Samsung Galaxy S6 LCD Replacement Tech MD

[@martinfinke6034]

Thanks for helping me bring my s6 back from the dead!

[@victorgatsby5455]

Followed this video and broke my phone beyond repair. Awesome.

[@fromdeathtolifeinjesus9324]

Hello sir, i changed i did all steps and everything works fine and everything sitting good on the write palace till the last step 20:32 when i insert the second half of the phone the display don't go down on the upper half . I don't know why and what to do ? Can you help me please. Thanks in advance.

[@ferrebral4619]

Count the screws?

[@interestingspagetti]

151 Thumbs down. Why? All these vid's help Thank you uploader, you have a new sub

[@Harlem_Sheik6]

Looks like someone was having some trouble with the police in GTA V 😂

[@subodhkoirala4259]

Does it really need to have a heat gun? Can a hair blower can do?

[@TechMDYoutube]

+sam kay Not sure I haven't tried!

[@iMiamiChannel]

+sam kay Maybe if you heat it for a long time it might work

[@dalethomasdewitt]

Make a friken cone and tape it to the hairdryer.

[@jefris]

how much was the new screen sir from china?

[@martinfinke6034]

For me €30 from aliexpress

[@saleshideo5293]

Sir you selling S6 screen I need one for my phone

[@anzebzk]

Hi. I have Samsung S6. On the back of the phone is mark SM-G930F. I can’t find new Lcd screen with the same mark. Are other marks like (G920 G920F G920A G920T G920I) compatible with my phone? Thanks for helping

[@ImranSidabutar]

can i replace screen G920I version with G920F (Global)?

[@mrigendranarayansingh9304]

Sir how to order this lcd display of s6

[@justincaven6914]

How much will u chars for skrean replacement on Galaxy s6

[@Snib1]

+Justin Caven SKREAN

[@mobbn973]

i SKREAN, you SKREAN, we all SKREAN for iceSKREAN

[@markherring3513]

I think i screwed my s6 up ...i accidentally cut that tiny ribbon cable that is part of the lower left button next to home button. Did this ruin my phone permanently? My new digitizer arrives tomorrow. If my phone is no longer repairable i wont even open the digitizer and i’ll send it back where i bought it.

[@dalethomasdewitt]

Could have replaced the $7 charging board at that point with zero labor. That video unfocus was bullshit with a b.. The light acetone cleanup was very good to know considering hints of cleanup pointed to IPA instead. Thanks

[@Squiddles]

So I just did one, the recent apps button isnt lighting up or able to be used. The previous screen was totally damaged, and not able to be used with the back or recent apps button (including LCD was busted) could that have been the main cause of it not working after, or another reason? Thanks for these videos man!

[@TechMDYoutube]

it's unlikely it was damaged before hand. You most likely damaged it during the repair. Which is the charge port replacement in order to fix it.

[@Squiddles]

Thanks for the tip. Charging it works just fine. Don't use the recent app button much so I'm not to concern right now.

[@TechMDYoutube]

+Mychal Hix (_SillySquid_) okay I was just letting you know the charging dock is part of that recent button

[@Squiddles]

I appreciate it. At least now I do know what to do incase I need to fix it at some point. Thanks a lot Dustin!

[@axelgs11]

The dexterity shown by this man reminds of an olde English saying..like a pig loading an air gun have tried a hammer mate

[@harshilshah8586]

Kya rate ki hai display

[@tonybimson6158]

Remember to leave the seal gasket on the glass surface not the phone frame and start lifting and prying glass from the centre along the sides of the phone

[@GoGo-cl7qy]

Can i pay u to repair mine please the screen wont turn on and the owner who is selling it to me says the lcd needs replacement

[@TechMDYoutube]

Yes

[@GoGo-cl7qy]

@@TechMDKZbin ok my email is [e-mail]

[@sademokid15]

I managed to replace my screen but whenever I turn it on it comes up with gray lines any suggestion? I feel like did something wrong

[@nercules1193]

Bad connection with lcd en mb, make sure there is no dust between the connections and the connections are clean. (The cable to connect lcd to mb)

