’s ready
@norwaywithpal3 жыл бұрын
Doing a great job! Greetings from Oslo Norway
@merrymoppet3 жыл бұрын
Nylon has some stretch, dyneema does not, what will be the consequence for the boat loads when you deploy the drogue?
@samholmessailing3 жыл бұрын
Ive read dyneema is better for a series drogue also because it does not stretch like nylon. Win win.
@flxsuki3 жыл бұрын
I like everything about this video!
@johnmanning48953 жыл бұрын
Will that light on your bow pulpit take the beating from the ocean? Never seen anything mounted there like that.
@samholmessailing3 жыл бұрын
The mount will but the electronics will fail eventually
@AaronGrogan3 жыл бұрын
If you like to retain ownership of your work, check out FreeCAD. My expectations were low when I first tried it out, so I had already budgeted for expensive commercial software, but FreeCAD has served me well for many years now. It was not surprising to see Autodesk impose significant limitations on the free tier of Fusion 360 as soon as it became popular.
@calvingarrett32453 жыл бұрын
Looking Good Sam keep up the good work please get a tripod for your phone when you're filming with one hand I'm sure you could do two projects with both hands at the same time hahaha anyway I have a tripod for my phone if I want to watch videos it comes in handy you can get one of those short ones that are extendable to about 12in they work great that would make your job a lot easier holding nuts and bolts and tightening the other side anyway Sam have a good one God bless you Ray Garrett from Roseville California USA
@tonywrobleski51853 жыл бұрын
Thanks Sam
@stephenkillick58123 жыл бұрын
I am convinced that if the printer was larger, you could even attempt to print a new Pickled Herring hull!
@johantaube30223 жыл бұрын
Haha yeah! I know of a research project in sweden, where they 3D printed a dinghy. So it's definitely possible!
@brianbarnes77743 жыл бұрын
Sam, the Boat looks better, every time I see it! Please keep posting videos on youtube. I would truly miss you if you didn't share videos here.
@jackrabbit50473 жыл бұрын
Quite impressive how you made those pads with the 3D printer - is that plastic UV resistant?
@SuperKingslaw3 жыл бұрын
I am sure you can paint it with UV resistant Epoxy.
@tednottodd3 жыл бұрын
He mentioned he was using UV resistant material
@johantaube30223 жыл бұрын
Isn't one of the main purposes of a battery box to catch leaking battery acid? The holes world completely negate this purpose. Or am I mistaken?
@samholmessailing3 жыл бұрын
Maybe but these are sealed agms so its not a concern
@mikedee72613 жыл бұрын
@@samholmessailing I thought it was primarily to be USCG compliant...
@markking56053 жыл бұрын
love your videos. post more
@kirby.hofman3 жыл бұрын
Sam..u need a sander in your shop!
@SteifWood3 жыл бұрын
When most sailing channels go offshore for projects and fixes the boat normally looks spiffier when done. So not for Sam who gets stuff done, and the h.... with looks and aesthetics. At least Sam is actually sailing (or will be) while many of us are just coach sailors ,,, hahaha
@1pottercounty3 жыл бұрын
I think I would have free handed this with a piece of black ABS using my standup belt sander. I’m too impatient for 3D printers. I know it’s a technology perk but I’m more of a hands on guy.
@vxnova13 жыл бұрын
Daily / weekly updates would be awesome,
@SteveDave2273 жыл бұрын
Does amazing 3D extrusion with super-versatile software. ...uses inches. :(
@bryonensminger74623 жыл бұрын
You need to do a final rince of the water tanks using bleach and scalding water
@derroncook14023 жыл бұрын
That owl shirt!
@dosquats3 жыл бұрын
Awesome! Love your work
@chuckleber34843 жыл бұрын
Is your 3D printer media strong enough?
@darosa57413 жыл бұрын
This is the only sailboat refit series where all the boat works are done one-handed. You really ought to get one of those camera holders that you can strap to your forehead. This would free up both hands... Just joking. I'm enjoying your adventures.
@Larrylunchmeat3 жыл бұрын
Keep it up Sam!
@NatetheAceOfficial3 жыл бұрын
Sam CAD Time?! Yes please!
@richmorpurgo55543 жыл бұрын
just turn the cockpit latch over, It can't lock you in then. Or, send them to me!
@moonalau9388 Жыл бұрын
Can you share a recipe or sketch/template?
@01AceAlpha3 жыл бұрын
You are at the opposite end of the spectrum from Mads at Saillife. While he is hyper meticulous you are hammering through this refit. You know from your experience what YOU need, if it’s not practical it’s gone. It’s all about function! You are both amazing. It’s good to see the different approaches to a rebuild.