Samsung S6 Charging port Replacement

✅ Charging Connector HERE 👉 👉 s.click.aliexpress.com/e/_AT1w0n
❤️Tools HERE 👉 movilone.eu
Samsung S6 Charging port Replacement.
How to replace your S6 charging
Samsung galaxy S6... not charging
Galaxy S6 charging port replacement.
How to replace the fixed charging port Samsung Galaxy S6.

[@MovilonePhoneRepair]

*✅ Tools HERE* 👉👉 https:movilone.eu

[@lucamartin3012]

A tip for everyone, very IMPORTANT! When you barely separate the display plate for changing the little board, just separe it completely and then use glue for reassembling after cleaning from all the old glue. If you only separate corners like him the phone edges remains raised. Thank you for the video btw.

[@emadhamidnaja]

That's what i was about to comment He made the thing even worse And heat gun is never an option for such devices Heat plate would have been a lot better Which could evenly spread heat all around the frame. Then he used cards and guitar picks to hold the screen , damn i remember these OLEDs are as fragile as eggshells. Lucky him he didn't kill the screen

[@izan31]

Thanks a lot. Just what I needed and succeeded. I didn't open the front screen that far and also worked. Biggest problem was the upper right screw.. totally stuck and eventually worn out. Scraped away the plastic around it until I could lift the whole thing around/over it. Thanks again.

[@gregcrooks5181]

I also broke my lcd screen doing this repair using this tutorial. It's very easy to break, so be very careful and use multiple videos and walk throughs because this one doesn't have much detail at the most important part.

[@Tony-ub2rp]

arent s6 amoled?

[@krispyhd9484]

@@Tony-ub2rp I think that’s what he meant unless it was some cheap replacement

[@wiseone39]

why didn't I come here all this time. pretty good demonstrations and easy to follow instructions. Thank you👍

[@MovilonePhoneRepair]

Thank you for watching! Best regards

[@misi4782]

Do you use the same glue left on the lcd or did you place additional strips? Thx

[@MovilonePhoneRepair]

Hello, Mi si! i recomment T7000 or B7000, dependieng of the colour of the device. One is transparent and the other one is black. Thanks for asking! Best regards

[@caliusmaurus947]

What are the uses of this black that found in the betri

[@byJS93]

hace falta abrir la pantalla para poner esos flex de ajuste por detrás? no es mejor cortarlos y no ponerlos? así de esa manera te ahorra de tener que tocar la pantalla...

[@MovilonePhoneRepair]

Hola, Byjs93! El flex con accesorios + conector de carga es que se reemplaza. Esta es una manera de trabajarlo y si,en este caso, hay que reemplazarlo todo. Un saludo y gracias por preguntar

[@kappan_bunog1962]

great job,and thank you for sharing your video..but anyway by next time bro,you show the finished product if will succesfully charge or not..thank you..

[@daveyfromdownsouth7889]

Great vid i am 14 yrs old and i was able to follow this very well i fixd my moms charging port with no problems and now it works fine thanks

[@MovilonePhoneRepair]

:) I m so glad to hear that, Jonespvp! Thank you for watching and if you need more information, any time...i ll be glad to help you! Best regards

[@kariwatanabe200SX]

A big thanks ! For me it is vert well explained ! Continue like this....see you next time , maybe!

[@GameplayOkay]

Do you need new adheisive of will the old stuff work once heated

[@LBSiUK]

New adhesive required. I would use double sided tape that is made for phones.

[@ahmadahmadiar7724]

TNX

[@MovilonePhoneRepair]

Hello, Ahmad! Thank you, too for watching! Have a nice day!

[@soradeso]

would have been nice to see more clearly how the two connectors behind the front glass go. If you attempt replacing the connectors from behind the front screen the way it is shown you are most likely to damage the lcd lining. or break the glass. the lcd screen is the most expensive part on your mobile phone! What i learn in the process: 1- the front screen is paper thin. it is better to try to lift it while a screen protector in on it. which acts as a stronger support. but to do it properly it is best to remove the screen assembly and fit the connectors properly 2- behind the front screen there is a sheet of black plasticky stuff, try not to tear it apart, the connectors should go behind the film, which is let's say near impossible if you attempt it the way it is shown on this video . to tackle properly use a business card and slide it under the bezel from under the battery. you might need to heat the front screen to loosen the glue. for these two reason i have marked this video down. For me it all started with a dead battery, the battery got changed but in the process the power port died (perhaps burnt in the process of using the heat gun to open the back)

[@northeastskinny]

It seems I have damaged the front screen which now sits above the rest of the phone. How do I secure it again in place please? ;)

[@CiderPang27]

100% easier and quicker to de solder the charge port and re solder a new one on. Doing it this way is a high risk of breaking the screen and un necessary. Looks easy when all the parts have been opened previously.

[@Altijdgamervids]

Is this possible while the port is still on the phone? No need to remove screen?

[@nathancercel3291]

does it matter what number (ex.SM-G925A) its is when we buy the new charging port or no ?

[@MovilonePhoneRepair]

Hello, Nathan! it s true that doesn t matter the letter of flex( G925F, G925A)Have a nice day! www.movilone.es

[@emadhamidnaja]

@@MovilonePhoneRepair god damn How wrong can someone be These are completely two different models One's from Exynos and another Snapdragon And they've a little bit of difference that's why they're sold differently and by their names to be specific .