[@kellycorbin3561]

my s6 fell in to the toilet for less than a minute but it stop working. is there any hope for my phone

[@fasthead]

No send it to me ! Thank you

[@ciarancampbell8478]

The butcher sticks again Why would anyone use your services when you treat the devices like s**t

[@TechMDYoutube]

watch my newest video on the Nexus 5 x and you'll get a good opinion on what I think of people like you

[@ciarancampbell8478]

+Tech MD KZbin I'll pass Just keep doing your repairs on your dining room table keep up the good work 👌

[@TechMDYoutube]

+ciaran campbell lol why are you watching my old videos anyways and then judging me. these are my beginner videos. I'm in a different location different place I stopped doing the videos at home because people like seeing it in an actual office

[@mondoburger9535]

Hi, did you lose the data inside after replacing it?

[@sunnyvara8502]

Some advise my friend......use playing cards next time !!

[@kelvinkagambo7527]

So on buying a replacement for the broken screen. Should I buy assembly with frame or just display Glass Panel only?

[@petromix5296]

Do you Wana Fix my s6

[@morganhead6618]

how much would you charge to fix a galaxy s6 lcd and screen??

[@TechMDYoutube]

Morgan Logan way to much. Pricing is going way up! 280 right now but keep changing

[@morganhead6618]

okay. the one store told me they'd do it for 150 I was just looking to see if I can find a lower price

[@fasthead]

£93 total now & all other parts really cheap

[@danielurquiza1344]

can't you use a heat gun for takening the frount off?? oh you missed a screw?? damn

[@phonesensei8795]

Yes you can about a nine dollar hairdryer from Walmart you want to get the higher wattage but absolutely it will burn the LCDs if you get it too hot and hold it in one place for too long so make sure you keep the fluid motion up and down the sides and across the front down the middle never staying in one place too long this will ensure that you heat the device evenly which is key

[@squidgames_mingle]

My S6 screen got frozen randomly, phone restart in dark dimm dispaly like pink and black, after Samsung logo brightness come. What is the main fault?LCD, panel, board?

[@fasthead]

cheap knock off lcd digitiser, try pressing n hold power n volume up button simultaneous

[@cramanthesalmon2880]

16:36 this is painful lmao,, and guys like he has said these are older videos so dont hassle him lol

[@PeakyBlinder]

he used to be a dentist

[@01snox]

Thank you, Thank you, mister

[@pilotflorencia1369]

This dude don't look like he knows what he is doing. With his fake ass acting like he cares about the device 😂😂

[@PeakyBlinder]

Hi all, I need a bit of Help/advice here. my touch screen broke and I can't unlock the phone to grab the data from the phone. I have been told I need a £200 pound touch pad fitted to be able to unlock my phone. the insurance will replace my phone but won't fix it. I need all the contacts pictures ect. my thought was this, i have 2 identical s6's if I remove the back from a working s6 and remove the back from my broken s6 then pull the main board out of both phones and put my main board into the good s6 could I then power up the good s6 and unlock my phone and move the data from it. then put the original board back into the working phone and re-stick it. long story short is the hard drive and operating system on the main board so I can swap boards to retrieve my data . I get my S8 in 2 weeks so I don't want to spend £200 just to retrieve my data. I have no backup and my s6 don't show up on my Samsung account as I never got round to registering it. would my idea work.? if i can do this i wouldn't need to remove the battery or the front of the phone as all the stuff stored on the phone should be on the hard drive and if the hard drive is on the main board i cant see why this wont work, all i need to to gain access to my lock screen so it all shows up on my pc. i have posted this question on a few vids so sorry if you have read it once or twice but i desperately need to get this sorted as my insurance runs out in 1 month and i really dont need the £200 cost of replacing the touch-pad on my broken phone when i can get a new one on the insurance, i just need the data from it then they can have the broken phone. thanks in advance.

[@LondonCarnaval]

Hi. just wondering if you got any replies and did you try your method and if it worked as i have the same problem. Thanks a million in advance and kind regards.

[@joshrgaming2606]

I've watched you repair 2 Galaxy S6 on KZbin, and both times you forgot a screw and tried to rip put the screen/frame. Remove the old back adhesive so you can see all the screws, or count the screws. What a hack.

