Samsung S7 Dead fix Samsung S7 Not turning on not charging 2025

[@computermobilephonedoctor]

excellent work video is amazing i just repaired Samsung s7 within two minute thank you so much

[@Lenzwalters]

You're welcome!

[@TenjinYoukai]

Do you know if internal data/memory & configs can be retained?

[@moshazza5684]

hi great video , my s7 was working, i was watching a video, it froze, went off and now wont turn on at all or charge, is this the issue. what is that thing you put on the chips..what purpose does i serve? if i do this will it solve my issue or is it my battery

[@makss1449]

I have the same problem and I need answers.

[@a96futurecreator96]

Did you solve it/ I have the same problem.

[@anasgamal8403]

Same

[@SeetLord]

Same problem mine is s7 edge please any solution?

[@xsAMOR]

He put some sdering flux on those 2 chips. Flux aids in soldering and desoldering processes by removing oxide films which form on the surface of metals being soldered. Maybe it would work with just re-heating. Mine went on after 3 years of laying in drawer, turned it on, charged over USB on PC, later nothing works, no combination with buttons. Will try to expose the phone on some heat without dissasemling it. Have some of you guys saved your phones?

[@faisalshazib592]

Thanks for this video. I have different situation, my s7 gave error during factory reset so i use vol and power button to exit reset but it has become dead and not responding to any combination of buttons and no charging indication..... What should I do ....plz guide

[@SamueleGiovane-xx9it]

It appens to me yesterday, i ve got my life in that phone. With this method my data are safe or i can t restore it anymore in any ways?

[@iliaszissiadis1167]

from the other side on m/board what you put ? when you heat is any danger to fall down any smd s from heat ? and the plug to protect from heat what you put ? , if i put aluminium foil is good ?

[@Mr.E.Shoppa]

It always gets down to the good old heat gun - this is for tech savvy people.

[@SeetLord]

Hello my s7 edge got same problem should i do this to fix it? And what u did exactly? thx

[@abhid.2679]

My device is showing the lightning bolt thing but it's not charging. Help!

[@Aviation1787]

Where did you buy the No-clean flux?

[@Lenzwalters]

ebay or aliexpress

[@sascha1684]

Vielen Dank hat super funktioniert.Wie auch immer das möglich ist.Flussmittel rma 223 bestellt,drauf gemacht und mit der guten alten DDR Heißluftpistole heiß gemacht.Siehe da Handy geht wieder an,Datenrettung war möglich.Vielen dank dafür

[@carlosmarx8053]

Hey Sascha, hab ein ähnliches Problem mit meinem S7 und auch die Paste bestellt. Meinst du, ich kann auch einen Fön verwenden anstelle der juten alten DDR-Pistole? ;)

[@sascha1684]

@@carlosmarx8053 nimm lieber die Heißluftpistole das funktioniert super.

[@sascha1684]

@@carlosmarx8053 Handy danach ein bisschen liegen lassen und nicht sofort an machen.

[@carlosmarx8053]

@@sascha1684 Danke für deine Antwort. Dann probiere ich das Trocknen der Paste mit dem Fön, hoffe die Temperatur ist dann hoch genug, damit es klappt.

[@itpcbk]

С обратной стороны процессор, подув на эти контроллеры Вы прогрели процессор, вот телефон и запустился на какое то время))

[@LauS0]

what temperature?

[@Lenzwalters]

400

[@farhadfarajzadeh2971]

@@Lenzwalters and pls tell how much air

[@pcdetail602]

What kind of flux is this ?

[@juliocesarcastillo3146]

exelecte gracias ok

[@tamoormaher3118]

Bro your voice is not clear try to make this video again and add subtitles. Thanks