[@nrgpirate]

My experience has been that you do NOT need to touch the front LCD, and yes it will damage it if you try. I got the charger port working great, but now need to replace the LCD. :( Mobile repair level two.

[@MovilonePhoneRepair]

Hello, Thomas! Sorry to hear that! Let me tell you, that if you use, in a delicate way, and touch the LCD screen ( i m talking about an original one, not repaired one) it is practically impossible to damage the screen .. we have done hundreds of repairs of the S6, if it was not going to happen at least once, I would tell you ... so no level 2 repair, believe me! Best regards

[@nrgpirate]

This was a variant of the edge, so I doubt any subtlety would have helped. There were already signs the sandwiched layer of the OEM screen was separating, and probably only a matter of time before it started to effect the actual LCD. Looking at it dissassembled, it was a substandard part. So once I have some cash flow, I am going to purchase a new screen and record my adventure. Best Regards camarada!!

[@captainb312]

Just wondering can you use a hair dryer instead

[@zurairkhan]

Nice

[@MG8102]

Is there any volume please.

[@misi4782]

Hello, i have been repairing phones from a while now but i never replaced the daughter board on this particular model. Tomorrow i got one s6 to repair and i am absolutely scared! Any tip? (I have any kind of tools from professional heaters to microscopes but these wont help here!) My fear is to crack the lcd.thanks

[@MovilonePhoneRepair]

Mi si, let say that it s not the easiest repair that i ve done. You have to have patience and ..some experience also :) will helps you, also! Here you can havo a look to this tutorial were with basic tools i performed an screen repair : kzbin.info/www/bejne/aHrRZYGJnbdogqM

[@misi4782]

@@MovilonePhoneRepair hello, well i did not breack the lcd neither the glass but i damaged the flat lying under the frame... So i gotta replace the whole assembly :/ i gone too deep with the guitar pick! Thanjs for the answer!

[@MovilonePhoneRepair]

:( Sorry to hear that! Thanks for asking and wish you good luck!

[@Quagmire1771]

What if you don't have a 9 of spades? I only have a 2 of diamonds. Jk lol. Thanks for the vid.

[@Red-ze8rl]

Seriously you have to remove all this shit just to change a charging port?

[@bosk_dzelski]

nah, it's just a prank bro

[@kil98q]

Vote for right to repair. this is the whole reason why its there ._. its even worse on newer models you cant really replace the glass without breaking the display

[@rickjeffjeff]

Just throw it away or use the induction charger.Phone is garbage after that

[@homeschoolingandawareness]

This is a lot of work.

[@MovilonePhoneRepair]

Thanks for your comment! Best regards

[@yeshecan7]

thank you very much ....very clear and simpel way for every body.

[@MovilonePhoneRepair]

Hello, Tefera!Thank you for your comment! Best regards

[@JM-yx1lm]

How come you dont just desolder the charhe port and solder a new one?

[@hudsonball4702]

The LCD screen is right behind the port. getting Solder or Soldering fluid on the LCD can ruin it.

[@emadhamidnaja]

@@hudsonball4702 no it doesn't Just put a thermal sheet Beneath the charging flex(between screen frame and the port) Then use proper soldering station He just complicated things for himself and the customer because the screen is loose now

[@metrocustomer2606]

So can you fix a smash charging port at home by using a USB charger charging portion a s6

[@noelmsoria2770]

how much you charge for the replacement, parts and labor?

[@MovilonePhoneRepair]

Hello, Nm Soria! We done this repair in our work shop, by 50 euros, more or less... if you have any question, please let me know! Best regards

[@759gamingyt2]

In Bangladesh... It will be repair in 2 euro.....

[@daveyfromdownsouth7889]

So im 14 and im trying to fix my moms phone. Where do i get the replacment part

[@MovilonePhoneRepair]

:) Nice to hear that! You can look on Aliexpress or eBay for the spare part. Wish you good luck and if you need more information, please let me know!

[@daveyfromdownsouth7889]

Thanks i was able to track it down

[@noonuu8557]

What happen if I heat out and replace only Micro USB piece ?

[@pabdulazeez6582]

It won't last long

[@surinderkhurana5109]

it will also work

[@CiderPang27]

I was constantly waiting for CRACK!

[@MovilonePhoneRepair]

Thanks for watching! Best regards

[@akmenskuum7165]

that aint how u replace a charging port

[@dmtrinidavid]

The one repair I absolutely HATE on Samsung. I'm at the point where if someone asks "what about Samsung S6 charging port?" I just reply "Oh, HELL NO!"

[@luckyluk2222]

You don't replace charging port but sub pcb. Fuck, lost 20 minutes

[@DamonLightfoot]

When this happens, just get a wireless charger, much easier than risking breaking your screen.

[@MovilonePhoneRepair]

Damon Lightfoot it s an opción 😀just that, in time you ll damage the battery also and the load won’t last same like if you ll charge yo te plug! 👋

[@bosk_dzelski]

kinda -yes. But what if you need to use and charge it in your car? Wireless car chargers are quite expensive

[@dalethomasdewitt]

The whole point is to only pry the cap-pad area avoiding any incursion into the screen. With good hands it's a low risk operation. I merely cut the pads off but only got back the erratic back button which prompted another $7.50 order. If I destroy the screen I'll amend this comment.

[@stukoyanimated2476]

crack shit your not a technician bro..

[@onlinetv4595]

Nice

[@MovilonePhoneRepair]

Thank you for watching our tutorial! Best regards