[@TechMDYoutube]

Yeah my old stuff is not the greatest. I tried to focus on quality on the newer stuff thanks for pointing out my old mistakes

[@Miko_Buay_1994]

i hear someone play GTA5 in the background

[@JohnWick-tv7xx]

I thought it was my brother on my ps4😂......anyway responding 2 years lately

[@abdulbasitabdulbasit7046]

Not ok anari

[@Wlx006]

What are u doing there! Not that way men...

[@antiquemb2916]

Awesome vid thanks

[@carlosulloa2734]

Hey can you please answer something for me. I purchased a screen on ebay for s6 and the description said sm-920f i went ahead and purchased it because i havent seen anyone mention that theres any differentiations between the models but my model is a sm-g920v. Can you please confirm whether the screen is different or incompatible.

[@fasthead]

you should buy the one for your model.

[@I-am-SaltyPeanut]

15min 25sec is when you killed that led, I was thinking at the time the temperature of that gun is way to hot to be holding it still. And to all you people who think he's being heavy handed with it, go and have a look at how these components are thrown around in the manufacturing processes, they are not as delicate as you would think.

[@fasthead]

looks like he likes his steak very very very well done. too much heat for far to long, i was surprised that he hadn't melted all the internal ribbon cables

[@AbHajiHadi]

Pretty rough handling

[@mehmet81ful]

You should be centil and very easy to open lcd

[@larryromain]

wow this was painful to watch....

[@luisaaristizabal9929]

Ha ha ha ha not gentle at all, and at points he doesn't even know what he is doing lot but good video to learn what not to do

[@badunicorngaming5956]

i was gonna say that, he had no care in the world about how he handled it. i repair phones for family and friends and you have to handle with extreme care. like seriously

[@SciFer3321]

Luisa Aristizabal Exactly,! This video should be titled "How Not to Repair a Samsung Phone"

[@Belda99]

Wouldn't be surprised to see a crawl bar being used to open the phone just because not all screws were removed. The tools and way the phone it's handled it's so unprofessional. Surprisingly, there is only one thing he damaged (the light won't turn on). This kind of handling it shows how inexperienced the person who does it is.

[@phonesensei8795]

What's up Dustin my brother from another mother my mentor the man who open the gates to the land of milk and honey. These videos will guide you guys pay attention this man is letting out very expensive knowledge but I know because I went the other route and paid for it before I discovered him we linked up Will and the rest is as you say history. You are talking to more listening to technician number one of this franchise in there will never be a number higher the number one I was the first to join taking MD very proud to say so I support this movement and if everyone can get half as passionate as me and Dustin then we will take this country bus storm nationwide advertising maybe even a Super Bowl commercial you never know the sky is not the limit it is only a few. One quick thing though buddy why China for the galaxy S6 screen. SMH you know better than that.

[@fasthead]

Please don't pry the connectors off with a metal tool like this guy did or you may cause a short damaging the modules which will then need replacing.

[@steveyelbows414]

You can just be gentle and use a plastic pry tool

[@WediSarah]

nice watch :)

[@mehmet81ful]

You must learn how to open it you are not professional ..

[@justinccagle]

next time that phone is taken apart, all of the ribbons on the sub-frame are gone. way to much adhesive.

[@fasthead]

& heat !

[@Lilcrippledkid]

urgh.... he isnt very gentle!

[@wilfromkc]

I was going to fix my s6 with a broken lcd, but then I realized you can find a used working s6 cheaper than a new lcd.

[@bfcbc143]

Very bad experience

[@tonyfernandez4979]

Holy Christ dude.. its not a happy meal!

[@jsaddler012345]

dont do as he does bad way

[@mehmet81ful]

Fuck it's stibut work

[@MagicGuitara]

The worst disassembly ever!

[@jajayaboy]

Round and around he goes until he melts the fucking battery!!!! Your videos make me angry!

[@عليعلي-غ5غ9غ]

كبر

[@trevortolhurst6933]

One word.... Butcher

[@victorpopa4871]

Poor phone...shit work !! Sorry

[@clarkpateno7556]

worst repair. lol